Universal milling machines - UFM series

  • Unique ‘2-in-1’ concept

    The swivel head of the UFM 125 and UFM 125 GT is adjusted to almost any angle and, in addition to normal face and end
    milling, allows machining of close-fitting surfaces and keyways in awkward
    For face milling of large workpiece surfaces, both machines
    can be converted into horizontal milling machines in just a few steps - the UFM
    125 can be converted into a horizontal milling machine - the UFM 125 has a horizontal
    spindle on the swivel head, the more powerful UFM 125 GT has its own horizontal spindle mount on the machine column.
    Thanks to the high drive power of 2,200 or 3,000 watts, the
    machines are suitable for face milling diameters of up to 125 or 150 mm.
    Both machines are equipped with a cross table automatic feed on the
    X and Y-axis and a rapid traverse of the Z-axis for quick table
    positioning. 11 (12) speed levels and 9 or 8
    feed speeds offer sufficient scope for optimising the
    cutting speed.
    Central lubrication of the guideways for
    fast availability and a coolant system with a tank in the machine
    base are further beneficial features. The UFM 125 is ideally suited for single and small
    batch production. For continuous operation and for larger workpieces,
    the UFM 125 GT model is recommended because of its more robust design and larger
    cross table.
  • Standard features

    - SINO SDS6-3V digital position indicator
    - Collet set 4, 5, 6, 8, 10, 12, 14
    and 16 mm with collet chuck
    (only with UFM 125 + UFM 125 GT)
    - Tool set
    - Operating instructions / CE
Universal milling machines - UFM series
Thomas Kubinger
You have a question?
I am looking forward to helping you!
Please write an or call +43 7752 80881.

Product Manager
Thomas Kubinger
Benefit from a 2-year ELMAG warranty
or extend it to 3 years by registering at

Versions and variants

Universal milling machines - UFM series

Products 1 to 3 out of 5
Product 1 out of 5
Universal milling machines - UFM series
face mills milling capacity
end mills milling capacity
mandrel holding fixture (screw mandrel)
rotational speed vertical
speed gradually vertical
rotational speed horizontal
coolant pump
speed gradually horizontal
T-slot / width x distance
mandrel radius
milling head swivel range
quill distance table min./max.
horizontal spindle distance table
router table stroke
router table surface
table length X x Y
feeds X/Y
feed steps X/Y
feed Z
motor power
feed drive X/Y
feed drive Z
mains connection
length x width
rapid traverse X/Y
table load capacity
drilling capacity in steel
speed range
speed gradually
quill stroke
t-slot width
milling head swiveling
quill feed
quill feed levels
feeds X/Y/Z
feed levels X/Y/Z
Article Number
EAN Code
Product filter



all products shown