Loading...

RÖHM four-jaw lathe chuck DM 200, DIN 6350
Steel body

€ 2.010,00
€ 2.010,00 Incl. Tax
€ 1.675,00 Excl. Tax
In stock
SKU
  • Reliable, high-quality flat spiral chucks for universal use
  • Centrally clamping three and four-jaw chucks to DIN 6350 for high clamping forces and loads due to heavy workpieces, high speeds and high cutting performance
  • Very robust cast iron (ZG) or steel body (ZS), low profile
  • With cylindrical centring holder (size B, C)
  • Round and axial runout according to DIN 6386
  • Very good repeatable clamping accuracy
  • For use on lathes, rotary tables, dividing heads, etc.
  • Through hole for bar machining
  • One set each of drilling and turning jaws, hardened and ground:
    - 3 or 4 pcs. drilling jaws BB stepped outwards
    - 3 or 4 pcs. DB turning jaws stepped inwards
  • With clamping wrench and fastening screws
Not available at the moment or only on request!
Article Number: 88994  |  EAN: 9004853889943

Shipping

inch: 8 inches

  • Reliable, high-quality flat spiral chucks for universal use
  • Centrally clamping three and four-jaw chucks to DIN 6350 for high clamping forces and loads due to heavy workpieces, high speeds and high cutting performance
  • Very robust cast iron (ZG) or steel body (ZS), low profile
  • With cylindrical centring holder (size B, C)
  • Round and axial runout according to DIN 6386
  • Very good repeatable clamping accuracy
  • For use on lathes, rotary tables, dividing heads, etc.
  • Through hole for bar machining
  • One set each of drilling and turning jaws, hardened and ground:
    - 3 or 4 pcs. drilling jaws BB stepped outwards
    - 3 or 4 pcs. DB turning jaws stepped inwards
  • With clamping wrench and fastening screws

Advantages

  • Reliable, high-quality flat spiral chucks for universal use
  • Centrally clamping three and four-jaw chucks to DIN 6350 for high clamping forces and loads due to heavy workpieces, high speeds and high cutting performance
  • Very robust cast iron (ZG) or steel body (ZS), low profile
  • With cylindrical centring holder (size B, C)
  • Round and axial runout according to DIN 6386
  • Very good repeatable clamping accuracy
  • For use on lathes, rotary tables, dividing heads, etc.
  • Through hole for bar machining
  • One set each of drilling and turning jaws, hardened and ground:
    - 3 or 4 pcs. drilling jaws BB stepped outwards
    - 3 or 4 pcs. DB turning jaws stepped inwards
  • With clamping wrench and fastening screws

More Information

More Information
EAN-Number 9004853889943
No parcel service shipping Yes
Article Group "Special Programme" Yes
Product-Highlights
  • RÖHM-Vjaw lathe chucks ZG4 and ZS4jaw four-jaw lathe chucks

    Four-jaw lathe chucks are particularly suitable for holding square, polygonal and shaped turning elements that cannot be clamped in three-jaw lathe chucks
  • Lathe chuck handling

    - Smooth-running, quick clamping without particular force
    - Clamping jaws adjustable over the entire clamping range, reversible and exchangeable
    - Easy lubrication
  • Cast body versus steel body

    - Cast body models ZG3 and ZG4:
    slightly cheaper, speed limit adjusted to permissible peripheral speed for cast iron
    - Steel body models ZS3 and ZS4:
    High load capacity, significantly more speed
Substitute product 88964
Files
    ELMAG - Technical details elmag_merk_918 | 8 | inches \ elmag_merk_901 | 4000 | rpm \ elmag_merk_902 | 140 | Nm \ elmag_merk_904 | 55 | kN \ elmag_merk_903 | 4 - 100 | mm \ elmag_merk_905 | 4 - 100 | mm \ elmag_merk_907 | 56 - 152 | mm \ elmag_merk_906 | 104 - 200 | mm \ elmag_merk_908 | 44 - 140 | mm \ elmag_merk_909 | 92 - 186 | mm \ AAA520f001 | 238 | mm \ elmag_merk_910 | 200 | mm \ elmag_merk_911 | 160 | mm \ elmag_merk_912 | 4 | mm \ EAB325f001 | 73.5 | mm \ elmag_merk_913 | 55 | mm \ elmag_merk_914 | 176 | mm \ elmag_merk_916 | 3 x M10 | \ AAA662f001 | 69 | mm \ elmag_merk_915 | 32.5 | mm \ EAB699f001 | 11 | mm \ elmag_merk_917 | 25.7 | mm \ AAA003f001 | 14.6 | kg \
    Low Stock Amount 0
    ELMAG goods group 6
    Filter-Category Zubehör
    3 years warranty possible none
    Planned stock decrease 0
    Planned stock increase 0
    HNP/SP-Price € 1.245,00
    HNP/SP-Info Tier 1,1245.00
    Previous URL Key roehm-four-jaw-lathe-chuck-88994

    Specifications

    inch 8 inches
    rotational speed max. 4000 rpm
    moment of torque at key 140 Nm
    total clamping force 55 kN
    outer voltage Ø size A1 BB 4 - 100 mm
    outer voltage Ø size A2 DB 4 - 100 mm
    outer voltage Ø size A3 DB 56 - 152 mm
    outer voltage Ø size A4 DB 104 - 200 mm
    inside voltage Ø size J1 44 - 140 mm
    inside voltage Ø size J2 92 - 186 mm
    Circulation diameter 238 mm
    rotating feed outer diameter 200 mm
    centre holding diameter 160 mm
    deep centre holding 4 mm
    Body height 73.5 mm
    passage drill diameter 55 mm
    hole circle diameter 176 mm
    centre flange thread 3 x M10
    Jaw length 69 mm
    jaw high overstand 32.5 mm
    Wrench width 11 mm
    drive high 25.7 mm
    Weight 14.6 kg
    ALTERNATIVE PRODUCTS
    RÖHM four-jaw lathe chuck DM 250, taper 8, DIN 55029
    steel body, Camlock
    € 3.924,00
    € 3.924,00 Incl. Tax
    € 3.270,00 Excl. Tax
    In stock, immediately available
    RÖHM four-jaw lathe chuck DM 250, DIN 6350
    Steel body
    € 2.856,00
    € 2.856,00 Incl. Tax
    € 2.380,00 Excl. Tax
    Not available at the moment or only on request!
    Soft block baking suitable for Four-jaw lathe chuck DM 160
    (1 set = 4 pcs.)
    € 306,00
    € 306,00 Incl. Tax
    € 255,00 Excl. Tax
    Not available at the moment or only on request!
    RÖHM four-jaw lathe chuck DM 100, DIN 6350
    Steel body
    € 1.254,00
    € 1.254,00 Incl. Tax
    € 1.045,00 Excl. Tax
    Not available at the moment or only on request!
    RÖHM four-jaw lathe chuck DM 160, DIN 6350
    Steel body
    € 1.722,00
    € 1.722,00 Incl. Tax
    € 1.435,00 Excl. Tax
    Not available at the moment or only on request!
    RÖHM four-jaw lathe chuck DM 125, DIN 6350
    steel body
    € 1.476,00
    € 1.476,00 Incl. Tax
    € 1.230,00 Excl. Tax
    Not available at the moment or only on request!
    RÖHM four-jaw lathe chuck DM 315, DIN 6350
    Steel body
    € 4.020,00
    € 4.020,00 Incl. Tax
    € 3.350,00 Excl. Tax
    Not available at the moment or only on request!
    RÖHM four-jaw lathe chuck DM 250, taper 4, DIN 55029
    steel body, Camlock
    € 3.924,00
    € 3.924,00 Incl. Tax
    € 3.270,00 Excl. Tax
    Not available at the moment or only on request!
    RÖHM four-jaw lathe chuck DM 200, taper 3, DIN 55029
    steel body, Camlock
    € 2.868,00
    € 2.868,00 Incl. Tax
    € 2.390,00 Excl. Tax
    Not available at the moment or only on request!
    RÖHM four-jaw lathe chuck DM 315, taper 6, DIN 55029
    steel body, Camlock
    € 5.448,00
    € 5.448,00 Incl. Tax
    € 4.540,00 Excl. Tax
    Not available at the moment or only on request!
    RÖHM four-jaw lathe chuck DM 200, taper 6, DIN 55029
    steel body, Camlock
    € 2.802,00
    € 2.802,00 Incl. Tax
    € 2.335,00 Excl. Tax
    In stock, immediately available
    RÖHM four-jaw lathe chuck DM 315, taper 8, DIN 55029
    steel body, Camlock
    € 5.448,00
    € 5.448,00 Incl. Tax
    € 4.540,00 Excl. Tax
    In stock, immediately available
    RÖHM four-jaw lathe chuck DM 160, taper 4, DIN 55029
    steel body, Camlock
    € 2.400,00
    € 2.400,00 Incl. Tax
    € 2.000,00 Excl. Tax
    In stock, immediately available
    RÖHM four-jaw lathe chuck DM 200, taper 5, DIN 55029
    steel body, camlock
    € 2.802,00
    € 2.802,00 Incl. Tax
    € 2.335,00 Excl. Tax
    Residual amounts available
    RÖHM four-jaw lathe chuck DM 250, taper 5, DIN 55029
    steel body, Camlock
    € 3.924,00
    € 3.924,00 Incl. Tax
    € 3.270,00 Excl. Tax
    Not available at the moment or only on request!
    RÖHM four-jaw lathe chuck DM 315, taper 5, DIN 55029
    steel body, Camlock
    € 5.448,00
    € 5.448,00 Incl. Tax
    € 4.540,00 Excl. Tax
    Not available at the moment or only on request!
    RÖHM four-jaw lathe chuck DM 315, taper 11, DIN 55029
    Steel body, Camlock
    € 5.448,00
    € 5.448,00 Incl. Tax
    € 4.540,00 Excl. Tax
    In stock, immediately available
    RÖHM four-jaw lathe chuck DM 200, taper 4, DIN 55029
    steel body, Camlock
    € 2.802,00
    € 2.802,00 Incl. Tax
    € 2.335,00 Excl. Tax
    In stock, immediately available
    RÖHM four-jaw lathe chuck DM 160, taper 5, DIN 55029
    steel body, Camlock
    € 2.460,00
    € 2.460,00 Incl. Tax
    € 2.050,00 Excl. Tax
    In stock, immediately available
    RÖHM four-jaw lathe chuck DM 250, taper 6, DIN 55029
    steel body, Camlock
    € 3.924,00
    € 3.924,00 Incl. Tax
    € 3.270,00 Excl. Tax
    In stock, immediately available
    RÖHM four-jaw lathe chuck DM 100, DIN 6350
    Cast body
    € 883,20
    € 883,20 Incl. Tax
    € 736,00 Excl. Tax
    Not available at the moment or only on request!
    RÖHM four-jaw lathe chuck DM 160, DIN 6350
    cast body
    € 996,00
    € 996,00 Incl. Tax
    € 830,00 Excl. Tax
    In stock, immediately available
    RÖHM four-jaw lathe chuck DM 125, DIN 6350
    cast body
    € 932,40
    € 932,40 Incl. Tax
    € 777,00 Excl. Tax
    Not available at the moment or only on request!
    Soft block baking suitable for Four-jaw lathe chuck DM 250
    (1 set = 4 pcs.)
    € 492,00
    € 492,00 Incl. Tax
    € 410,00 Excl. Tax
    In stock, immediately available
    Soft block baking suitable for Four-jaw lathe chuck DM 200
    (1 set = 4 pcs.)
    € 379,20
    € 379,20 Incl. Tax
    € 316,00 Excl. Tax
    Not available at the moment or only on request!
    Soft block baking suitable for Four-jaw lathe chuck DM 315
    (1 set = 4 pcs.)
    € 699,60
    € 699,60 Incl. Tax
    € 583,00 Excl. Tax
    Not available at the moment or only on request!
    Soft block baking suitable for Four-jaw lathe chuck DM 125
    (1 set = 4 pcs.)
    € 262,80
    € 262,80 Incl. Tax
    € 219,00 Excl. Tax
    Not available at the moment or only on request!
    Benefit from a 2-year ELMAG warranty
    or extend it to 3 years by registering at
    elmag.eu/3years

    Quick enquiry

    The data entered above is stored and processed by "ELMAG Entwicklungs und Handels GmbH", Hannesgrub Nord 19 - A-4911 Ried / Tumeltsham and the service providers (marketing agency, hosting partner, ERP software partner) commissioned by "ELMAG Entwicklungs und Handels GmbH", for the purpose of processing and answering my request. For more information, please see our privacy policy.

     

    Shipping duration display on product detail page:
    This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.