Loading...

TIG DC welding inverter DD 2560T P 'Multi Line' incl. 3 m earth cable 35 mm², 4m E-holder cable 35 mm² & gas hose 2.5 m incl. QUICK FIT DN5 quick-change system

€ 1.090,80
€ 1.090,80 Incl. Tax
€ 909,00 Excl. Tax
In stock
SKU
  • Suitable for production/repair/maintenance/assembly companies as well as pipeline/metal/
    railing/machine/plant and container construction
  • Digital display for welding current (A) and special functions
  • Possibility of setting the complete TIG cycle incl. spot welding/pulse/2-cycle/4-cycle and repeat function
  • UP/DOWN current control at the TIG hose pack with a push button +/- 20 A, optionally also stepless 0-max. amps via potentiometer
  • The pulse frequency is adjustable from 0.5 -200 Hz and the balance from 5-95%, this allows for a better
    weld pool control, reduced heat input or deeper penetration
  • PFC TECHNOLOGY (DD 2050M P/PFC/MV only): Ensures a stable welding process
    even with fluctuating mains voltage, enables operation with power generators and long#xA;extension cables without negative effect on the welding arc
  • MULTIVOLTAGE (DD 2050M P/PFC/MV only): Design ensures wide range of applications, even abroad
  • Energy-saving, low open-circuit voltage, thermally controlled fan
  • The high efficiency meets the strict EU standards for environmentally friendly design
  • HOT START+ (adjustable 0-100%): Ignition current increase ensures better arc ignition
  • ARC FORCE+ (adjustable 0-100%): Increase of welding current when approaching the workpiece too closely in order to prevent sticking of the stick electrode and to achieve more uniform welding and deeper penetration
  • ANTI STICK: Automatic welding current reduction if the electrode sticks to prevent annealing and make it easier to detach it
  • JOB function: 10 welding programmes can be saved
  • GEN POWER: Operation possible by means of voltage-regulated current generator
  • EXTENSION: Can be used with up to 100 m extension cable (3 x 2.5 mm² or 5 x 2.5 mm²)
In stock, immediately available
Article Number: 15045  |  EAN: 9004853150456

Shipping

welding electrodes diameter: TIG 1.0-3.2 mm / MMA 1.6-5.0 mm

  • Suitable for production/repair/maintenance/assembly companies as well as pipeline/metal/
    railing/machine/plant and container construction
  • Digital display for welding current (A) and special functions
  • Possibility of setting the complete TIG cycle incl. spot welding/pulse/2-cycle/4-cycle and repeat function
  • UP/DOWN current control at the TIG hose pack with a push button +/- 20 A, optionally also stepless 0-max. amps via potentiometer
  • The pulse frequency is adjustable from 0.5 -200 Hz and the balance from 5-95%, this allows for a better
    weld pool control, reduced heat input or deeper penetration
  • PFC TECHNOLOGY (DD 2050M P/PFC/MV only): Ensures a stable welding process
    even with fluctuating mains voltage, enables operation with power generators and long#xA;extension cables without negative effect on the welding arc
  • MULTIVOLTAGE (DD 2050M P/PFC/MV only): Design ensures wide range of applications, even abroad
  • Energy-saving, low open-circuit voltage, thermally controlled fan
  • The high efficiency meets the strict EU standards for environmentally friendly design
  • HOT START+ (adjustable 0-100%): Ignition current increase ensures better arc ignition
  • ARC FORCE+ (adjustable 0-100%): Increase of welding current when approaching the workpiece too closely in order to prevent sticking of the stick electrode and to achieve more uniform welding and deeper penetration
  • ANTI STICK: Automatic welding current reduction if the electrode sticks to prevent annealing and make it easier to detach it
  • JOB function: 10 welding programmes can be saved
  • GEN POWER: Operation possible by means of voltage-regulated current generator
  • EXTENSION: Can be used with up to 100 m extension cable (3 x 2.5 mm² or 5 x 2.5 mm²)

Advantages

  • Suitable for production/repair/maintenance/assembly companies as well as pipeline/metal/
    railing/machine/plant and container construction
  • Digital display for welding current (A) and special functions
  • Possibility of setting the complete TIG cycle incl. spot welding/pulse/2-cycle/4-cycle and repeat function
  • UP/DOWN current control at the TIG hose pack with a push button +/- 20 A, optionally also stepless 0-max. amps via potentiometer
  • The pulse frequency is adjustable from 0.5 -200 Hz and the balance from 5-95%, this allows for a better
    weld pool control, reduced heat input or deeper penetration
  • PFC TECHNOLOGY (DD 2050M P/PFC/MV only): Ensures a stable welding process
    even with fluctuating mains voltage, enables operation with power generators and long#xA;extension cables without negative effect on the welding arc
  • MULTIVOLTAGE (DD 2050M P/PFC/MV only): Design ensures wide range of applications, even abroad
  • Energy-saving, low open-circuit voltage, thermally controlled fan
  • The high efficiency meets the strict EU standards for environmentally friendly design
  • HOT START+ (adjustable 0-100%): Ignition current increase ensures better arc ignition
  • ARC FORCE+ (adjustable 0-100%): Increase of welding current when approaching the workpiece too closely in order to prevent sticking of the stick electrode and to achieve more uniform welding and deeper penetration
  • ANTI STICK: Automatic welding current reduction if the electrode sticks to prevent annealing and make it easier to detach it
  • JOB function: 10 welding programmes can be saved
  • GEN POWER: Operation possible by means of voltage-regulated current generator
  • EXTENSION: Can be used with up to 100 m extension cable (3 x 2.5 mm² or 5 x 2.5 mm²)

More Information

More Information
EAN-Number 9004853150456
No parcel service shipping Yes
Article Group "Special Programme" Yes
Product-Highlights
  • TIG/TIG DC welding inverter

    Portable TIG/TIG welding inverters with modern IGBT design for direct current (DC) welding of steel, stainless steel and copper. Switchable between MMA/E-hand welding, HF TIG welding with non-contact high-frequency ignition and LIFT TIG welding (without HF).
Substitute product 55447
Files
    ELMAG - Technical details elmag_merk_269 | TIG 1.0-3.2 mm / MMA 1.6-5.0 | mm \ elmag_merk_256 | TIG/MMA: 5-250 | A \ elmag_merk_258 | TIG/MMA: 100 / 195 | A \ elmag_merk_260 | TIG/MMA: 60 / 250 | % / A \ AAC617f001 | 73 | V \ elmag_merk_261 | 400 / 3 | V / ~ \ elmag_merk_274 | +10 / -10 | % \ elmag_merk_262 | 16 | AT \ EAA670f001 | IP23 | \ elmag_merk_2165 | 80 | % \ elmag_merk_2166 | 39 | W \ elmag_merk_279 | TIG 14 / 11 A | MMA 18 / 14 | A \ elmag_merk_834 | 13 / 35 | O / mm2 \ elmag_merk_264 | CEE 16 A | \ AAA472f001 | 190 | mm \ AAA031f001 | 365 | mm \ AAA003f001 | 12.6 | kg \
    Low Stock Amount 2
    ELMAG goods group 1
    Filter-Category Maschinen/Geräte
    3 years warranty possible full
    Planned stock decrease 1
    Planned stock increase 0
    HNP/SP-Price € 680,00
    HNP/SP-Info Tier 1,680.00
    HNP/SP-Preis 39 € 721,00
    HNP/SP-Sonderpreis 39 € 0,00
    Staffel HNP/SP-Info 39 1,721.00
    Previous URL Key tig-dc-welding-inverter-dd-2560t-p-15045

    Specifications

    welding electrodes diameter TIG 1.0-3.2 mm / MMA 1.6-5.0 mm
    welding current setting TIG/MMA: 5-250 A
    100 % welding power source (10 min at 40 °C) at welding current TIG/MMA: 100 / 195 A
    welding power source (10 min at 40 °C) at welding current TIG/MMA: 60 / 250 % / A
    Open circuit voltage 73 V
    voltage / phases 400 / 3 V / ~
    power tolerance +10 / -10 %
    anti-surge fuse 16 AT
    Degree of protection (IP) IP23
    Efficiency 80 %
    power consumption in idle mode 39 W
    input power l1 max. / l1 eff. TIG 14 / 11 A | MMA 18 / 14 A
    ground connection plug / cross-section 13 / 35 O / mm2
    connector CEE 16 A
    Depth 190 mm
    Height 365 mm
    Weight 12.6 kg

    Substitute

    This article could be an alternative for you:

    ALTERNATIVE PRODUCTS
    TIG AC/DC welding inverter AD 2540T P “Multi Line”
    € 2.304,00
    € 2.304,00 Incl. Tax
    € 1.920,00 Excl. Tax
    available again from week no. 48/2024
    Benefit from a 2-year ELMAG warranty
    or extend it to 3 years by registering at
    elmag.eu/3years

    Quick enquiry

    The data entered above is stored and processed by "ELMAG Entwicklungs und Handels GmbH", Hannesgrub Nord 19 - A-4911 Ried / Tumeltsham and the service providers (marketing agency, hosting partner, ERP software partner) commissioned by "ELMAG Entwicklungs und Handels GmbH", for the purpose of processing and answering my request. For more information, please see our privacy policy.

     

    Shipping duration display on product detail page:
    This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.