TIG AC/DC welding inverter AD 2060M P/PFC/MV 'Multi Line' incl. 3 m earth cable 25 mm², 4m E-holder cable 25 mm² & gas hose 2.5 m incl. QUICK FIT DN5 quick-change system
€ 1.836,00
€ 1.836,00
Incl. Tax
€ 1.530,00
Excl. Tax
In stock
SKU
- Suitable for production/repair/maintenance/assembly companies as well as pipeline/metal/railing/machine/plant and container construction
- Digital display for welding current (A) and special functions
- Possibility of setting the complete TIG cycle incl. spot welding/pulse/2-cycle/4-cycle and
repeat function - DC direct current, AC square waveform, AC sine waveform selection
- UP/DOWN current control at the TIG hose pack with a push button +/- 20 A, optionally also stepless 0-max. amps via potentiometer
- The pulse frequency is adjustable from 0.3 -999 Hz and the balance from 5-95%, this allows for a better
weld pool control, reduced heat input or deeper penetration - Furthermore, the AC balance (+/-5) and the AC frequency (50-250 Hz) can be used to influence the
cleaning effect and arc concentration during aluminium welding - PFC TECHNOLOGY (Power Factor Correction): Ensures a stable welding process even with
fluctuating mains voltage without any negative effect on the welding arc - MULTIVOLTAGE: Design ensures wide range of applications, even abroad
- Energy-saving, low open-circuit voltage, thermally controlled fan
- The high efficiency meets the strict EU standards for environmentally friendly design
- HOT START+ (adjustable 0-100%): Ignition current increase ensures better arc ignition
- ARC FORCE+ (adjustable 0-100%): Increase in welding current when approaching the workpiece too closely to prevent sticking of the rod electrode as well as more uniform welding and deeper penetration
- ANTI STICK: Automatic welding current reduction if the electrode sticks to prevent annealing zu
and make it easier to detach it - JOB Function: 9 welding programmes can be stored
- GEN POWER: Operation possible by means of voltage-regulated current generator
- EXTENSION: Can be used with up to 100 m extension cable (3 x 2.5 mm²)
In stock, immediately available
Article Number: 15060
|
EAN: 9004853150609
welding electrodes diameter: 230 V: TIG 1.0-4.0 mm / MMA 1.6-5.0 mm | 110 V: TIG 1.0-3.2 mm / MMA 1.6-3.2 mm
Downloads
- Suitable for production/repair/maintenance/assembly companies as well as pipeline/metal/railing/machine/plant and container construction
- Digital display for welding current (A) and special functions
- Possibility of setting the complete TIG cycle incl. spot welding/pulse/2-cycle/4-cycle and
repeat function - DC direct current, AC square waveform, AC sine waveform selection
- UP/DOWN current control at the TIG hose pack with a push button +/- 20 A, optionally also stepless 0-max. amps via potentiometer
- The pulse frequency is adjustable from 0.3 -999 Hz and the balance from 5-95%, this allows for a better
weld pool control, reduced heat input or deeper penetration - Furthermore, the AC balance (+/-5) and the AC frequency (50-250 Hz) can be used to influence the
cleaning effect and arc concentration during aluminium welding - PFC TECHNOLOGY (Power Factor Correction): Ensures a stable welding process even with
fluctuating mains voltage without any negative effect on the welding arc - MULTIVOLTAGE: Design ensures wide range of applications, even abroad
- Energy-saving, low open-circuit voltage, thermally controlled fan
- The high efficiency meets the strict EU standards for environmentally friendly design
- HOT START+ (adjustable 0-100%): Ignition current increase ensures better arc ignition
- ARC FORCE+ (adjustable 0-100%): Increase in welding current when approaching the workpiece too closely to prevent sticking of the rod electrode as well as more uniform welding and deeper penetration
- ANTI STICK: Automatic welding current reduction if the electrode sticks to prevent annealing zu
and make it easier to detach it - JOB Function: 9 welding programmes can be stored
- GEN POWER: Operation possible by means of voltage-regulated current generator
- EXTENSION: Can be used with up to 100 m extension cable (3 x 2.5 mm²)
Advantages
- Suitable for production/repair/maintenance/assembly companies as well as pipeline/metal/railing/machine/plant and container construction
- Digital display for welding current (A) and special functions
- Possibility of setting the complete TIG cycle incl. spot welding/pulse/2-cycle/4-cycle and
repeat function - DC direct current, AC square waveform, AC sine waveform selection
- UP/DOWN current control at the TIG hose pack with a push button +/- 20 A, optionally also stepless 0-max. amps via potentiometer
- The pulse frequency is adjustable from 0.3 -999 Hz and the balance from 5-95%, this allows for a better
weld pool control, reduced heat input or deeper penetration - Furthermore, the AC balance (+/-5) and the AC frequency (50-250 Hz) can be used to influence the
cleaning effect and arc concentration during aluminium welding - PFC TECHNOLOGY (Power Factor Correction): Ensures a stable welding process even with
fluctuating mains voltage without any negative effect on the welding arc - MULTIVOLTAGE: Design ensures wide range of applications, even abroad
- Energy-saving, low open-circuit voltage, thermally controlled fan
- The high efficiency meets the strict EU standards for environmentally friendly design
- HOT START+ (adjustable 0-100%): Ignition current increase ensures better arc ignition
- ARC FORCE+ (adjustable 0-100%): Increase in welding current when approaching the workpiece too closely to prevent sticking of the rod electrode as well as more uniform welding and deeper penetration
- ANTI STICK: Automatic welding current reduction if the electrode sticks to prevent annealing zu
and make it easier to detach it - JOB Function: 9 welding programmes can be stored
- GEN POWER: Operation possible by means of voltage-regulated current generator
- EXTENSION: Can be used with up to 100 m extension cable (3 x 2.5 mm²)
More Information
| EAN-Number | 9004853150609 |
|---|---|
| No parcel service shipping | Yes |
| Article Group "Special Programme" | Yes |
| Product-Highlights |
|
| Substitute product | 55447 |
| Files | |
| ELMAG - Technical details | elmag_merk_269 | 230 V: TIG 1.0-4.0 mm / MMA 1.6-5.0 mm | 110 V: TIG 1.0-3.2 mm / MMA 1.6-3.2 | mm \ elmag_merk_256 | 230 V: TIG 5-200 A / MMA 5-200 A | 110 V: TIG 5-160 A / MMA 5-130 | A \ elmag_merk_258 | 230 V: TIG 100 / 155% / A / MMA 100 / 110% / A | 110 V: TIG 100 / 125% / A / MMA 100 / 105 | A \ elmag_merk_260 | 230 V: TIG 60 / 200% / A / MMA 35 / 200% / A | 110 V: TIG 90 / 130 % / A / MMA 60 / 130 | % / A \ AAC617f001 | 67 | V \ elmag_merk_261 | 230 / 1 | 110 / 1 | V / ~ \ elmag_merk_274 | 230 V: +15 / -60% | 110 V: +150/-15 | % \ elmag_merk_262 | 230 V: TIG/MMA 16/32 AT | 110 V: TIG/MMA 32/63 | AT \ EAA670f001 | IP23 | \ elmag_merk_2165 | 85 | % \ elmag_merk_2166 | 230 V: 42.6 W | 110 V: 43.9 | W \ elmag_merk_279 | 230 V: TIG 21 / 16 A / MMA 32 / 19 A | 110V: TIG 32 / 25 A / MMA 40 / 22 | A \ elmag_merk_834 | 13 / 25 | O / mm2 \ elmag_merk_264 | Safety plug 16 A | \ AAA040f001 | 610 | mm \ AAA472f001 | 190 | mm \ AAA031f001 | 375 | mm \ AAA003f001 | 15.5 | kg \ |
| Low Stock Amount | 9 |
| ELMAG goods group | 1 |
| Filter-Category | Maschinen/Geräte |
| 3 years warranty possible | full |
| Planned stock decrease | 0 |
| Planned stock increase | 60 |
| HNP/SP-Price | € 1.145,00 |
| HNP/SP-Info Tier | 1,1145.00 |
| HNP/SP-Preis 39 | € 1.215,00 |
| HNP/SP-Sonderpreis 39 | € 0,00 |
| Staffel HNP/SP-Info 39 | 1,1215.00 |
| Previous URL Key | tig-ac-dc-welding-inverter-ad-2060m-p-pfc-mv-15060 |
Specifications
| welding electrodes diameter | 230 V: TIG 1.0-4.0 mm / MMA 1.6-5.0 mm | 110 V: TIG 1.0-3.2 mm / MMA 1.6-3.2 mm |
| welding current setting | 230 V: TIG 5-200 A / MMA 5-200 A | 110 V: TIG 5-160 A / MMA 5-130 A |
| 100 % welding power source (10 min at 40 °C) at welding current | 230 V: TIG 100 / 155% / A / MMA 100 / 110% / A | 110 V: TIG 100 / 125% / A / MMA 100 / 105 A |
| welding power source (10 min at 40 °C) at welding current | 230 V: TIG 60 / 200% / A / MMA 35 / 200% / A | 110 V: TIG 90 / 130 % / A / MMA 60 / 130 % / A |
| Open circuit voltage | 67 V |
| voltage / phases | 230 / 1 | 110 / 1 V / ~ |
| power tolerance | 230 V: +15 / -60% | 110 V: +150/-15 % |
| anti-surge fuse | 230 V: TIG/MMA 16/32 AT | 110 V: TIG/MMA 32/63 AT |
| Degree of protection (IP) | IP23 |
| Efficiency | 85 % |
| power consumption in idle mode | 230 V: 42.6 W | 110 V: 43.9 W |
| input power l1 max. / l1 eff. | 230 V: TIG 21 / 16 A / MMA 32 / 19 A | 110V: TIG 32 / 25 A / MMA 40 / 22 A |
| ground connection plug / cross-section | 13 / 25 O / mm2 |
| connector | Safety plug 16 A |
| Width | 610 mm |
| Depth | 190 mm |
| Height | 375 mm |
| Weight | 15.5 kg |
Substitute
This article could be an alternative for you:
Downloads
Data sheet:
Product picture
Bedienungsanleitung_AD_2060M_P-PFC-MV_DE+WK1_MINI_15100_DE_V2_ab_SN_1.0002.0367-EA_12504010001
Bedienungsanleitung_AD_2060M_P-PFC-MV_DE+WK1_MINI_15100_DE_V1
Bedienungsanleitung_AD_2060M_P-PFC-MV_EN+WK1_MINI_15100_EN_V2_ab_SN_1.0002.0367-EA_12504010001
Bedienungsanleitung_AD_2060M_P-PFC-MV_EN+WK1_MINI_15100_EN_V1
€ 973,20
€ 973,20
Incl. Tax
€ 811,00
Excl. Tax
In stock, immediately available
€ 1.135,20
€ 1.135,20
Incl. Tax
€ 946,00
Excl. Tax
Residual amounts available
€ 2.400,00
€ 2.400,00
Incl. Tax
€ 2.000,00
Excl. Tax
Residual amounts available
Shipping duration display on product detail page:
This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.
