TOPSELLER
- SKU: 10031Compressor MEISTER 610/10/100 D390 l/min 553 l/min 10 bar 100 l Electric motor mobile 3 / 4 kW / HP 400/50 V/Hz Show more
Specifications
Effective delivery amount 390 l/min Delivery quantity according to VDMA 4362, measured at 80% of the maximum pressure Yes Suction power 553 l/min Max. operation pressure 10 bar Oil lubricated Yes Container volume 100 l type Electric motor model mobile Motor nominal power 3 / 4 kW / HP electrical connection voltage / frequency 400/50 V/Hz Sound pressure level (4 m) 74 dB(A) rotational speed compressor 1300 rpm Length 1130 mm Height 910 mm Weight 86 kg € 1.596,00€ 1.596,00 Incl. Tax€ 1.330,00 Excl. TaxIn stock, immediately available - SKU: 33300Hand pallet truck 'HW 2500'2500 kg 540 mm 1150 mm 80 mm 200 mm 75 kg Show more
Specifications
Lifting capacity 2500 kg Fork width 540 mm Fork length 1150 mm 80 mm Max. stroke height 200 mm Weight 75 kg € 418,80Special price because of Anniversary Highlights November 2024 - February 2025 (until 28 February 2025)€ 418,80 Incl. Tax€ 349,00 Excl. TaxNormal-Price
Incl. Tax: € 478,80 -13%In stock, immediately available - SKU: 16036KBM 16 T VARIO SET action16 mm MK 2 340 - 2200 rpm continuously variable 90 mm 60 mm 14 mm 275 mm Show more
Specifications
drilling capacity in steel 16 mm mandrel holding fixture (screw mandrel) MK 2 speed range 340 - 2200 rpm speed gradually continuously variable quill stroke 90 mm column diameter 60 mm t-slot width 14 mm drill table lift 275 mm mandrel radius 150 mm drill table swiveling ± 45 ° drill table revolving ± 180 ° quill distance table min./max. 360 mm drilling table surface 243x243 mm motor power 550 W voltage 230/50 V/Hz cubature 195x195x360 mm base plate surface 250x415 mm height (total) 910 mm Weight 42 kg € 498,00Special price because of Anniversary Highlights November 2024 - February 2025 (until 28 February 2025)€ 498,00 Incl. Tax€ 415,00 Excl. TaxNormal-Price
Incl. Tax: € 672,00 -26%In stock, immediately available - SKU: 53199Electricity generator SEB 16000WDE-AVR400 / 230/50 V/Hz 16 kVA 14.4 kVA 21 A 5.8 kVA 5.3 kVA 23 A Petrol Show more
Specifications
voltage frequency 400 / 230/50 V/Hz maximum power 3~400V 16 kVA continuous power 3~400V 14.4 kVA power 3~400V continuous 21 A maximum power 1~230V 5.8 kVA continuous power 1 ~ 230V 5.3 kVA Power 1 ~ 230V continuous 23 A fuel Petrol rotational 3000 rpm cooling air-cooled engine type Honda GX 690 emission level 5 engine power 15 kW capacity 688 cm3 cylinder 2 tank capacity 20 l consumption at 75% load 5 l/h Running time per tank filling at 75% load 4 h dimensions lxbxh 1020x550x600 mm weight (without fuel) 154 kg sound pressure level in 7m 75 dB(A) € 4.920,00Special price because of Anniversary Highlights November 2024 - February 2025 (until 28 February 2025)€ 4.920,00 Incl. Tax€ 4.100,00 Excl. TaxNormal-Price
Incl. Tax: € 6.684,00 -26%In stock, immediately available - SKU: 00754SEDSS 243WDE-AVR-DSE4520-V2 generator400 / 230/50 V/Hz 24 kVA 23 kVA 33 A 8.8 kVA 8 kVA 35 A Diesel Show more
Specifications
voltage frequency 400 / 230/50 V/Hz maximum power 3~400V 24 kVA continuous power 3~400V 23 kVA power 3~400V continuous 33 A maximum power 1~230V 8.8 kVA continuous power 1 ~ 230V 8 kVA Power 1 ~ 230V continuous 35 A fuel Diesel rotational 3000 rpm cooling water-cooled engine type Kubota V1505 emission level - engine power 27 kW capacity 1498 cm3 cylinder 4 tank capacity 73 l consumption at 75% load 5 l/h Running time per tank filling at 75% load 14.6 h dimensions lxbxh 1700x740x1100 mm weight (without fuel) 572 kg sound power complies with RL 2000/14/EG, 2005/88/EG 96 LWA sound pressure level in 7m 71 dB(A) € 22.560,00Special price because of Anniversary Highlights November 2024 - February 2025 (until 28 February 2025)€ 22.560,00 Incl. Tax€ 18.800,00 Excl. TaxNormal-Price
Incl. Tax: € 25.092,00 -10%In stock, immediately available - SKU: 82158Universal milling machine UFM 1230 Servodrive125 mm 1130x460x480 mm 40 mm ISO 40 30 - 2050 rpm 27 5 / 18 x 80 mm 47 - 695 mm Show more
Specifications
face mills milling capacity 125 mm cubature 1130x460x480 mm end mills milling capacity 40 mm mandrel holding fixture (screw mandrel) ISO 40 speed range 30 - 2050 rpm speed gradually 27 T-slot / width x distance 5 / 18 x 80 mm mandrel radius 47 - 695 mm milling head swivel range ± 180 ° quill distance table min./max. 32 - 480 mm table load capacity 800 kg router table stroke 450 mm router table surface 1130x460 mm table length X x Y 900 x 650 mm feeds X/Y 10 - 1000 mm/min feed steps X/Y continuously variable feed Z 6 - 640 mm/min Moment of torque 15/15/18 Nm motor power 5500 W voltage 400/50 V/Hz length x width 2680 x 1800 mm Height 2100 mm Weight 4000 kg € 55.068,00Special price because of Warehouse-Sale 2024 (until 31 December 2024)€ 55.068,00 Incl. Tax€ 45.890,00 Excl. TaxNormal-Price
Incl. Tax: € 61.860,00 -11%Residual amounts available - SKU: 52904ENERGY 2400 portable power stationLIFEPO4 2.232 kWh pure sine wave 425x275x315 mm 25 kg 5000 W 2400 W 400 W Show more
Specifications
Battery type LIFEPO4 battery capacity 2.232 kWh Voltage type pure sine wave dimensions lxbxh 425x275x315 mm Weight 25 kg maximum power 1~230V 5000 W continuous power 1 ~ 230V 2400 W Maximum charging power 400 W € 1.800,00Special price because of Anniversary Highlights November 2024 - February 2025 (until 28 February 2025)€ 1.800,00 Incl. Tax€ 1.500,00 Excl. TaxNormal-Price
Incl. Tax: € 2.550,00 -29%In stock, immediately available - SKU: 54017Inert gas welding machine EUROMIG plus 2540,5 - 10 mm 0,6 - 1,2 mm 15,25 - 26,5 V 1,0 - 1,2 mm 200 / 300 mm 5/15 kg 25 - 250 A 10 Num. Show more
Specifications
Material thickness 0,5 - 10 mm steel / stainless steel wire diameter 0,6 - 1,2 mm welding voltage adjustment 15,25 - 26,5 V aluminium wire diameter 1,0 - 1,2 mm welding wire roll diameter 200 / 300 mm welding wire roll weight 5/15 kg welding current setting 25 - 250 A welding current switching stages 10 Num. ground connection plug / cross-section 9 / 25 O / mm2 welding power source (10 min at 40 °C) at welding current 20 / 250 % / A holding capacity max 16 A voltage / phases 400 / 3 V / ~ Mains frequency 50 Hz anti-surge fuse 16 AT Degree of protection (IP) 21 S feed drive 2 Rollers connector CEE 16 A Depth 750 mm Height 640 mm Weight 75 kg € 1.762,80Special price because of Anniversary Highlights November 2024 - February 2025 (until 28 February 2025)€ 1.762,80 Incl. Tax€ 1.469,00 Excl. TaxNormal-Price
Incl. Tax: € 2.316,00 -24%In stock, immediately available - SKU: 53196Generator SEB 7500WD-AVR400 / 230/50 V/Hz 8 kVA 7.2 kVA 10 A 3.8 kVA 3.4 kVA 14.4 A Petrol Show more
Specifications
voltage frequency 400 / 230/50 V/Hz maximum power 3~400V 8 kVA continuous power 3~400V 7.2 kVA power 3~400V continuous 10 A maximum power 1~230V 3.8 kVA continuous power 1 ~ 230V 3.4 kVA Power 1 ~ 230V continuous 14.4 A fuel Petrol rotational 3000 rpm cooling air-cooled engine type Honda GX 390 emission level 5 engine power 8,2 kW capacity 389 cm3 cylinder 1 tank capacity 6.1 l consumption at 75% load 2.8 l/h Running time per tank filling at 75% load 2.2 h dimensions lxbxh 830x510x560 mm weight (without fuel) 91 kg sound power complies with RL 2000/14/EG, 2005/88/EG 97 LWA sound pressure level in 7m 72 dB(A) € 2.376,00Special price because of Anniversary Highlights November 2024 - February 2025 (until 28 February 2025)€ 2.376,00 Incl. Tax€ 1.980,00 Excl. TaxNormal-Price
Incl. Tax: € 3.546,00 -33%In stock, immediately available - SKU: 81350Hydraulic plate shears HGS-A 3100x6 mm3100 mm 6 mm 4 mm 0.05 - 0.8 mm 20 1/min 14 Num. 12 t 11 kW Show more
Specifications
Cut length 3100 mm cutting capacity 42 kg/mm² 6 mm cutting capacity 70 kg/mm² 4 mm kerf min. / max. 0.05 - 0.8 mm Stroke rate 20 1/min downholder 14 Num. downholder pressure 12 t main drive engine power 11 kW backgauge engine power 0.75 kW backgauge adjustment 1000 mm adjusting speed 110 mm/s Cutting angle 1.2 ° Desk length 3400 mm support arms 2 Num. width without support arms 2410 mm transport width 2100 mm Desk height 800 mm oil tank volume 150 l Length 4000 mm Height 1640 mm Weight 5500 kg € 0,00Special price because of Warehouse-Sale 2024 (until 31 December 2024)€ 44.544,00 Incl. Tax€ 37.120,00 Excl. TaxNormal-Price
Incl. Tax: € 0,00Residual amounts available - SKU: 82029Radial column drilling machine RSBM 5/60 Touch Vario60 mm M45 MK 5 38-2000 rpm 315 mm (table/base) 22/28 mm 900 mm 350-1600 mm Show more
Specifications
drilling capacity in steel 60 mm thread cutting performance M45 mandrel holding fixture (screw mandrel) MK 5 speed range 38-2000 rpm quill stroke 315 mm t-slot width (table/base) 22/28 mm drill head lift 900 mm mandrel radius 350-1600 mm drill head revolving ± 180 ° quill distance socket 1220 mm quill distance table min./max. 0-720 mm drilling table surface 630x500 mm drilling table height 500 mm motor power 4000 W lifting spindle engine 1500 W voltage 400/50 V/Hz automatic quick feed rate Yes coolant pump 90 W cooling pump performance 25 l/min cubature 630x500x720 mm length x width 2490x1050 mm height (total) 2780 mm Weight 3800 kg € 33.948,00Special price because of Metalworking action folder (until 31 March 2025)€ 33.948,00 Incl. Tax€ 28.290,00 Excl. TaxNormal-Price
Incl. Tax: € 45.720,00 -26%Residual amounts available - SKU: 54008Shielding gas welding system PROFI-MIG 3000 plus / MIG 3040,5 - 12 mm 0,6 - 1,2 mm 15,5 - 29 V 1,0 - 1,2 mm 200 / 300 mm 5/15 kg 30 - 300 A 2 x 10 Num. Show more
Specifications
Material thickness 0,5 - 12 mm steel / stainless steel wire diameter 0,6 - 1,2 mm welding voltage adjustment 15,5 - 29 V aluminium wire diameter 1,0 - 1,2 mm welding wire roll diameter 200 / 300 mm welding wire roll weight 5/15 kg welding current setting 30 - 300 A welding current switching stages 2 x 10 Num. ground connection plug / cross-section 13 / 50 O / mm2 welding power source (10 min. at 40 °C) at welding current 165 A welding power source (10 min at 40 °C) at welding current 30 / 300 % / A holding capacity max 20,2 A voltage / phases 400 / 3 V / ~ Mains frequency 50 Hz anti-surge fuse 16 AT Degree of protection (IP) 21 S feed drive 4 Rollers connector CEE 16 A Depth 850 mm Height 780 mm Weight 95 kg € 2.398,80Special price because of Anniversary Highlights November 2024 - February 2025 (until 28 February 2025)€ 2.398,80 Incl. Tax€ 1.999,00 Excl. TaxNormal-Price
Incl. Tax: € 2.976,00 -19%In stock, immediately available - SKU: 82013Gear column drill GBM 4/35 SGA Set35 mm M22 MK 4 75 - 3010 rpm 8 150 mm 4 125 mm Show more
Specifications
drilling capacity in steel 35 mm thread cutting performance M22 mandrel holding fixture (screw mandrel) MK 4 speed range 75 - 3010 rpm speed gradually 8 quill stroke 150 mm quill feed levels 4 column diameter 125 mm t-slot width 14 mm drill table lift 500 mm mandrel radius 320 mm drill table revolving ± 180 ° drill head revolving ± 180 ° quill distance table min./max. 10 - 860 mm drilling table surface 500x400 mm motor power (2-stage) 1500 / 1800 W voltage 400/50 V/Hz cubature 500x350x860 mm base plate surface 700x600 mm height (total) 1950 mm Weight 275 kg € 7.224,00€ 7.224,00 Incl. Tax€ 6.020,00 Excl. TaxIn stock, immediately available - SKU: 53046Inverter generator SEBSS 3000Wi230/50 V/Hz 3 kVA 2.6 kVA 11 A 12 V 8.3 / 5 V 2 A Petrol air-cooled MZ175 Show more
Specifications
voltage frequency 230/50 V/Hz maximum power 1~230V 3 kVA continuous power 1 ~ 230V 2.6 kVA Power 1 ~ 230V continuous 11 A power 12VDC A continuous 12 V 8.3 / 5 V 2 A fuel Petrol cooling air-cooled engine type MZ175 engine power 3,5 kW capacity 171 cm3 cylinder 1 tank capacity 6 l consumption at 75% load 1.6 l/h Running time per tank filling at 75% load 4 h dimensions lxbxh 600 x 450 x 520 mm weight (without fuel) 41 kg sound power complies with RL 2000/14/EG, 2005/88/EG 96 LWA sound pressure level in 7m 71 dB(A) € 1.296,00Special price because of Anniversary Highlights November 2024 - February 2025 (until 28 February 2025)€ 1.296,00 Incl. Tax€ 1.080,00 Excl. TaxNormal-Price
Incl. Tax: € 2.088,00 -38%In stock, immediately available - SKU: 82133Universal milling machine125 mm 40 mm 1120x260x500 mm ISO 40 45 - 1660 rpm 11 45 - 1660 rpm 90 W Show more
Specifications
face mills milling capacity 125 mm end mills milling capacity 40 mm cubature 1120x260x500 mm mandrel holding fixture (screw mandrel) ISO 40 rotational speed vertical 45 - 1660 rpm speed gradually vertical 11 rotational speed horizontal 45 - 1660 rpm coolant pump 90 W speed gradually horizontal 11 T-slot / width x distance 5 / 14 x 50 mm mandrel radius 60 - 500 mm milling head swivel range ± 180 ° quill distance table min./max. 80 - 500 mm horizontal spindle distance table 40 - 470 mm router table stroke 420 mm router table surface 1120x260 mm table length X x Y 600 x 300 mm feeds X/Y 24 - 402 mm/min feed steps X/Y 9 feed Z 1200 mm/min motor power 2200 W feed drive X/Y 550 W feed drive Z 750 W voltage 400/50 V/Hz length x width 1655 x 1325 mm Height 1730 mm Weight 1480 kg € 22.866,00€ 22.866,00 Incl. Tax€ 19.055,00 Excl. TaxResidual amounts available - SKU: 16037KBM 25 S VARIO SET action25 mm MK 3 440 - 2200 rpm continuously variable 150 mm 80 mm 14 mm 475 mm Show more
Specifications
drilling capacity in steel 25 mm mandrel holding fixture (screw mandrel) MK 3 speed range 440 - 2200 rpm speed gradually continuously variable quill stroke 150 mm column diameter 80 mm t-slot width 14 mm drill table lift 475 mm mandrel radius 215 mm drill table swiveling ± 45 ° drill table revolving ± 180 ° quill distance table min./max. 365 mm drilling table surface 356x356 mm motor power 1500 W voltage 400/50 V/Hz cubature 285x285x635 mm base plate surface 420x580 mm height (total) 1820 mm Weight 95 kg € 1.536,00€ 1.536,00 Incl. Tax€ 1.280,00 Excl. TaxIn stock, immediately available - SKU: 82007GBM 3/30 SNA gear column drill - set30 mm M22 MK 3 75 - 3010 rpm 8 150 mm 4 105 mm Show more
Specifications
drilling capacity in steel 30 mm thread cutting performance M22 mandrel holding fixture (screw mandrel) MK 3 speed range 75 - 3010 rpm speed gradually 8 quill stroke 150 mm quill feed levels 4 column diameter 105 mm t-slot width 14 mm drill head lift 270 mm drill table lift 500 mm mandrel radius 320 mm drill table revolving ± 180 ° drill head revolving ± 180 ° quill distance table min./max. 50 - 820 mm drilling table surface 500x350 mm motor power (2-stage) 900 / 1200 W voltage 400/50 V/Hz cubature 500x350x870 mm base plate surface 400x670 mm Weight 210 kg € 5.868,00€ 5.868,00 Incl. Tax€ 4.890,00 Excl. TaxIn stock, immediately available - SKU: 11022Compressor PROFI-LINE PL 840/10/200 D595 l/min 850 l/min 10 bar 200 l mobile 5,5 / 7,5 kW / HP 400/50 V/Hz 76 dB(A) Show more
Specifications
Effective delivery amount 595 l/min Delivery quantity according to VDMA 4362, measured at 80% of the maximum pressure Yes Suction power 850 l/min Max. operation pressure 10 bar Oil lubricated Yes Container volume 200 l model mobile Motor nominal power 5,5 / 7,5 kW / HP electrical connection voltage / frequency 400/50 V/Hz Sound pressure level (4 m) 76 dB(A) rotational speed compressor 1150 rpm Air outflow 2-Jan inches Length 1550 mm Height 1250 mm Weight 160 kg € 2.398,80Special price because of Anniversary Highlights November 2024 - February 2025 (until 28 February 2025)€ 2.398,80 Incl. Tax€ 1.999,00 Excl. TaxNormal-Price
Incl. Tax: € 3.120,00 -23%Residual amounts available - SKU: 78913BOMAR metal bandsaw20 mm 5 mm 410 kg semi-automatic 20 - 120 m/min 3380x25(27)x0.9 mm 1800x1570x2100 mm 760 mm Show more
Specifications
20 mm 5 mm Weight 410 kg operating mode semi-automatic bandsaw speed 20 - 120 m/min bandsaw dimensions 3380x25(27)x0.9 mm Dimensions 1800x1570x2100 mm 760 mm € 13.842,00€ 13.842,00 Incl. Tax€ 11.535,00 Excl. TaxResidual amounts available - SKU: 82023Radial column drill RSBM 5/6060 mm M 46 MK 5 25 - 2000 rpm 16 315 mm 16 0.04 - 3.2 mm/rev Show more
Specifications
drilling capacity in steel 60 mm thread cutting performance M 46 mandrel holding fixture (screw mandrel) MK 5 speed range 25 - 2000 rpm speed gradually 16 quill stroke 315 mm quill feed levels 16 quill feed 0.04 - 3.2 mm/rev t-slot width (Table/base) 22/28 mm drill head lift 580 mm mandrel radius 350 - 1600 mm drill head revolving ± 180 ° quill distance socket 1220 mm quill distance table min./max. 0 - 720 mm drilling table surface 630x500 mm drilling table height 500 mm motor power 4000 W lifting spindle engine 1500 W voltage 400/50 V/Hz coolant pump 90 W cooling pump performance 25 l/min cubature 630x500x720 mm length x width 2500 x 1070 mm height (total) 2840 mm Weight 3500 kg € 24.468,00Special price because of Metalworking action folder (until 31 March 2025)€ 24.468,00 Incl. Tax€ 20.390,00 Excl. TaxNormal-Price
Incl. Tax: € 36.228,00 -32%Residual amounts available
We stand for quality, reliability and stability - values that are in demand today more than ever.
FOCUSED
Powered by Quality
In the race for innovation, it sometimes happens that one loses sight of what and for whom one is looking for new solutions. The end result is the realisation that product development in itself is not a recipe for success.
It is much more important to keep your ear close to the needs and wishes of the customer. Only in this way can new developments and special solutions be created that really bring new advantages.
ELMAG works and develops based on this principle: always exactly according to the customer's wishes - and still with a wide standard range for trade, industry and crafts.
Only those who are prepared to go one step further reach the top. For this reason, the 2- or 3-year warranty and the 15-year spare parts guarantee are a matter of course at ELMAG.
MAIN PRINCIPLE
Powered by People
A large part of the ELMAG team has already completed their apprenticeship. This creates an invaluable advantage both for building up
expertise as well as for continuity in customer care. Only over the years can genuine trust and intensive partnership develop.
The human and professional appreciation of all employees is lived at ELMAG on a daily basis - and consistently. Respectful cooperation ensures a collegial, positive working atmosphere and more motivation at the workplace - for everyone. This is also felt by the customers.
POWERED BY QUALITY - POWERED BY PEOPLE. This guiding principle is a top priority for the entire ELMAG team.