Loading...

TIG AC/DC welding inverter AD 2540T P “Multi Line”

€ 2.304,00
€ 2.304,00 Incl. Tax
€ 1.920,00 Excl. Tax
In stock
SKU
  • Suitable for production/repair/maintenance/assembly companies as well as pipeline/metal/railing/machine/plant and container construction
  • Possibility of setting the complete TIG cycle incl. spot welding/pulse/2-cycle/4-cycle and
    repeat function
  • Digital display for welding current (A) and special functions
  • 250 Ampere max. Schweißstrom
  • 40% Einschaltdauer bei max. Schweißstrom, stufenlos regelbar
  • Three-Phase 3~400V, konform mit ÖKO-Design Richtlinie da Energieeffizienz > 85% bzw. > 80%, inkl. thermisch gesteuertem Lüfter
  • Puls Schweißen ermöglicht bessere Schweißbadkontrolle, reduzierte Wärmeeinbringung und tieferen Einbrand, Pulsfrequenz (0,5 -999 Hz) und Pulsweite (5-95%) einstellbar, weiters kann man über die AC Balance (+/-5) und die AC Frequenz (50-250 Hz) die Reinigungswirkung und Lichtbogenkonzentration beim ALU Schweißen beeinflussen
  • Einstellmöglichkeit des kompletten WIG-Zyklus inkl. Punktschweiß-/Puls-/2-Takt-, 4-Takt- & Repeat-Funktion
  • DC direct current, AC square waveform, AC sine waveform selection
  • Energy-saving, low open-circuit voltage, thermally controlled fan
  • UP/DOWN current control at the TIG hose pack with a push button +/- 20 A, optionally also stepless 0-max. amps via potentiometer
  • Im MMA/E-Hand Modus: HOT START = Zündstromerhöhung (0-100%) und ARC FORCE = Tropfenablöse/Lichtbogenregelung (0-100%) einstellbar, ANTI STICK Funktion voreingestellt, dient zur Schweißstromreduktion beim Anhaften der Elektrode um ein Ausglühen zu verhindern und diese leichter lösen zu können
  • JOB Function: 9 welding programmes can be stored
  • Furthermore, the AC balance (+/-5) and the AC frequency (50-250 Hz) can be used to influence the
    cleaning effect and arc concentration during aluminium welding
  • ANTI STICK: Automatic welding current reduction if the electrode sticks to prevent annealing zu
    and make it easier to detach it
  • GEN POWER: Operation possible by means of voltage-regulated current generator
  • The high efficiency meets the strict EU standards for environmentally friendly design
available again from week no. 48/2024
Article Number: 15065  |  EAN: 9004853150654

Shipping

welding electrodes diameter: WIG 1,0-4,0 mm / MMA 1,6-5,0 mm

  • Suitable for production/repair/maintenance/assembly companies as well as pipeline/metal/railing/machine/plant and container construction
  • Possibility of setting the complete TIG cycle incl. spot welding/pulse/2-cycle/4-cycle and
    repeat function
  • Digital display for welding current (A) and special functions
  • 250 Ampere max. Schweißstrom
  • 40% Einschaltdauer bei max. Schweißstrom, stufenlos regelbar
  • Three-Phase 3~400V, konform mit ÖKO-Design Richtlinie da Energieeffizienz > 85% bzw. > 80%, inkl. thermisch gesteuertem Lüfter
  • Puls Schweißen ermöglicht bessere Schweißbadkontrolle, reduzierte Wärmeeinbringung und tieferen Einbrand, Pulsfrequenz (0,5 -999 Hz) und Pulsweite (5-95%) einstellbar, weiters kann man über die AC Balance (+/-5) und die AC Frequenz (50-250 Hz) die Reinigungswirkung und Lichtbogenkonzentration beim ALU Schweißen beeinflussen
  • Einstellmöglichkeit des kompletten WIG-Zyklus inkl. Punktschweiß-/Puls-/2-Takt-, 4-Takt- & Repeat-Funktion
  • DC direct current, AC square waveform, AC sine waveform selection
  • Energy-saving, low open-circuit voltage, thermally controlled fan
  • UP/DOWN current control at the TIG hose pack with a push button +/- 20 A, optionally also stepless 0-max. amps via potentiometer
  • Im MMA/E-Hand Modus: HOT START = Zündstromerhöhung (0-100%) und ARC FORCE = Tropfenablöse/Lichtbogenregelung (0-100%) einstellbar, ANTI STICK Funktion voreingestellt, dient zur Schweißstromreduktion beim Anhaften der Elektrode um ein Ausglühen zu verhindern und diese leichter lösen zu können
  • JOB Function: 9 welding programmes can be stored
  • Furthermore, the AC balance (+/-5) and the AC frequency (50-250 Hz) can be used to influence the
    cleaning effect and arc concentration during aluminium welding
  • ANTI STICK: Automatic welding current reduction if the electrode sticks to prevent annealing zu
    and make it easier to detach it
  • GEN POWER: Operation possible by means of voltage-regulated current generator
  • The high efficiency meets the strict EU standards for environmentally friendly design

Advantages

  • Suitable for production/repair/maintenance/assembly companies as well as pipeline/metal/railing/machine/plant and container construction
  • Possibility of setting the complete TIG cycle incl. spot welding/pulse/2-cycle/4-cycle and
    repeat function
  • Digital display for welding current (A) and special functions
  • 250 Ampere max. Schweißstrom
  • 40% Einschaltdauer bei max. Schweißstrom, stufenlos regelbar
  • Three-Phase 3~400V, konform mit ÖKO-Design Richtlinie da Energieeffizienz > 85% bzw. > 80%, inkl. thermisch gesteuertem Lüfter
  • Puls Schweißen ermöglicht bessere Schweißbadkontrolle, reduzierte Wärmeeinbringung und tieferen Einbrand, Pulsfrequenz (0,5 -999 Hz) und Pulsweite (5-95%) einstellbar, weiters kann man über die AC Balance (+/-5) und die AC Frequenz (50-250 Hz) die Reinigungswirkung und Lichtbogenkonzentration beim ALU Schweißen beeinflussen
  • Einstellmöglichkeit des kompletten WIG-Zyklus inkl. Punktschweiß-/Puls-/2-Takt-, 4-Takt- & Repeat-Funktion
  • DC direct current, AC square waveform, AC sine waveform selection
  • Energy-saving, low open-circuit voltage, thermally controlled fan
  • UP/DOWN current control at the TIG hose pack with a push button +/- 20 A, optionally also stepless 0-max. amps via potentiometer
  • Im MMA/E-Hand Modus: HOT START = Zündstromerhöhung (0-100%) und ARC FORCE = Tropfenablöse/Lichtbogenregelung (0-100%) einstellbar, ANTI STICK Funktion voreingestellt, dient zur Schweißstromreduktion beim Anhaften der Elektrode um ein Ausglühen zu verhindern und diese leichter lösen zu können
  • JOB Function: 9 welding programmes can be stored
  • Furthermore, the AC balance (+/-5) and the AC frequency (50-250 Hz) can be used to influence the
    cleaning effect and arc concentration during aluminium welding
  • ANTI STICK: Automatic welding current reduction if the electrode sticks to prevent annealing zu
    and make it easier to detach it
  • GEN POWER: Operation possible by means of voltage-regulated current generator
  • The high efficiency meets the strict EU standards for environmentally friendly design

More Information

More Information
EAN-Number 9004853150654
No parcel service shipping Yes
Article Group "Special Programme" Yes
Product-Highlights
  • TIG/TIG AC/DC welding inverter

    Portable TIG/TIG welding inverters with modern IGBT design for alternating current (AC) and direct current (DC) welding of aluminium, steel, stainless steel and copper. Switchable between HF TIG welding with contactless high-frequency ignition, LIFT TIG welding (without HF) and MMA/E-hand welding. Available as ECO-SET-G = gas-cooled variant, ECO-SET-W = water-cooled variant incl. transport trolley.
Substitute product 55447
Files
    ELMAG - Technical details elmag_merk_269 | WIG 1,0-4,0 mm / MMA 1,6-5,0 | mm \ elmag_merk_256 | WIG 10-250 A / MMA 10-250 | A \ elmag_merk_258 | WIG 100 / 158 % / A / MMA 100 / 158 % / A | A \ elmag_merk_260 | WIG 40 / 250 % / A / MMA 40 / 250 % / A | % / A \ AAC617f001 | 14.5 | V \ elmag_merk_261 | 400 / 3 | V / ~ \ elmag_merk_274 | +10 / -10 | % \ elmag_merk_262 | 16 | AT \ EAA670f001 | IP21S | \ elmag_merk_2165 | 85 | % \ elmag_merk_2166 | 39 | W \ elmag_merk_279 | WIG 12,5 / 7,9 A / MMA 15 / 9,5 A | A \ elmag_merk_834 | 13 / 25 | O / mm2 \ elmag_merk_264 | CEE 16 A | \ AAA472f001 | 190 | mm \ AAA031f001 | 375 | mm \ AAA003f001 | 15.5 | kg \
    Low Stock Amount 1
    From this week in stock again 48/2024
    can be delivered again (date) 26.11.2024
    ELMAG goods group 1
    Filter-Category Maschinen/Geräte
    3 years warranty possible full
    Planned stock decrease 0
    Planned stock increase 10
    HNP/SP-Price € 1.440,00
    HNP/SP-Info Tier 1,1440.00
    HNP/SP-Preis 39 € 1.530,00
    HNP/SP-Sonderpreis 39 € 0,00
    Staffel HNP/SP-Info 39 1,1530.00
    Previous URL Key tig-ac-dc-welding-inverter-ad-2540t-p-15065

    Specifications

    welding electrodes diameter WIG 1,0-4,0 mm / MMA 1,6-5,0 mm
    welding current setting WIG 10-250 A / MMA 10-250 A
    100 % welding power source (10 min at 40 °C) at welding current WIG 100 / 158 % / A / MMA 100 / 158 % / A A
    welding power source (10 min at 40 °C) at welding current WIG 40 / 250 % / A / MMA 40 / 250 % / A % / A
    Open circuit voltage 14.5 V
    voltage / phases 400 / 3 V / ~
    power tolerance +10 / -10 %
    anti-surge fuse 16 AT
    Degree of protection (IP) IP21S
    Efficiency 85 %
    power consumption in idle mode 39 W
    input power l1 max. / l1 eff. WIG 12,5 / 7,9 A / MMA 15 / 9,5 A A
    ground connection plug / cross-section 13 / 25 O / mm2
    connector CEE 16 A
    Depth 190 mm
    Height 375 mm
    Weight 15.5 kg

    Substitute

    This article could be an alternative for you:

    Benefit from a 2-year ELMAG warranty
    or extend it to 3 years by registering at
    elmag.eu/3years

    Quick enquiry

    The data entered above is stored and processed by "ELMAG Entwicklungs und Handels GmbH", Hannesgrub Nord 19 - A-4911 Ried / Tumeltsham and the service providers (marketing agency, hosting partner, ERP software partner) commissioned by "ELMAG Entwicklungs und Handels GmbH", for the purpose of processing and answering my request. For more information, please see our privacy policy.

     

    Shipping duration display on product detail page:
    This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.