RÖHM three-jaw lathe chuck DM 200, taper 6, DIN 55029
steel body, Camlock
€ 1.608,00
€ 1.608,00
Incl. Tax
€ 1.340,00
Excl. Tax
In stock
SKU
- Reliable, high-quality flat spiral chucks for universal use
- Centrally clamping three and four-jaw chucks to DIN 6350
for high clamping forces and loads due to heavy workpieces,
high speeds and high cutting performance - Very robust cast iron (ZG) or steel body (ZS), low profile
- Round and axial runout according to DIN 6386
- Very good repeatable clamping accuracy
- For use on lathes, rotary tables, dividing heads, etc.
- Through hole for bar machining
- One set each of drilling and turning jaws, hardened and ground:
- 3 or 4 pcs. drilling jaws BB stepped outwards
- 3 or 4 pcs. DB turning jaws stepped inwards - With clamping wrench and fastening screws
- With stud bolts for Camlock system
- Various taper mounting sizes
In stock, immediately available
Article Number: 88946
|
EAN: 9004853889462
Cone size: 6
Downloads
- Reliable, high-quality flat spiral chucks for universal use
- Centrally clamping three and four-jaw chucks to DIN 6350
for high clamping forces and loads due to heavy workpieces,
high speeds and high cutting performance - Very robust cast iron (ZG) or steel body (ZS), low profile
- Round and axial runout according to DIN 6386
- Very good repeatable clamping accuracy
- For use on lathes, rotary tables, dividing heads, etc.
- Through hole for bar machining
- One set each of drilling and turning jaws, hardened and ground:
- 3 or 4 pcs. drilling jaws BB stepped outwards
- 3 or 4 pcs. DB turning jaws stepped inwards - With clamping wrench and fastening screws
- With stud bolts for Camlock system
- Various taper mounting sizes
Advantages
- Reliable, high-quality flat spiral chucks for universal use
- Centrally clamping three and four-jaw chucks to DIN 6350
for high clamping forces and loads due to heavy workpieces,
high speeds and high cutting performance - Very robust cast iron (ZG) or steel body (ZS), low profile
- Round and axial runout according to DIN 6386
- Very good repeatable clamping accuracy
- For use on lathes, rotary tables, dividing heads, etc.
- Through hole for bar machining
- One set each of drilling and turning jaws, hardened and ground:
- 3 or 4 pcs. drilling jaws BB stepped outwards
- 3 or 4 pcs. DB turning jaws stepped inwards - With clamping wrench and fastening screws
- With stud bolts for Camlock system
- Various taper mounting sizes
More Information
EAN-Number | 9004853889462 |
---|---|
No parcel service shipping | Yes |
Article Group "Special Programme" | Yes |
Product-Highlights |
|
Substitute product | 88947 |
Files | |
ELMAG - Technical details | AAB413f001 | 6 | \ elmag_merk_919 | 106.4 | mm \ EAB325f001 | 74.5 | mm \ elmag_merk_913 | 55 | mm \ elmag_merk_920 | 133.4 | mm \ elmag_merk_917 | 26.7 | mm \ elmag_merk_921 | 6 | mm \ AAA003f001 | 15.5 | kg \ |
Low Stock Amount | 0 |
ELMAG goods group | 6 |
Filter-Category | Zubehör |
3 years warranty possible | none |
Planned stock decrease | 1 |
Planned stock increase | 0 |
HNP/SP-Price | € 999,00 |
HNP/SP-Info Tier | 1,999.00 |
HNP/SP-Preis 39 | € 1.060,00 |
HNP/SP-Sonderpreis 39 | € 0,00 |
Staffel HNP/SP-Info 39 | 1,1060.00 |
Previous URL Key | roehm-three-jaw-lathe-chuck-88946 |
Specifications
Cone size | 6 |
recess | 106.4 mm |
Body height | 74.5 mm |
passage drill diameter | 55 mm |
camlock diameter | 133.4 mm |
drive high | 26.7 mm |
hole number mounting | 6 mm |
Weight | 15.5 kg |
Substitute
This article could be an alternative for you:
Downloads
RÖHM three-jaw lathe chuck DM 200, taper 5, DIN 55029
steel body, camlock
steel body, camlock
€ 1.608,00
€ 1.608,00
Incl. Tax
€ 1.340,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 250, taper 6, DIN 55029
steel body, Camlock
steel body, Camlock
€ 2.010,00
€ 2.010,00
Incl. Tax
€ 1.675,00
Excl. Tax
Residual amounts available
RÖHM three-jaw lathe chuck DM 160, cone 3, DIN 55029
steel body, camlock
steel body, camlock
€ 1.198,80
€ 1.198,80
Incl. Tax
€ 999,00
Excl. Tax
Not available at the moment or only on request!
Soft block baking suitable for Three-jaw lathe chuck DM 250
(1 set = 3 pcs.)
(1 set = 3 pcs.)
€ 364,80
€ 364,80
Incl. Tax
€ 304,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 160, taper 4, DIN 55029
steel body, Camlock
steel body, Camlock
€ 1.198,80
€ 1.198,80
Incl. Tax
€ 999,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 125, DIN 6350
cast body
cast body
€ 850,80
€ 850,80
Incl. Tax
€ 709,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 100, DIN 6350
Cast body
Cast body
€ 751,20
€ 751,20
Incl. Tax
€ 626,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 160, taper 5, DIN 55029
steel body, Camlock
steel body, Camlock
€ 1.198,80
€ 1.198,80
Incl. Tax
€ 999,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 200, taper 4, DIN 55029
steel body, Camlock
steel body, Camlock
€ 1.608,00
€ 1.608,00
Incl. Tax
€ 1.340,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 250, taper 8, DIN 55029
steel body, Camlock
steel body, Camlock
€ 2.010,00
€ 2.010,00
Incl. Tax
€ 1.675,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 250, taper 5, DIN 55029
steel body, Camlock
steel body, Camlock
€ 2.010,00
€ 2.010,00
Incl. Tax
€ 1.675,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 200, taper 3, DIN 55029
steel body, Camlock
steel body, Camlock
€ 1.608,00
€ 1.608,00
Incl. Tax
€ 1.340,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 250, taper 4, DIN 55029
steel body, Camlock
steel body, Camlock
€ 2.010,00
€ 2.010,00
Incl. Tax
€ 1.675,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 315, taper 6, DIN 55029
steel body, Camlock
steel body, Camlock
€ 4.788,00
€ 4.788,00
Incl. Tax
€ 3.990,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 315, taper 11, DIN 55029
Steel body, Camlock
Steel body, Camlock
€ 4.788,00
€ 4.788,00
Incl. Tax
€ 3.990,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 315, taper 8, DIN 55029
steel body, Camlock
steel body, Camlock
€ 4.788,00
€ 4.788,00
Incl. Tax
€ 3.990,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 315, taper 5, DIN 55029
steel body, Camlock
steel body, Camlock
€ 4.788,00
€ 4.788,00
Incl. Tax
€ 3.990,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 250, DIN 6350
cast body
cast body
€ 1.548,00
€ 1.548,00
Incl. Tax
€ 1.290,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 160, DIN 6350
cast body
cast body
€ 932,40
€ 932,40
Incl. Tax
€ 777,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 315, DIN 6350
Cast body
Cast body
€ 2.862,00
€ 2.862,00
Incl. Tax
€ 2.385,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 200, DIN 6350
Cast body
Cast body
€ 1.082,40
€ 1.082,40
Incl. Tax
€ 902,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 125, DIN 6350
steel body
steel body
€ 1.254,00
€ 1.254,00
Incl. Tax
€ 1.045,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 315, DIN 6350
Steel body
Steel body
€ 3.468,00
€ 3.468,00
Incl. Tax
€ 2.890,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 200, DIN 6350
Steel body
Steel body
€ 1.776,00
€ 1.776,00
Incl. Tax
€ 1.480,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 250, DIN 6350
Steel body
Steel body
€ 2.460,00
€ 2.460,00
Incl. Tax
€ 2.050,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 160, DIN 6350
Steel body
Steel body
€ 1.476,00
€ 1.476,00
Incl. Tax
€ 1.230,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 100, DIN 6350
Steel body
Steel body
€ 1.119,60
€ 1.119,60
Incl. Tax
€ 933,00
Excl. Tax
Not available at the moment or only on request!
Soft block baking suitable for Three-jaw lathe chuck DM 200
(1 set = 3 pcs.)
(1 set = 3 pcs.)
€ 274,80
€ 274,80
Incl. Tax
€ 229,00
Excl. Tax
In stock, immediately available
Soft block baking suitable for Three-jaw lathe chuck DM 160
(1 set = 3 pcs.)
(1 set = 3 pcs.)
€ 246,00
€ 246,00
Incl. Tax
€ 205,00
Excl. Tax
In stock, immediately available
Soft block baking suitable for Three-jaw lathe chuck DM 315
(1 set = 3 pcs.)
(1 set = 3 pcs.)
€ 525,60
€ 525,60
Incl. Tax
€ 438,00
Excl. Tax
In stock, immediately available
Soft block baking suitable for Three-jaw lathe chuck DM 125
(1 set = 3 pcs.)
(1 set = 3 pcs.)
€ 182,40
€ 182,40
Incl. Tax
€ 152,00
Excl. Tax
In stock, immediately available
Shipping duration display on product detail page:
This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.