Lagerabverkauf

215 Products

SKU: 82157 Universal milling machine UFM 125 GTL Servodrive including 3-axis position display
Ready for operation: including oil filling, preservative removed (degreased), completely assembled and test run carried out

125 mm 1325x360x646 mm 50 mm ISO 50 60 - 1750 rpm 12 60 - 1800 rpm 12 Show more

€ 28.788,00

€ 28.788,00 Incl. Tax

€ 23.990,00 Excl. Tax

Normal-Price
Incl. Tax: € 35.988,00 -20%

Residual amounts available

Details

Add to Compare Add to Wish List Send a request

SKU: 54017 Inert gas welding machine EUROMIG plus 254

0,5 - 10 mm 0,6 - 1,2 mm 15,25 - 26,5 V 1,0 - 1,2 mm 200 / 300 mm 5/15 kg 25 - 250 A 10 Num. Show more

€ 1.858,80

€ 1.858,80 Incl. Tax

€ 1.549,00 Excl. Tax

Normal-Price
Incl. Tax: € 2.412,00 -23%

In stock, immediately available

Details

Add to Compare Add to Wish List Send a request

SKU: 81816 Hydraulic workshop press PREMIUM WPMEH 100/2-K

100 t 5.64 / 17.2 l/min 7.54 / 2.47 mm/s 9.06 mm/s 2200 W 400/50 V/Hz 2140 mm 1350 mm Show more

€ 10.680,00

€ 10.680,00 Incl. Tax

€ 8.900,00 Excl. Tax

Normal-Price
Incl. Tax: € 11.268,00 -5%

Residual amounts available

Details

Add to Compare Add to Wish List Send a request

SKU: 82108 Geared column drill GBM 5/60 SGA TOUCH Vario - continuous speed adjustment

60 mm M 36 MK 5 50-2000 rpm infinitely variable 200 mm 200 mm 14 mm Show more

€ 17.256,00

€ 17.256,00 Incl. Tax

€ 14.380,00 Excl. Tax

Normal-Price
Incl. Tax: € 19.488,00 -11%

Residual amounts available

Details

Add to Compare Add to Wish List Send a request

SKU: 54016 Inert gas welding machine EUROMIG plus 204

0,5 - 8 mm 0,6 - 1,0 mm 14,8 - 24 V 1,0 - 1,2 mm 200 / 300 mm 5/15 kg 15 - 200 A 10 Num. Show more

€ 1.642,80

€ 1.642,80 Incl. Tax

€ 1.369,00 Excl. Tax

Normal-Price
Incl. Tax: € 1.980,00 -17%

In stock, immediately available

Details

Add to Compare Add to Wish List Send a request

SKU: 42297 Automatic hose reel EUROREEL AIR OPEN 15 S

Polyurethane 10 x 15 mm 15 m 3 m 20 bar -5 to +60 °C 520x380x240 mm 15 kg Show more

€ 250,80

€ 250,80 Incl. Tax

€ 209,00 Excl. Tax

Normal-Price
Incl. Tax: € 298,80 -16%

In stock, immediately available

Details

Add to Compare Add to Wish List Send a request

SKU: 00725 SEDSS 20WDE-IT/TN - Stage 5 generator with KUBOTA motor V2203M (super-silenced) for system and direct supply

400 / 230/50 V/Hz 19 kVA 18 kVA 26 A 6.8 kVA 6.2 kVA 29 A Diesel Show more

€ 21.540,00

€ 21.540,00 Incl. Tax

€ 17.950,00 Excl. Tax

Normal-Price
Incl. Tax: € 26.988,00 -20%

In stock, immediately available

Details

Add to Compare Add to Wish List Send a request

SKU: 82153 Gearbox milling and drilling machine MFB 40 TGV

40 mm 76 mm 32 mm MK 4 75-1600 rpm 150-3200 rpm 6 120 mm Show more

€ 3.156,00

€ 3.156,00 Incl. Tax

€ 2.630,00 Excl. Tax

Normal-Price
Incl. Tax: € 3.828,00 -18%

Residual amounts available

Details

Add to Compare Add to Wish List Send a request

SKU: 54015 Inert gas welding machine EUROMIG plus 174

0,5 - 6 mm 0,6 - 0,8 mm 15,8 - 20 / 18,5 - 22,3 V 200 / 300 mm 5/15 kg 35 - 120 / 90 - 165 A 6 Num. 9 / 16 O / mm2 Show more

€ 1.174,80

€ 1.174,80 Incl. Tax

€ 979,00 Excl. Tax

Normal-Price
Incl. Tax: € 1.398,00 -16%

Residual amounts available

Details

Add to Compare Add to Wish List Send a request

SKU: 42193 Automatic hose reel ROLL AIR MEGA 20 10x15 mm

polyurethane 10 x 15 mm 20 m 2 m 15 bar 8.3 kg Plastic Show more

€ 358,80

€ 358,80 Incl. Tax

€ 299,00 Excl. Tax

Normal-Price
Incl. Tax: € 439,20 -18%

In stock, immediately available

Details

Add to Compare Add to Wish List Send a request

SKU: 00820 Automatic hose reel SET ROLL AIR PROFI 15 8x12 mm
Art. No: 42166
enclosed in cardboard box (for self-assembly):
1 pc. automatic return brake “SLOW MOTION”
Art. No: 42160

polyurethane 8 x 12 mm 15 m 2 m 15 bar 4.8 kg Show more

€ 250,80

€ 250,80 Incl. Tax

€ 209,00 Excl. Tax

Normal-Price
Incl. Tax: € 355,20 -29%

In stock, immediately available

Details

Add to Compare Add to Wish List Send a request

SKU: 82004 GBM 3/25 SNE gear column drill

25 mm M16 MK 3 105 - 2900 rpm 8 120 mm 100 mm 14 mm Show more

€ 3.336,00

€ 3.336,00 Incl. Tax

€ 2.780,00 Excl. Tax

Normal-Price
Incl. Tax: € 3.690,00 -10%

In stock, immediately available

Details

Add to Compare Add to Wish List Send a request

face mills milling capacity	125 mm
cubature	1325x360x646 mm
end mills milling capacity	50 mm
mandrel holding fixture (screw mandrel)	ISO 50
rotational speed vertical	60 - 1750 rpm
speed gradually vertical	12
rotational speed horizontal	60 - 1800 rpm
speed gradually horizontal	12
T-slot / width x distance	3 / 18 x 80 mm
mandrel radius	290 - 840 mm
milling head swivel range	± 180 °
quill distance table min./max.	646 mm
table load capacity	500 kg
horizontal spindle distance table	20 - 470 mm
router table stroke	470 mm
router table surface	1325x360 mm
table length X x Y	1100 x 320 mm
feeds X/Y	30 - 750/20 - 500 mm/min
feed steps X/Y	continuously variable
feed Z	15 - 375 mm/min
motor power	5500 W
length x width	2100 x 1800 mm
Height	2000 mm
Weight	2750 kg

Material thickness	0,5 - 10 mm
steel / stainless steel wire diameter	0,6 - 1,2 mm
welding voltage adjustment	15,25 - 26,5 V
aluminium wire diameter	1,0 - 1,2 mm
welding wire roll diameter	200 / 300 mm
welding wire roll weight	5/15 kg
welding current setting	25 - 250 A
welding current switching stages	10 Num.
ground connection plug / cross-section	9 / 25 O / mm2
welding power source (10 min at 40 °C) at welding current	20 / 250 % / A
holding capacity max	16 A
voltage / phases	400 / 3 V / ~
Mains frequency	50 Hz
anti-surge fuse	16 AT
Degree of protection (IP)	21 S
feed drive	2 Rollers
connector	CEE 16 A
Width	440 mm
Depth	750 mm
Height	640 mm
Weight	75 kg

press power max.	100 t
electorhydraulic drive	Yes
two drive speeds	Yes
hydraulic cylinder laterally adjustable	Yes
manuel handpump	Yes
press table chain (height adjustment)	Yes
oil flow step 1/2	5.64 / 17.2 l/min
piston speed step 1/2	7.54 / 2.47 mm/s
Return travel speed	9.06 mm/s
motor power	2200 W
voltage	400/50 V/Hz
machine height	2140 mm
machine length without pump	1350 mm
machine width	755 mm
inlet length	1100 mm
beam width	300 mm
inlet height max.	930 mm
machine length with pump	1665 mm
machinewidth with pump	865 mm
Piston stroke	380 mm
Weight	970 kg

drilling capacity in steel	60 mm
thread cutting performance	M 36
mandrel holding fixture (screw mandrel)	MK 5
speed range	50-2000 rpm
speed gradually	infinitely variable
quill stroke	200 mm
column diameter	200 mm
t-slot width	14 mm
drill table lift	400 mm
mandrel radius	370 mm
drill table swiveling	± 45 °
drill head swiveling	± 45 °
quill distance socket	1123 mm
quill distance table min./max.	520 mm
drilling table surface	600x500 mm
motor power	(2-stage) 4,000 W
voltage	400/50 V/Hz
cubature	1040x720x2240 mm
height (total)	2440 mm
Weight	790 kg

Material thickness	0,5 - 8 mm
steel / stainless steel wire diameter	0,6 - 1,0 mm
welding voltage adjustment	14,8 - 24 V
aluminium wire diameter	1,0 - 1,2 mm
welding wire roll diameter	200 / 300 mm
welding wire roll weight	5/15 kg
welding current setting	15 - 200 A
welding current switching stages	10 Num.
ground connection plug / cross-section	9 / 25 O / mm2
welding power source (10 min at 40 °C) at welding current	20 / 200 % / A
holding capacity max	12 A
voltage / phases	400 / 3 V / ~
Mains frequency	50 Hz
anti-surge fuse	16 AT
Degree of protection (IP)	21 S
feed drive	2 Rollers
connector	CEE 16 A
Width	440 mm
Depth	750 mm
Height	640 mm
Weight	70 kg

hose quality	Polyurethane
hose-Ø inside x outside	10 x 15 mm
hose length	15 m
hose length supply	3 m
Max. working pressure	20 bar
working temperature	-5 to +60 °C
Dimensions	520x380x240 mm
Weight	15 kg

voltage frequency	400 / 230/50 V/Hz
maximum power 3~400V	19 kVA
continuous power 3~400V	18 kVA
power 3~400V continuous	26 A
maximum power 1~230V	6.8 kVA
continuous power 1 ~ 230V	6.2 kVA
Power 1 ~ 230V continuous	29 A
fuel	Diesel
rotational	1500 rpm
cooling	water-cooled
engine type	V2203M
emission level	5
engine power	17 kW
capacity	2197 cm3
cylinder	4
tank capacity	80 l
consumption at 75% load	3.7 l/h
Running time per tank filling at 75% load	21.6 h
dimensions lxbxh	1980x740x1000 mm
weight (without fuel)	660 kg
sound power complies with RL 2000/14/EG, 2005/88/EG	90 LWA
sound pressure level in 7m	65 dB(A)

drilling capacity in steel	40 mm
face mills milling capacity	76 mm
end mills milling capacity	32 mm
mandrel holding fixture (screw mandrel)	MK 4
rotational speed 1	75-1600 rpm
rotational speed 2	150-3200 rpm
speed gradually	6
quill stroke	120 mm
t-slot width	14 mm
milling head stroke	450 mm
mandrel radius	210 mm
milling head swivel range	± 45 °
quill distance table min./max.	25-450 mm
quill feed	0,10/0,18/0,28 mm/rev
router table surface	730x210 mm
table length X x Y	500x210 mm
quill feed levels	3
motor power	1500 W
voltage	400/50 V/Hz
length x width	850x760 mm
Height	1150 mm
Weight	260 kg

Material thickness	0,5 - 6 mm
steel / stainless steel wire diameter	0,6 - 0,8 mm
welding voltage adjustment	15,8 - 20 / 18,5 - 22,3 V
welding wire roll diameter	200 / 300 mm
welding wire roll weight	5/15 kg
welding current setting	35 - 120 / 90 - 165 A
welding current switching stages	6 Num.
ground connection plug / cross-section	9 / 16 O / mm2
welding power source (10 min at 40 °C) at welding current	10/120 / 10/165 % / A
holding capacity max	20/17 A
voltage / phases	230 / 1 \| 400 / 3 V / ~
Mains frequency	50 Hz
anti-surge fuse	16 AT
Degree of protection (IP)	21 S
feed drive	2 Rollers
connector	CEE 16 A
Width	440 mm
Depth	750 mm
Height	640 mm
Weight	60 kg

drilling capacity in steel	25 mm
thread cutting performance	M16
mandrel holding fixture (screw mandrel)	MK 3
speed range	105 - 2900 rpm
speed gradually	8
quill stroke	120 mm
column diameter	100 mm
t-slot width	14 mm
drill head lift	580 mm
drill table lift	530 mm
mandrel radius	255 mm
drill table revolving	± 180 °
drill head revolving	± 180 °
quill distance table min./max.	0 - 840 mm
drilling table surface	500x350 mm
motor power	(2-stage) 900/650 W
voltage	400/50 V/Hz
cubature	500x350x840 mm
base plate surface	400x500 mm
Weight	180 kg

ELMAG Summer Sale / Stock sale