Gear drill and milling machine GBFM 50 GAL including 3-axis position display
Ready for operation: including oil filling, preservative removed (degreased), completely assembled and test run carried out
€ 30.606,00
€ 30.606,00
Incl. Tax
€ 25.505,00
Excl. Tax
In stock
SKU
- X/Y-automatic / rapid traverse, Z-height adjustment
- Milling capacity Ø 125 / 40 mm
- Cubature 1.220 x 360 x 600 mm
- Spindle projection 370 mm
- Table travel 620 x 370 mm
- Tilting milling head ± 45°
- Milling head drive Height adjustment
- Drive motor 2,400 W, 400 V
- 16 speeds 94 - 2,256 rpm
- Right and left rotation
- Tapping mode
- Sleeve feed 0,1/0,15/0,3 mm/U
- Precision microfeed
- Milling spindle with precision bearing
- Tightening spindle for high safety
- Drilling depth scale and stop
- Smooth-running, precise cross table
- Cross table X- and Y-axis with 8 feed stages and rapid traverse
- Centralized lubrication
- Coolant system with return flow
- LED milling table lighting
- With digital position display
Not available at the moment or only on request!
Article Number: 82155
|
EAN: 9004853821554
drilling capacity in steel: 50 mm
Downloads
- X/Y-automatic / rapid traverse, Z-height adjustment
- Milling capacity Ø 125 / 40 mm
- Cubature 1.220 x 360 x 600 mm
- Spindle projection 370 mm
- Table travel 620 x 370 mm
- Tilting milling head ± 45°
- Milling head drive Height adjustment
- Drive motor 2,400 W, 400 V
- 16 speeds 94 - 2,256 rpm
- Right and left rotation
- Tapping mode
- Sleeve feed 0,1/0,15/0,3 mm/U
- Precision microfeed
- Milling spindle with precision bearing
- Tightening spindle for high safety
- Drilling depth scale and stop
- Smooth-running, precise cross table
- Cross table X- and Y-axis with 8 feed stages and rapid traverse
- Centralized lubrication
- Coolant system with return flow
- LED milling table lighting
- With digital position display
Advantages
- X/Y-automatic / rapid traverse, Z-height adjustment
- Milling capacity Ø 125 / 40 mm
- Cubature 1.220 x 360 x 600 mm
- Spindle projection 370 mm
- Table travel 620 x 370 mm
- Tilting milling head ± 45°
- Milling head drive Height adjustment
- Drive motor 2,400 W, 400 V
- 16 speeds 94 - 2,256 rpm
- Right and left rotation
- Tapping mode
- Sleeve feed 0,1/0,15/0,3 mm/U
- Precision microfeed
- Milling spindle with precision bearing
- Tightening spindle for high safety
- Drilling depth scale and stop
- Smooth-running, precise cross table
- Cross table X- and Y-axis with 8 feed stages and rapid traverse
- Centralized lubrication
- Coolant system with return flow
- LED milling table lighting
- With digital position display
More Information
| EAN-Number | 9004853821554 |
|---|---|
| No parcel service shipping | Yes |
| Article Group "Special Programme" | Yes |
| Product-Highlights |
|
| Substitute product | 82136 |
| Files | |
| ELMAG - Technical details | elmag_merk_171 | 50 | mm \ elmag_merk_217 | M30 | \ elmag_merk_212 | 125 | mm \ elmag_merk_213 | 40 | mm \ AAC993f001 | ISO 40 | \ elmag_merk_224 | 94 - 1120 | rpm \ elmag_merk_225 | 189 - 2,256 | rpm \ elmag_merk_25 | 16 | \ elmag_merk_94 | 180 | mm \ elmag_merk_236 | 3 / 14 x 95 | mm \ elmag_merk_214 | 510 | mm \ elmag_merk_98 | 370 | mm \ elmag_merk_215 | ± 45 | ° \ elmag_merk_101 | 90 - 600 | mm \ elmag_merk_221 | 1220x360 | mm \ elmag_merk_169 | 0.1 / 0.15 / 0.3 | mm/rev \ elmag_merk_111 | 3 | \ elmag_merk_222 | 620 x 370 | mm \ elmag_merk_362 | 24 - 720 | mm/min \ elmag_merk_238 | 8 | \ elmag_merk_241 | Yes | \ AAC653f001 | 2400 | W \ elmag_merk_240 | 370 | W \ elmag_merk_16 | 40 | W \ elmag_merk_15 | 400/50 | V/Hz \ elmag_merk_104 | 1220x360x600 | mm \ elmag_merk_218 | 1770 x 1800 | mm \ AAA031f001 | 2320 | mm \ AAA003f001 | 1700 | kg \ |
| Low Stock Amount | 1 |
| ELMAG goods group | 6 |
| Filter-Category | Maschinen/Geräte |
| 3 years warranty possible | light |
| Planned stock decrease | 0 |
| Planned stock increase | 0 |
| HNP/SP-Price | € 20.400,00 |
| HNP/SP-Info Tier | 1,20400.00 |
| HNP/SP-Preis 39 | € 21.625,00 |
| HNP/SP-Sonderpreis 39 | € 0,00 |
| Staffel HNP/SP-Info 39 | 1,21625.00 |
| Previous URL Key | gear-drill-and-milling-machine-gbfm-50-gal-82155 |
Specifications
| drilling capacity in steel | 50 mm |
| thread cutting performance | M30 |
| face mills milling capacity | 125 mm |
| end mills milling capacity | 40 mm |
| mandrel holding fixture (screw mandrel) | ISO 40 |
| rotational speed 1 | 94 - 1120 rpm |
| rotational speed 2 | 189 - 2,256 rpm |
| speed gradually | 16 |
| quill stroke | 180 mm |
| T-slot / width x distance | 3 / 14 x 95 mm |
| milling head stroke | 510 mm |
| mandrel radius | 370 mm |
| milling head swivel range | ± 45 ° |
| quill distance table min./max. | 90 - 600 mm |
| quill feed | 0.1 / 0.15 / 0.3 mm/rev |
| router table surface | 1220x360 mm |
| table length X x Y | 620 x 370 mm |
| quill feed levels | 3 |
| feeds X/Y | 24 - 720 mm/min |
| feed steps X/Y | 8 |
| rapid traverse X/Y | Yes |
| motor power | 2400 W |
| feed drive X/Y | 370 W |
| coolant pump | 40 W |
| voltage | 400/50 V/Hz |
| cubature | 1220x360x600 mm |
| length x width | 1770 x 1800 mm |
| Height | 2320 mm |
| Weight | 1700 kg |
Substitute
This article could be an alternative for you:
Downloads
- Siemens 828D Control + Shop Mill
- Main spindle 8000 rpm (10,000) TW
- 24-way OKADA tool changer TW
- Electric handwheel for 3 axes
- Screw chip conveyor
€ 86.508,00
€ 86.508,00
Incl. Tax
€ 72.090,00
Excl. Tax
Not available at the moment or only on request!
Ready for operation: including oil filling, preservative removed (degreased), completely assembled and test run carried out
€ 67.344,00
€ 67.344,00
Incl. Tax
€ 56.120,00
Excl. Tax
available again from week no. 23/2024
- Siemens 828D Control + Shop Mill
- Main spindle 8000 rpm (10,000) TW
-16-way tool changer TW
- Electric handwheel for 3 axes
- Screw chip conveyor
€ 72.402,00
€ 72.402,00
Incl. Tax
€ 60.335,00
Excl. Tax
Not available at the moment or only on request!
Ready for operation: including oil filling, preservative removed (degreased), completely assembled and test run carried out
€ 61.860,00
€ 61.860,00
Incl. Tax
€ 51.550,00
Excl. Tax
Not available at the moment or only on request!
Ready for operation: including oil filling, preservative removed (degreased), completely assembled and test run carried out
€ 56.700,00
€ 56.700,00
Incl. Tax
€ 47.250,00
Excl. Tax
available again from week no. 23/2024
€ 25.944,00
€ 25.944,00
Incl. Tax
€ 21.620,00
Excl. Tax
Residual amounts available
Ready for operation: including oil filling, preservative removed (degreased), completely assembled and test run carried out
€ 34.638,00
€ 34.638,00
Incl. Tax
€ 28.865,00
Excl. Tax
Residual amounts available
including 3-axis position display
Ready for operation: including oil filling, preservative removed (degreased), completely assembled and test run carried out
€ 114.156,00
€ 114.156,00
Incl. Tax
€ 95.130,00
Excl. Tax
available again from week no. 26/2024
Ready for operation: including oil filling, preservative removed (degreased), completely assembled and test run carried out
€ 38.928,00
€ 38.928,00
Incl. Tax
€ 32.440,00
Excl. Tax
available again from week no. 23/2024
- incl. 24-fold tool changer
-Air and water cooling
€ 91.452,00
€ 91.452,00
Incl. Tax
€ 76.210,00
Excl. Tax
Not available at the moment or only on request!
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
€ 45.720,00
€ 45.720,00
Incl. Tax
€ 38.100,00
Excl. Tax
Residual amounts available
This article includes the ELMAG START-UP SERVICE.
Further information can be found HERE or at elmag.at/startupservice
Shipping duration display on product detail page:
This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.
