Metal cutting machine TV 350
- Swivel-mounted machine head, +/- 45°
- Ball-bearing-mounted drive shaft
- Operating tool
- Ergonomic Control Lever
- Material Guide Bar
- Dry-cutting technique
round tube cutting range at 0°: Max. 120 mm
Downloads
Advantages
- Swivel-mounted machine head, +/- 45°
- Ball-bearing-mounted drive shaft
- Operating tool
- Ergonomic Control Lever
- Material Guide Bar
- Dry-cutting technique
Specifications
| round tube cutting range at 0° | Max. 120 mm |
| round tube cutting range at 45° right winged mitre | Max. 105 mm |
| square tube cutting range at 0° | Max. 108 mm |
| square tube cutting range at 45° right winged mitre | Max. 95 mm |
| rectangle tube cutting range at 0° | Max. 140x90 mm |
| rectangle tube cutting range at 45° right winged mitre | Max. 100x90 mm |
| separating region max. | 140 x 90 mm |
| cut-off wheels outside diameter | 350 mm |
| cut-off wheels inside diameter | 25.4 mm |
| vise span max. | 190 mm |
| separation angle | 45-0-45 ° |
| rotational speed | 4300 rpm |
| motor power | 5500 W |
| voltage | 400/50-60 V/Hz |
| Length | 830 mm |
| Width | 1025 mm |
| Height | 900 mm |
| Weight | 145 kg |
Downloads
Sheet steel base for TV 350
Cutting-off wheel 350x4.0x25.4mm for TV 350
Material stand model CUG Support height 58-97 cm (max. 200 kg) Roll
width/diameter 350/52 mm
BOMAR roller conveyor M330 Basic version
Length: 2,000 mm
Castors: Ø 60 mm
Castors: 7 pieces
Feet: 2 pieces
Load capacity: 150 kg/m.
Height: 730-1,130mm
BOMAR roller conveyor M330 Basic version
Length: 3,000 mm
Castors: Ø 60 mm
Castors: 11 pieces
Feet: 2 pieces
Load capacity: 150 kg/m.
Height: 730-1,130mm
BOMAR manual material stop MA-2 with measuring tape 2,000mm
BOMAR manual material stop MA-3 with measuring tape 3,000mm
Coolant concentrate in 5 lt container
Transmission oil 1 l 85W90
Art. no. 78376
Incl. Tax: € 828,00 -5%
Incl. Tax: € 384,00 -14%
Shipping duration display on product detail page:
This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.
