RÖHM three-jaw lathe chuck DM 100, DIN 6350
Steel body
€ 1.119,60
€ 1.119,60
Incl. Tax
€ 933,00
Excl. Tax
In stock
SKU
- Reliable, high-quality flat spiral chucks for universal use
- Centrally clamping three and four-jaw chucks to DIN 6350
for high clamping forces and loads due to heavy workpieces,
high speeds and high cutting performance - Very robust cast iron (ZG) or steel body (ZS), low profile
- Round and axial runout according to DIN 6386
- Very good repeatable clamping accuracy
- For use on lathes, rotary tables, dividing heads, etc.
- Through hole for bar machining
- One set each of drilling and turning jaws, hardened and ground:
- 3 or 4 pcs. drilling jaws BB stepped outwards
- 3 or 4 pcs. DB turning jaws stepped inwards - With clamping wrench and fastening screws
- With cylindrical centring holder (size B, C)
Not available at the moment or only on request!
Article Number: 88931
|
EAN: 9004853889318
inch: 4
Downloads
- Reliable, high-quality flat spiral chucks for universal use
- Centrally clamping three and four-jaw chucks to DIN 6350
for high clamping forces and loads due to heavy workpieces,
high speeds and high cutting performance - Very robust cast iron (ZG) or steel body (ZS), low profile
- Round and axial runout according to DIN 6386
- Very good repeatable clamping accuracy
- For use on lathes, rotary tables, dividing heads, etc.
- Through hole for bar machining
- One set each of drilling and turning jaws, hardened and ground:
- 3 or 4 pcs. drilling jaws BB stepped outwards
- 3 or 4 pcs. DB turning jaws stepped inwards - With clamping wrench and fastening screws
- With cylindrical centring holder (size B, C)
Advantages
- Reliable, high-quality flat spiral chucks for universal use
- Centrally clamping three and four-jaw chucks to DIN 6350
for high clamping forces and loads due to heavy workpieces,
high speeds and high cutting performance - Very robust cast iron (ZG) or steel body (ZS), low profile
- Round and axial runout according to DIN 6386
- Very good repeatable clamping accuracy
- For use on lathes, rotary tables, dividing heads, etc.
- Through hole for bar machining
- One set each of drilling and turning jaws, hardened and ground:
- 3 or 4 pcs. drilling jaws BB stepped outwards
- 3 or 4 pcs. DB turning jaws stepped inwards - With clamping wrench and fastening screws
- With cylindrical centring holder (size B, C)
More Information
EAN-Number | 9004853889318 |
---|---|
No parcel service shipping | No |
Article Group "Special Programme" | Yes |
Product-Highlights |
|
Substitute product | 88901 |
Files | |
ELMAG - Technical details | elmag_merk_918 | 4 | \ elmag_merk_901 | 6300 | rpm \ elmag_merk_902 | 60 | Nm \ elmag_merk_904 | 27 | kN \ elmag_merk_903 | 3 - 38 | mm \ elmag_merk_905 | 3 - 38 | mm \ elmag_merk_907 | 38 - 71 | mm \ elmag_merk_906 | 70 - 100 | mm \ elmag_merk_908 | 33 - 66 | mm \ elmag_merk_909 | 65 - 94 | mm \ AAA520f001 | 128 | mm \ elmag_merk_910 | 100 | mm \ elmag_merk_911 | 70 | mm \ elmag_merk_912 | 3 | mm \ EAB325f001 | 50 | mm \ elmag_merk_913 | 20 | mm \ elmag_merk_914 | 83 | mm \ elmag_merk_916 | 3 x M8 | \ AAA662f001 | 48 | mm \ elmag_merk_915 | 18 | mm \ EAB699f001 | 8 | mm \ elmag_merk_917 | 18 | mm \ AAA003f001 | 2.9 | kg \ |
Low Stock Amount | 0 |
ELMAG goods group | 6 |
Filter-Category | Zubehör |
3 years warranty possible | none |
Planned stock decrease | 0 |
Planned stock increase | 0 |
HNP/SP-Price | € 701,00 |
HNP/SP-Info Tier | 1,701.00 |
HNP/SP-Preis 39 | € 744,00 |
HNP/SP-Sonderpreis 39 | € 0,00 |
Staffel HNP/SP-Info 39 | 1,744.00 |
Previous URL Key | roehm-three-jaw-lathe-chuck-88931 |
Specifications
inch | 4 |
rotational speed max. | 6300 rpm |
moment of torque at key | 60 Nm |
total clamping force | 27 kN |
outer voltage Ø size A1 BB | 3 - 38 mm |
outer voltage Ø size A2 DB | 3 - 38 mm |
outer voltage Ø size A3 DB | 38 - 71 mm |
outer voltage Ø size A4 DB | 70 - 100 mm |
inside voltage Ø size J1 | 33 - 66 mm |
inside voltage Ø size J2 | 65 - 94 mm |
Circulation diameter | 128 mm |
rotating feed outer diameter | 100 mm |
centre holding diameter | 70 mm |
deep centre holding | 3 mm |
Body height | 50 mm |
passage drill diameter | 20 mm |
hole circle diameter | 83 mm |
centre flange thread | 3 x M8 |
Jaw length | 48 mm |
jaw high overstand | 18 mm |
Wrench width | 8 mm |
drive high | 18 mm |
Weight | 2.9 kg |
Substitute
This article could be an alternative for you:
Downloads
RÖHM three-jaw lathe chuck DM 200, taper 5, DIN 55029
steel body, camlock
steel body, camlock
€ 1.608,00
€ 1.608,00
Incl. Tax
€ 1.340,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 250, taper 6, DIN 55029
steel body, Camlock
steel body, Camlock
€ 2.010,00
€ 2.010,00
Incl. Tax
€ 1.675,00
Excl. Tax
Residual amounts available
RÖHM three-jaw lathe chuck DM 200, taper 6, DIN 55029
steel body, Camlock
steel body, Camlock
€ 1.608,00
€ 1.608,00
Incl. Tax
€ 1.340,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 160, cone 3, DIN 55029
steel body, camlock
steel body, camlock
€ 1.198,80
€ 1.198,80
Incl. Tax
€ 999,00
Excl. Tax
Not available at the moment or only on request!
Soft block baking suitable for Three-jaw lathe chuck DM 250
(1 set = 3 pcs.)
(1 set = 3 pcs.)
€ 364,80
€ 364,80
Incl. Tax
€ 304,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 160, taper 4, DIN 55029
steel body, Camlock
steel body, Camlock
€ 1.198,80
€ 1.198,80
Incl. Tax
€ 999,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 125, DIN 6350
cast body
cast body
€ 850,80
€ 850,80
Incl. Tax
€ 709,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 100, DIN 6350
Cast body
Cast body
€ 751,20
€ 751,20
Incl. Tax
€ 626,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 125, DIN 6350
steel body
steel body
€ 1.254,00
€ 1.254,00
Incl. Tax
€ 1.045,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 315, DIN 6350
Steel body
Steel body
€ 3.468,00
€ 3.468,00
Incl. Tax
€ 2.890,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 200, DIN 6350
Steel body
Steel body
€ 1.776,00
€ 1.776,00
Incl. Tax
€ 1.480,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 250, DIN 6350
Steel body
Steel body
€ 2.460,00
€ 2.460,00
Incl. Tax
€ 2.050,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 160, DIN 6350
Steel body
Steel body
€ 1.476,00
€ 1.476,00
Incl. Tax
€ 1.230,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 250, DIN 6350
cast body
cast body
€ 1.548,00
€ 1.548,00
Incl. Tax
€ 1.290,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 160, DIN 6350
cast body
cast body
€ 932,40
€ 932,40
Incl. Tax
€ 777,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 315, DIN 6350
Cast body
Cast body
€ 2.862,00
€ 2.862,00
Incl. Tax
€ 2.385,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 200, DIN 6350
Cast body
Cast body
€ 1.082,40
€ 1.082,40
Incl. Tax
€ 902,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 160, taper 5, DIN 55029
steel body, Camlock
steel body, Camlock
€ 1.198,80
€ 1.198,80
Incl. Tax
€ 999,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 200, taper 4, DIN 55029
steel body, Camlock
steel body, Camlock
€ 1.608,00
€ 1.608,00
Incl. Tax
€ 1.340,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 250, taper 8, DIN 55029
steel body, Camlock
steel body, Camlock
€ 2.010,00
€ 2.010,00
Incl. Tax
€ 1.675,00
Excl. Tax
Residual amounts available
RÖHM three-jaw lathe chuck DM 250, taper 5, DIN 55029
steel body, Camlock
steel body, Camlock
€ 2.010,00
€ 2.010,00
Incl. Tax
€ 1.675,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 200, taper 3, DIN 55029
steel body, Camlock
steel body, Camlock
€ 1.608,00
€ 1.608,00
Incl. Tax
€ 1.340,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 250, taper 4, DIN 55029
steel body, Camlock
steel body, Camlock
€ 2.010,00
€ 2.010,00
Incl. Tax
€ 1.675,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 315, taper 6, DIN 55029
steel body, Camlock
steel body, Camlock
€ 4.788,00
€ 4.788,00
Incl. Tax
€ 3.990,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 315, taper 11, DIN 55029
Steel body, Camlock
Steel body, Camlock
€ 4.788,00
€ 4.788,00
Incl. Tax
€ 3.990,00
Excl. Tax
In stock, immediately available
RÖHM three-jaw lathe chuck DM 315, taper 8, DIN 55029
steel body, Camlock
steel body, Camlock
€ 4.788,00
€ 4.788,00
Incl. Tax
€ 3.990,00
Excl. Tax
Not available at the moment or only on request!
RÖHM three-jaw lathe chuck DM 315, taper 5, DIN 55029
steel body, Camlock
steel body, Camlock
€ 4.788,00
€ 4.788,00
Incl. Tax
€ 3.990,00
Excl. Tax
Not available at the moment or only on request!
Soft block baking suitable for Three-jaw lathe chuck DM 200
(1 set = 3 pcs.)
(1 set = 3 pcs.)
€ 274,80
€ 274,80
Incl. Tax
€ 229,00
Excl. Tax
In stock, immediately available
Soft block baking suitable for Three-jaw lathe chuck DM 160
(1 set = 3 pcs.)
(1 set = 3 pcs.)
€ 246,00
€ 246,00
Incl. Tax
€ 205,00
Excl. Tax
In stock, immediately available
Soft block baking suitable for Three-jaw lathe chuck DM 315
(1 set = 3 pcs.)
(1 set = 3 pcs.)
€ 525,60
€ 525,60
Incl. Tax
€ 438,00
Excl. Tax
In stock, immediately available
Soft block baking suitable for Three-jaw lathe chuck DM 125
(1 set = 3 pcs.)
(1 set = 3 pcs.)
€ 182,40
€ 182,40
Incl. Tax
€ 152,00
Excl. Tax
In stock, immediately available
Shipping duration display on product detail page:
This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.