Automatic head welding shield - panoramaxx 2.5 -TC (1010.000) “Optrel®”, DIN 2.5/5-12, incl. 1 pc. outer glass overlay, storage bag, micro USB charging cable, warranty card & user manual
Incl. Tax: € 722,40 -15%
- Thanks to the patented panoramic field of view with nose cut-out, the field of view is over 600% larger without increasing the weight or shape of the welding helmet
- A practical additional benefit here is that, due to the clear separation from the mouth area, you do not breathe onto the display and thus prevent the anti-glare cassette from starting up
- For comparison: a conventional anti-glare display without a nose cut-out would have to have a size of 180x120 mm to achieve the same field of view as the panoramaxx series
- The IsoFit headband sets new standards in the area of feather-light, fatigue-free comfort
- Patented ShadeTronic - a highly developed light sensor measures the intensity of the welding arc at all times and continuously and fully automatically regulates the glare protection in the active state from protection level 4-12
- This brings particular advantages in the hot start and crater filling function at the beginning or end of the welding process and with welding current intensities that change frequently
- The automatic protection level adjustment with individual calibration +/- 2 protection levels can be adapted to the user’s eyesight
- Using patented FadeTronic, opening of the anti-glare display after welding can be continuously adjusted. Especially in high-amp applications, there is protection against the unpleasant afterglow
- Thanks to the smooth opening of the display, which is adapted to the eyes, eye fatigue is significantly reduced
- 5-point Detection is an intelligent sensor control system with 5 sensors. Thanks to highly developed software and clever positioning of 4 sensors at the corners and 1 sensor at the top centre, the glare protection is switched on and off perfectly, even in the most difficult lighting conditions and in awkward positions, and there is continuous dark level adjustment (Shadetronic) during welding.
- The unique, environmentally friendly optrel re-charging energy concept ensures that the welding helmet always has enough energy. Thanks to state-of-the-art solar technology, a rechargeable lithium-polymer battery is charged either by the welding light or the ambient light. In addition, the battery can also be charged directly with any USB charger via a micro-USB interface (battery life approx. 300-500 charging cycles). Irritating battery changes are eliminated and the environment is protected.
- Grinding mode can be activated by pressing a button on the outside of the welding helmet
Suitable for welding overhead and in awkward positions - Also available as a fresh air version, incl. fan respiratory protection e3000X with the highest particle filter level TH3 for reliable protection against smoke, gas and dust
- TRUE COLOR anti-glare cassette for true colour perception during welding
- New energy concept ensures automatic charging of the battery by means of the arc, ambient light or micro-USB cable. In addition, the anti-glare filter is switched off when less than 1 LUX of light shines on the anti-glare cassette for about 10 minutes.
- Short switching time of only 0.09 ms
- Adjustable delay/brightening delay for optimal protection of the eyes from the afterglow of the weld seam
- Adjustable sensitivity with “Super High” & “Tack” ranges for optimal response
: TRUE COLOR
Downloads
- Thanks to the patented panoramic field of view with nose cut-out, the field of view is over 600% larger without increasing the weight or shape of the welding helmet
- A practical additional benefit here is that, due to the clear separation from the mouth area, you do not breathe onto the display and thus prevent the anti-glare cassette from starting up
- For comparison: a conventional anti-glare display without a nose cut-out would have to have a size of 180x120 mm to achieve the same field of view as the panoramaxx series
- The IsoFit headband sets new standards in the area of feather-light, fatigue-free comfort
- Patented ShadeTronic - a highly developed light sensor measures the intensity of the welding arc at all times and continuously and fully automatically regulates the glare protection in the active state from protection level 4-12
- This brings particular advantages in the hot start and crater filling function at the beginning or end of the welding process and with welding current intensities that change frequently
- The automatic protection level adjustment with individual calibration +/- 2 protection levels can be adapted to the user’s eyesight
- Using patented FadeTronic, opening of the anti-glare display after welding can be continuously adjusted. Especially in high-amp applications, there is protection against the unpleasant afterglow
- Thanks to the smooth opening of the display, which is adapted to the eyes, eye fatigue is significantly reduced
- 5-point Detection is an intelligent sensor control system with 5 sensors. Thanks to highly developed software and clever positioning of 4 sensors at the corners and 1 sensor at the top centre, the glare protection is switched on and off perfectly, even in the most difficult lighting conditions and in awkward positions, and there is continuous dark level adjustment (Shadetronic) during welding.
- The unique, environmentally friendly optrel re-charging energy concept ensures that the welding helmet always has enough energy. Thanks to state-of-the-art solar technology, a rechargeable lithium-polymer battery is charged either by the welding light or the ambient light. In addition, the battery can also be charged directly with any USB charger via a micro-USB interface (battery life approx. 300-500 charging cycles). Irritating battery changes are eliminated and the environment is protected.
- Grinding mode can be activated by pressing a button on the outside of the welding helmet
Suitable for welding overhead and in awkward positions - Also available as a fresh air version, incl. fan respiratory protection e3000X with the highest particle filter level TH3 for reliable protection against smoke, gas and dust
- TRUE COLOR anti-glare cassette for true colour perception during welding
- New energy concept ensures automatic charging of the battery by means of the arc, ambient light or micro-USB cable. In addition, the anti-glare filter is switched off when less than 1 LUX of light shines on the anti-glare cassette for about 10 minutes.
- Short switching time of only 0.09 ms
- Adjustable delay/brightening delay for optimal protection of the eyes from the afterglow of the weld seam
- Adjustable sensitivity with “Super High” & “Tack” ranges for optimal response
Advantages
- Thanks to the patented panoramic field of view with nose cut-out, the field of view is over 600% larger without increasing the weight or shape of the welding helmet
- A practical additional benefit here is that, due to the clear separation from the mouth area, you do not breathe onto the display and thus prevent the anti-glare cassette from starting up
- For comparison: a conventional anti-glare display without a nose cut-out would have to have a size of 180x120 mm to achieve the same field of view as the panoramaxx series
- The IsoFit headband sets new standards in the area of feather-light, fatigue-free comfort
- Patented ShadeTronic - a highly developed light sensor measures the intensity of the welding arc at all times and continuously and fully automatically regulates the glare protection in the active state from protection level 4-12
- This brings particular advantages in the hot start and crater filling function at the beginning or end of the welding process and with welding current intensities that change frequently
- The automatic protection level adjustment with individual calibration +/- 2 protection levels can be adapted to the user’s eyesight
- Using patented FadeTronic, opening of the anti-glare display after welding can be continuously adjusted. Especially in high-amp applications, there is protection against the unpleasant afterglow
- Thanks to the smooth opening of the display, which is adapted to the eyes, eye fatigue is significantly reduced
- 5-point Detection is an intelligent sensor control system with 5 sensors. Thanks to highly developed software and clever positioning of 4 sensors at the corners and 1 sensor at the top centre, the glare protection is switched on and off perfectly, even in the most difficult lighting conditions and in awkward positions, and there is continuous dark level adjustment (Shadetronic) during welding.
- The unique, environmentally friendly optrel re-charging energy concept ensures that the welding helmet always has enough energy. Thanks to state-of-the-art solar technology, a rechargeable lithium-polymer battery is charged either by the welding light or the ambient light. In addition, the battery can also be charged directly with any USB charger via a micro-USB interface (battery life approx. 300-500 charging cycles). Irritating battery changes are eliminated and the environment is protected.
- Grinding mode can be activated by pressing a button on the outside of the welding helmet
Suitable for welding overhead and in awkward positions - Also available as a fresh air version, incl. fan respiratory protection e3000X with the highest particle filter level TH3 for reliable protection against smoke, gas and dust
- TRUE COLOR anti-glare cassette for true colour perception during welding
- New energy concept ensures automatic charging of the battery by means of the arc, ambient light or micro-USB cable. In addition, the anti-glare filter is switched off when less than 1 LUX of light shines on the anti-glare cassette for about 10 minutes.
- Short switching time of only 0.09 ms
- Adjustable delay/brightening delay for optimal protection of the eyes from the afterglow of the weld seam
- Adjustable sensitivity with “Super High” & “Tack” ranges for optimal response
More Information
EAN-Number | 9004853572159 |
---|---|
No parcel service shipping | No |
Article Group "Special Programme" | Yes |
Product-Highlights |
|
Substitute product | 57214 |
Files | |
ELMAG - Technical details | elmag_merk_2092 | TRUE COLOR | \ elmag_merk_117 | 100 x 50 | mm \ elmag_merk_2095 | >600 | % \ elmag_merk_980 | 1/1/1/2 | \ elmag_merk_118 | 5 | \ elmag_merk_119 | Yes | \ elmag_merk_120 | Solar cells | \ elmag_merk_2097 | Yes | \ elamg_merk_2098 | Yes | \ elmag_merk_2093 | Yes | \ elmag_merk_124 | Yes | \ elmag_merk_2094 | Yes | \ elmag_merk_126 | auto or stepless | \ elmag_merk_127 | continuously variable | \ elmag_merk_132 | DIN 12 | \ elmag_merk_2098 | 0,0001 | s \ elmag_merk_129 | 0,1~ 2,0 | s \ elmag_merk_130 | DIN 2.5 | \ elmag_merk_131 | DIN 7 | \ elmag_merk_2099 | DIN 5 | \ elmag_merk_2100 | DIN 12 | \ elmag_merk_133 | DIN 16 | \ elmag_merk_134 | DIN 16 | \ AAA003f001 | 0.575 | kg \ |
Low Stock Amount | 1 |
ELMAG goods group | 6 |
Filter-Category | Maschinen/Geräte |
3 years warranty possible | full |
Planned stock decrease | 0 |
Planned stock increase | 0 |
Passendes Zubehör | 57237|57230|57212|57233|57234|57211|57231|57232|57235|57236|10084|10085|57209 |
HNP/SP-Price | € 482,00 |
HNP/SP-Special price | € 407,00 |
Special Price Info | Messe Highlights Schweissen & Intertool 2024 |
Special Price Info HNP/SP | Messe Highlights Schweissen & Intertool 2024 |
HNP/SP-Info Tier | 1,482.00 |
Staffel HNP/SP-Sonderpreis-Info | 1,407.00 |
HNP/SP-Preis 39 | € 511,00 |
HNP/SP-Sonderpreis 39 | € 432,00 |
Staffel HNP/SP-Info 39 | 1,511.00 |
Staffel HNP/SP-Sonderpreis-Info 39 | 1,432.00 |
Previous URL Key | automatic-head-welding-shield-panoramaxx-2-5-tc-1010-000-57215 |
Specifications
TRUE COLOR | |
sight size w x h | 100 x 50 mm |
>600 % | |
classification EN 379 | 1/1/1/2 |
light sensors | 5 |
solar technology | Yes |
power supply | Solar cells |
Yes | |
Yes | |
Yes | |
lighting delay short/medium/long | Yes |
Yes | |
protection levels setting DIN EN 4/9-13 | auto or stepless |
protection grade setting sensitivity | continuously variable |
protection level darkened max. | DIN 12 |
0,0001 s | |
light up time short/medium/long | 0,1~ 2,0 s |
protection level bright | DIN 2.5 |
protection level darkened min. | DIN 7 |
DIN 5 | |
DIN 12 | |
ultra violette protection UV permanent | DIN 16 |
infrared protection IR permanent | DIN 16 |
Weight | 0.575 kg |
Substitute
This article could be an alternative for you:
Downloads
IsoFit® headgear replacement Tricot pad for “Optrel®” panoramaxx (57215/1010.000, 57214/4550.550, 57217/1010.200, 57216/4550.580), model no. 5004.290 (5 pc./pack, consisting of 4 parts each)
Vorsatzscheibe gebogen / außen zu 'Optrel®' panoramaxx (57215/1010.000, 57214/4550.550, 57217/1010.200, 57216/4550.580), type no. 5000.270 (5-pc. pack)
Leather chest protector / long - black suitable for all “Optrel®” e600/p500/p550 (57200/1007.011)/p330/b600/liteflip/vegaview 2.5 (57385/1006.600)/panoramaxx (57215/1010.000, 57217/1010.200)/helmets (not suitable for helmets with fresh air connection) model no. 4028.029
Enlargement lens / dioptre lens +1.0 for “Optrel®” panoramaxx (57215/1010.000, 57214/4550.550, 57217/1010.200, 57216/4550.580), model no. 5000.150
Enlargement lens / dioptre lens +1.5 for “Optrel®” panoramaxx (57215/1010.000, 57214/4550.550, 57217/1010.200, 57216/4550.580), model no. 5000.151
Leather chest protector / short - black suitable for all “Optrel®” e600/p500/p550 (57200/1007.011)/p330/b600/liteflip (57296/1006.700)/vegaview 2.5 (57385/1006.600)/panoramaxx (57215/1010.000 57217/1010.200)/helmets (not suitable for helmets with fresh air connection) model no. 4028.015
Vorsatzscheibe innen zu 'Optrel®' panoramaxx (57215/1010.000, 57214/4550.550, 57217/1010.200, 57216/4550.580), type no. 5000.010 (5-pc. pack)
Nose protection pad for “Optrel®” panoramaxx (57215/1010.000, 57214/4550.550, 57217/1010.200, 57216/4550.580), model no. 5003.600 (2-pc. pack)
Enlargement lens / dioptre lens +2.0 for “Optrel®” panoramaxx (57215/1010.000, 57214/4550.550, 57217/1010.200, 57216/4550.580), model no. 5000.152
Enlargement lens / dioptre lens +2.5 for “Optrel®” panoramaxx (57215/1010.000, 57214/4550.550, 57217/1010.200, 57216/4550.580), model no. 5000.153
Universal industrial helmet adapter with spring suitable for all “Optrel®” helmets with NO fresh air adapter e684/liteflip/vegaview 2.5 (57385/1006.600)/e680/e670/e650/E640/osc./p550(57200/1007.000)/p530/p330/b630/clearmaxx/panoramaxx (57215/1010.000, 57217/1010.200) and the fresh air versions of clearmaxx & panoramaxx (57214/4550.550, 57216/4550.580), model no. 5011.180
Industrial helmet KONG - white - discontinued item suitable for all “Optrel®” helmets with NO fresh air adapter e684/liteflip/vegaview 2.5 (57385/1006.600)/e680/e670/e650/E640/osc./p550(57200/1007.000)/p530/p330/b630/clearmaxx/panoramaxx (57215/1010.000, 57217/1010.200) and the fresh air versions of clearmaxx & panoramaxx (57214/4550.550, 57216/4550.580), model no. 5011.131
Leather head & neck protector / Standard - black suitable for all “Optrel®” e600/p500/p550 (57200/1007.011)/p330/b600/liteflip (57296/1006.700)/vegaview 2.5 (57385/1006.600)/panoramaxx (57215/1010.000, 57217/1010.200) not suitable for helmets with fresh air connection) model no. 4028.016
incl. 3 pcs. outer glass overlays
& 1 pc. inner glass overlay, and
Colour cardboard packaging
Incl. Tax: € 154,80 -23%
including 3 pcs. outside glass overlays
& 1 pc. inside glass overlay, and
coloured cardboard packaging
Incl. Tax: € 130,80 -33%
including 3 pcs. outside glass overlays &
1 pc. inside glass overlay, and
coloured cardboard packaging
Incl. Tax: € 130,80 -33%
incl. 3 pcs. exterior cover glass
& 1 pc. inner glass overlay, and
colour cardboard packaging
Incl. Tax: € 79,80 -38%
Incl. Tax: € 2.263,20 -16%
Incl. Tax: € 2.436,00 -16%
1 odour filter frame
1 active carbon odour filter
Shipping duration display on product detail page:
This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.