0 Products
TS kit up to 173 kVA = 200-250A for automatic voltage switching in the event of mains failure, control cabinet 1400x600 mm, ABB OTM 250A motorised load transfer switch 4-pole, ABB dual power supply, power connections directly at the load transfer switch. (Only for units with unit controller from DSE 4520 or higher)
€ 7.410,00
€ 7.410,00
Incl. Tax
€ 6.175,00
Excl. Tax
Not available at the moment or only on request!
ATS Panel DSE 335 up to 173 kVA = 200-250A, auto power failure detection with auto. voltage switching in the event of mains failure, control cabinet for floor installation, includes DC power supply DSE 160 (for devices with unit control system with start-stop via potential-free contact e.g. DSE 3110,7310,7410, ...)
€ 11.160,00
€ 11.160,00
Incl. Tax
€ 9.300,00
Excl. Tax
Not available at the moment or only on request!
Automatic load transfer switch 63 A - 4-pin Type ABB OTM with integrated mains and generator monitoring as well as remote start output for generators, for cap rail assembly, auxiliary contacts as well as busbar available on the mains side as an option
€ 1.572,00
€ 1.572,00
Incl. Tax
€ 1.310,00
Excl. Tax
In stock, immediately available
Road chassis 1300kg for generator - 1-axis special chassis
- up to 1300 kg load max. Total weight
- Rubber suspension axle maintenance-free
- Run-up brakes
- V-drawbar
- Welded all-steel design
- Completely hot-dip galvanised
- 1 front support wheel
- Lighting meets Highway Code
- 7 or 13 pin plug
- Incl. 2 rear slide supports
- Incl. assembly of the generator
- Typed
- up to 1300 kg load max. Total weight
- Rubber suspension axle maintenance-free
- Run-up brakes
- V-drawbar
- Welded all-steel design
- Completely hot-dip galvanised
- 1 front support wheel
- Lighting meets Highway Code
- 7 or 13 pin plug
- Incl. 2 rear slide supports
- Incl. assembly of the generator
- Typed
€ 6.492,00
€ 6.492,00
Incl. Tax
€ 5.410,00
Excl. Tax
Not available at the moment or only on request!
ATS Panel DSE 335 to 436 kVA = 400-630A, auto power failure detection with auto. voltage switching in the event of mains failure, control cabinet for floor installation, includes DC power supply DSE 160 (for devices with unit control system with start-stop via potential-free contact e.g. DSE 3110,7310,7410, ...)
€ 0,00
Not available at the moment or only on request!
ATS Panel DSE 335 up to 87 kVA = 125A, auto power failure detection with auto. voltage switching in the event of mains failure, control cabinet for wall mounting, includes DC power supply DSE 160 (for devices with unit control system with start-stop via potential-free contact e.g. DSE 3110,7310,7410, ...)
€ 7.344,00
€ 7.344,00
Incl. Tax
€ 6.120,00
Excl. Tax
Not available at the moment or only on request!
Automatic load transfer switch 125 A - 4-pin Typ ABB OTM mit integrierter Netz- und Generatorüberwachung sowie Fernstartausgang für Stromerzeuger, für Hutschienenmontage, Hilfskontakte sowie Sammelschiene Abgangsseitig optional erhältlich
€ 1.884,00
€ 1.884,00
Incl. Tax
€ 1.570,00
Excl. Tax
In stock, immediately available
ATS Panel DSE 335 up to 111 kVA = 120-160A, auto power failure detection with auto voltage change in case of power failure, control cabinet for wall mounting, includes DC power supply DSE 160 (for devices with aggregate control with start-stop via potential-free contact e.g. DSE 3110, 7310, 7410, ...)
€ 8.808,00
€ 8.808,00
Incl. Tax
€ 7.340,00
Excl. Tax
Not available at the moment or only on request!
Road chassis 1500kg for generator - 1-axis special chassis
- up to 1500 kg max. total weight Total weight
- Rubber suspension axle maintenance-free
- Run-up brakes
- V-drawbar
- Welded all-steel design
- Completely hot-dip galvanised
- 1 front support wheel
- Lighting meets Highway Code
- 7 or 13 pin plug
- Incl. 2 rear slide supports
- Incl. assembly of the generator
- Typed
- up to 1500 kg max. total weight Total weight
- Rubber suspension axle maintenance-free
- Run-up brakes
- V-drawbar
- Welded all-steel design
- Completely hot-dip galvanised
- 1 front support wheel
- Lighting meets Highway Code
- 7 or 13 pin plug
- Incl. 2 rear slide supports
- Incl. assembly of the generator
- Typed
€ 6.882,00
€ 6.882,00
Incl. Tax
€ 5.735,00
Excl. Tax
Not available at the moment or only on request!
Tandem road chassis 3000kg for generator - Tandem axis special chassis
- up to 3000 kg max. permitted total weight
- Maintenance-free rubber spring axes
- Overrun brakes
- V-drawbar
- rigid
- Welded full steel design C-profile
- Completely hot-dip galvanised
- 1 front support wheel KNOTT 250kg load-bearing capacity
- Lighting meets German Highway Code
- Multi-chamber light bulb technology
- Front position lamps, registration plate lamps and other position lamps with rubber boom in LED
- 7 or 13-pin plug
- 4 lifting eyes fitted on the corners
- Light bar width the same as wheelhouse width
- Incl. assembly of the generator
- typed
- up to 3000 kg max. permitted total weight
- Maintenance-free rubber spring axes
- Overrun brakes
- V-drawbar
- rigid
- Welded full steel design C-profile
- Completely hot-dip galvanised
- 1 front support wheel KNOTT 250kg load-bearing capacity
- Lighting meets German Highway Code
- Multi-chamber light bulb technology
- Front position lamps, registration plate lamps and other position lamps with rubber boom in LED
- 7 or 13-pin plug
- 4 lifting eyes fitted on the corners
- Light bar width the same as wheelhouse width
- Incl. assembly of the generator
- typed
€ 11.754,00
€ 11.754,00
Incl. Tax
€ 9.795,00
Excl. Tax
Not available at the moment or only on request!
Tandem road chassis 2700kg for generators - Tandem axis special chassis
- up to 2700 kg max. permitted total weight
- Maintenance-free rubber spring axes
- Overrun brakes
- V-drawbar - rigid
- Welded full steel design C-profile
- Completely hot-dip galvanised
- 1 front support wheel KNOTT 250kg load-bearing capacity
- Lighting meets German Highway Code
- Multi-chamber light bulb technology
- Front position lamps, registration plate lamps and other position lamps with rubber boom in LED
- 7 or 13-pin plug
- 4 lifting eyes fitted on the corners
- Light bar width the same as wheelhouse width
- Incl. assembly of the generator
- typed
- up to 2700 kg max. permitted total weight
- Maintenance-free rubber spring axes
- Overrun brakes
- V-drawbar - rigid
- Welded full steel design C-profile
- Completely hot-dip galvanised
- 1 front support wheel KNOTT 250kg load-bearing capacity
- Lighting meets German Highway Code
- Multi-chamber light bulb technology
- Front position lamps, registration plate lamps and other position lamps with rubber boom in LED
- 7 or 13-pin plug
- 4 lifting eyes fitted on the corners
- Light bar width the same as wheelhouse width
- Incl. assembly of the generator
- typed
€ 11.094,00
€ 11.094,00
Incl. Tax
€ 9.245,00
Excl. Tax
Not available at the moment or only on request!
Automatic refuelling system for SED/SEDSS devices with Kubota diesel engine from large external tank installed in standard tank of the power generator
€ 2.280,00
€ 2.280,00
Incl. Tax
€ 1.900,00
Excl. Tax
Not available at the moment or only on request!
Motorised load transfer switch 400A - 4-pin Type ABB OTM400E4CM230C for automatic switching of mains-0-emergency power by control via external control (e.g. generator control, PLC, ...), motor drive must be supplied externally (optional dual power supply ODPSE230C)
€ 3.906,00
€ 3.906,00
Incl. Tax
€ 3.255,00
Excl. Tax
In stock, immediately available
TS kit up to 87 kVA = 125A for automatic voltage switching in the event of mains failure, control cabinet 600x500x300 mm, ABB OTM 125 A motorised load transfer switch 4-pole, ABB dual power supply, power connections directly at the load transfer switch. (Only for units with unit controller from DSE 4520 or higher)
€ 3.114,00
€ 3.114,00
Incl. Tax
€ 2.595,00
Excl. Tax
Not available at the moment or only on request!
Road chassis 1800kg for generator - 1-axis special chassis
- up to 1800 kg max. total weight Total weight
- Rubber suspension axle maintenance-free
- Run-up brakes
- V-drawbar
- Welded all-steel design
- Completely hot-dip galvanised
- 1 front support wheel
- Lighting meets Highway Code
- 7 or 13 pin plug
- Incl. 2 rear slide supports
- Incl. assembly of the generator
- Typed
- up to 1800 kg max. total weight Total weight
- Rubber suspension axle maintenance-free
- Run-up brakes
- V-drawbar
- Welded all-steel design
- Completely hot-dip galvanised
- 1 front support wheel
- Lighting meets Highway Code
- 7 or 13 pin plug
- Incl. 2 rear slide supports
- Incl. assembly of the generator
- Typed
€ 7.020,00
€ 7.020,00
Incl. Tax
€ 5.850,00
Excl. Tax
Not available at the moment or only on request!
Motorised load transfer switch 250 A - 4-pin Model ABB OTM250E4CM230C for automatic switching mains-0-emergency power with actuation via external control system (e.g. generator controller, PLC, ...), motor drive must have external supply (optional ODPSE230C dual power supply unit)
€ 3.210,00
€ 3.210,00
Incl. Tax
€ 2.675,00
Excl. Tax
In stock, immediately available
Height adjustable drawbar KHD 35 at extra cost - for tandem road chassis - maximum permitted overall weight of 3500 kg - With quick-action crank height adjustment - overrun brake - with ball coupling and interchangeable lorry towing eye
€ 5.802,00
€ 5.802,00
Incl. Tax
€ 4.835,00
Excl. Tax
In stock, immediately available
Automatic refuelling system for units from SEDSS 60WDE onwards from external large tank installed in standard tank of the power generator
€ 3.678,00
€ 3.678,00
Incl. Tax
€ 3.065,00
Excl. Tax
Not available at the moment or only on request!
TS kit up to 40 kVA = 63A for automatic voltage switching in the event of mains failure, control cabinet 600x500x300 mm, ABB OTM 63A motorised load transfer switch 4-pole, ABB dual power supply, power connections directly at the load transfer switch. (Only for units with unit controller from DSE 4520 or higher)
€ 2.760,00
€ 2.760,00
Incl. Tax
€ 2.300,00
Excl. Tax
Not available at the moment or only on request!
A-LTS panel up to 40 kVA = 63A for automatic voltage switching in the event of mains failure. With automatic load transfer switch A-LTS ABB OTM 63A 4-pin, in control cabinet for wall assembly. (for devices with unit control system with start-stop via potential-free contact e.g. DSE 3110, 4520, 7xxx ...)
€ 1.962,00
€ 1.962,00
Incl. Tax
€ 1.635,00
Excl. Tax
In stock, immediately available
2 swivel crank supports at additional cost - for road chassis 1300 to 3500 kg - Standard sliding supports not required
€ 608,40
€ 608,40
Incl. Tax
€ 507,00
Excl. Tax
In stock, immediately available
Refuelling set for ELMAG DIN generators consisting of: 20 litre canister, special tank lid with connections, connection cable
€ 256,80
€ 256,80
Incl. Tax
€ 214,00
Excl. Tax
In stock, immediately available
12 volt connection for external battery to Generator (Nato plug)
€ 420,00
€ 420,00
Incl. Tax
€ 350,00
Excl. Tax
Not available at the moment or only on request!
TS kit up to 277 kVA = 250-400A for automatic voltage changeover in case of mains failure, control cabinet 1400x600 mm, ABB OTM 400A motorised load transfer switch 4-pole, ABB dual power supply, power connections directly at the load transfer switch. (Only for units with unit controller from DSE 4520 or higher)
€ 8.496,00
€ 8.496,00
Incl. Tax
€ 7.080,00
Excl. Tax
Not available at the moment or only on request!
TS Kit up to 436 kVA = 400-630A for automatic voltage changeover in case of mains failure, control cabinet 2000x1000 mm, ABB OTM 630A motorised load transfer switch 4-pole, ABB dual power supply, power connections directly at the load transfer switch. (Only for units with unit controller from DSE 4520 or higher)
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
TS kit up to 692 kVA = 400-1250A for automatic voltage switching in the event of mains failure, control cabinet 2000x1000 mm, ABB OTM 1250 A motorised load transfer switch 4-pole, ABB dual power supply, power connections directly at the load transfer switch. (Only for units with unit controller from DSE 4520 or higher)
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Motorised load transfer switch 125A - 4-pin Type ABB OTM125F4CMA230V for automatic switching of mains-0-emergency power by external control system (e.g. generator control, PLC, ...), motor drive must be supplied externally (optional dual power supply ODPSE230C)
€ 1.752,00
€ 1.752,00
Incl. Tax
€ 1.460,00
Excl. Tax
Residual amounts available
Extension module DSE 2130 8 digital inputs (4x also analog configurable)
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Height adjustable drawbar KHD 27 at extra cost - for tandem road chassis
- maximum permitted overall weight of 2700 kg
- with quick-action crank height adjustment
- overrun brake
- with ball coupling and interchangeable lorry towing eye
- maximum permitted overall weight of 2700 kg
- with quick-action crank height adjustment
- overrun brake
- with ball coupling and interchangeable lorry towing eye
€ 5.034,00
€ 5.034,00
Incl. Tax
€ 4.195,00
Excl. Tax
Not available at the moment or only on request!
Pipe clamp 42mm for flex. Exhaust pipe (AD: 42mm/ID: 38mm)
€ 6,00
€ 6,00
Incl. Tax
€ 5,00
Excl. Tax
excluding shipping costs
In stock, immediately available
12 volt battery trickle charge connection for DIN generators (MagCode plugs)
€ 282,00
€ 282,00
Incl. Tax
€ 235,00
Excl. Tax
Not available at the moment or only on request!
Extension module DSE 2152 8 analogue outputs 0-10 V or 4-20 mA adjustable
(loose for cap rail assembly)
(loose for cap rail assembly)
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Flexible exhaust pipe 1.5m according to DIN 14572 for DIN generators (50x1500 mm)
€ 650,40
€ 650,40
Incl. Tax
€ 542,00
Excl. Tax
In stock, immediately available
Pipe clamp 38mm for flex. Exhaust pipe (ED: 38mm/ID: 35mm)
€ 6,00
€ 6,00
Incl. Tax
€ 5,00
Excl. Tax
excluding shipping costs
Not available at the moment or only on request!
Extension to Iso monitor for DIN generators Warning at level 1 / Voltage switch-off at level 2
€ 468,00
€ 468,00
Incl. Tax
€ 390,00
Excl. Tax
Not available at the moment or only on request!
Tandem road chassis 3500kg for generators - Tandem axis special chassis
- up to 3500 kg max. permitted total weight
- Maintenance-free rubber spring axes
- Overrun brakes
- V-drawbar
- rigid
- Welded full steel design C-profile
- Completely hot-dip galvanised
- 1 front support wheel KNOTT 250kg load-bearing capacity
- Lighting meets German Highway Code
- Multi-chamber light bulb technology
- Front position lamps, registration plate lamps and other position lamps with rubber boom in LED
- 7 or 13-pin plug
- 4 lifting eyes fitted on the corners
- Light bar width the same as wheelhouse width
- Incl. assembly of the generator
- typed
- up to 3500 kg max. permitted total weight
- Maintenance-free rubber spring axes
- Overrun brakes
- V-drawbar
- rigid
- Welded full steel design C-profile
- Completely hot-dip galvanised
- 1 front support wheel KNOTT 250kg load-bearing capacity
- Lighting meets German Highway Code
- Multi-chamber light bulb technology
- Front position lamps, registration plate lamps and other position lamps with rubber boom in LED
- 7 or 13-pin plug
- 4 lifting eyes fitted on the corners
- Light bar width the same as wheelhouse width
- Incl. assembly of the generator
- typed
€ 14.082,00
€ 14.082,00
Incl. Tax
€ 11.735,00
Excl. Tax
In stock, immediately available
Expansion module DSE 2157 8 potential-free outputs (4x also configurable as change-over contact)
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Road chassis 750kg for generator - 1-axle special chassis
- Loading dimensions approx. 120x100cm
- Up to 750 kg total permissible weight
- Rubber spring axle maintenance-free
- Tyres 175/70R13
- No brakes
- Straight drawbar
- Welded all-steel design
- Completely hot-dip galvanised
- 1 front support wheel
- Lighting according to German Highway Code
- Plug 7 or 13-pin
- Including assembly of the power generator
- Typed
- Loading dimensions approx. 120x100cm
- Up to 750 kg total permissible weight
- Rubber spring axle maintenance-free
- Tyres 175/70R13
- No brakes
- Straight drawbar
- Welded all-steel design
- Completely hot-dip galvanised
- 1 front support wheel
- Lighting according to German Highway Code
- Plug 7 or 13-pin
- Including assembly of the power generator
- Typed
€ 4.482,00
€ 4.482,00
Incl. Tax
€ 3.735,00
Excl. Tax
In stock, immediately available
Height adjustable drawbar KHD 20 at extra cost - for tandem road chassis
- maximum permitted overall weight of 2000 kg
- With quick-action crank height adjustment
- overrun brake
- with ball coupling and interchangeable lorry towing eye
- maximum permitted overall weight of 2000 kg
- With quick-action crank height adjustment
- overrun brake
- with ball coupling and interchangeable lorry towing eye
€ 4.518,00
€ 4.518,00
Incl. Tax
€ 3.765,00
Excl. Tax
Not available at the moment or only on request!
ATS Panel DSE 335 up to 277 kVA = 250-400A, auto. power failure detection with auto. voltage switching in the event of mains failure, control cabinet for floor installation, includes DC power supply DSE 160 (for devices with unit control system with start-stop via potential-free contact e.g. DSE 3110,7310,7410, ...)
€ 13.644,00
€ 13.644,00
Incl. Tax
€ 11.370,00
Excl. Tax
Not available at the moment or only on request!
A-LTS panel up to 80 kVA = 125A for automatic voltage switching in the event of mains failure. With automatic load transfer switch A-LTS ABB OTM 125A 4-pin, in control cabinet for wall assembly. (for devices with unit control system with start-stop via potential-free contact e.g. DSE 3110, 4520, 7xxx ...)
€ 2.268,00
€ 2.268,00
Incl. Tax
€ 1.890,00
Excl. Tax
In stock, immediately available
ATS panel DSE 335 to 40 kVA = 60A, automatic power failure detection with auto voltage change in case of power failure, control cabinet for wall mounting, includes DC power supply DSE 160 (for devices with aggregate control with start-stop via potential-free contact e.g. DSE 3110, 7310, 7410, ...)
€ 6.204,00
€ 6.204,00
Incl. Tax
€ 5.170,00
Excl. Tax
Not available at the moment or only on request!
ATS Panel DSE 335 to 860 kVA = 1250A, auto. power failure detection with auto. voltage switching in the event of mains failure, control cabinet for floor installation, includes DC power supply DSE 160 (for devices with unit control system with start-stop via potential-free contact e.g. DSE 3110,7310,7410, ...)
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Lifting device for forklift (4 openings) for devices series SEDSS 60-250kVA
€ 1.440,00
€ 1.440,00
Incl. Tax
€ 1.200,00
Excl. Tax
Not available at the moment or only on request!