0 Products
Voltmeter, 3x ammeter and frequency meter with 3x400 volt changeover switch Voltmeter with switch, 3 ampere and 1 frequency meter (V+US,3xA,Hz)
€ 0,00
Not available at the moment or only on request!
Tandem road chassis 2700kg for generators Tandem-axle special chassis - up to 2700 kg maximum permissible weight. Total weight - maintenance-free rubber spring axles - overrun brakes - V-drawbar - rigid - welded all-steel C-profile design - completely hot-dip galvanised - 1 front support wheel KNOTT 250kg load capacity - lighting in accordance with STVO - multi-chamber lights with bulb technology - marker lights, number plate lights and position lights with rubber bracket in LED - 7 or 13-pin plug - 4 lifting eyes mounted at the corners - light bar width equal to wheel arch width - incl. mounting of the power generator - type-approved
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Automatic refuelling device using large external tank installed in the standard tank of the power generator for SEDSSF series devices
€ 3.678,00
€ 3.678,00
Incl. Tax
€ 3.065,00
Excl. Tax
Not available at the moment or only on request!
Road chassis 1300kg for generator 1-axle special chassis - up to 1300 kg maximum permissible weight Total weight - maintenance-free rubber spring axle - overrun brakes - V-drawbar - welded all-steel design - completely hot-dip galvanised - 1 front support wheel - lighting according to STVO - 7 or 13-pin plug - incl. 2 rear push supports - incl. mounting of the generator - type-approved
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Height adjustable drawbar KHD 35 at extra cost for tandem road chassis - up to 3500 kg maximum permissible weight Total weight - with quick crank height adjustment - overrun brakes - with interchangeable ball coupling and lorry towing eye
€ 0,00
excluding shipping costs
available again from week no. 13/2026
Height adjustable drawbar KHD 27 at extra cost for tandem road chassis - up to 2700 kg maximum permissible weight Total weight - with quick crank height adjustment - overrun brakes - with interchangeable ball coupling and lorry towing eye
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Three-way valve with quick couplings for connection of an external fuel tank
€ 1.128,00
€ 1.128,00
Incl. Tax
€ 940,00
Excl. Tax
Not available at the moment or only on request!
Automatic load transfer switch 63 A - 4-pin Type ABB OTM with integrated mains and generator monitoring and remote start output for generators, for top-hat rail mounting, auxiliary contacts and busbar optionally available on the outgoing side
€ 1.572,00
€ 1.572,00
Incl. Tax
€ 1.310,00
Excl. Tax
In stock, immediately available
Motorised load transfer switch 400A - 4-pin Type ABB OTM400E4CM230C for automatic switching mains-0-emergency power with actuation via external control system (e.g. generator controller, PLC, ...), motorised drive must have external supply (optional ODPSE230C dual power supply unit)
€ 3.906,00
€ 3.906,00
Incl. Tax
€ 3.255,00
Excl. Tax
In stock, immediately available
Electric cooling water preheater - 230 volts for SEDSSF series devices
€ 1.162,80
€ 1.162,80
Incl. Tax
€ 969,00
Excl. Tax
Not available at the moment or only on request!
Automatic load transfer switch 125 A - 4-pin Type ABB OTM with integrated mains and generator monitoring and remote start output for generators, for top-hat rail mounting, auxiliary contacts and busbar optionally available on the outgoing side
€ 1.884,00
€ 1.884,00
Incl. Tax
€ 1.570,00
Excl. Tax
In stock, immediately available
2 swivel crank supports at additional cost for road chassis up to 3500kg - standard push-pull props not required
€ 0,00
excluding shipping costs
available again from week no. 9/2026
Large external tank 1000 litres 'double-walled' with basic pack for connecting to power generator with level indicator, leakage indicator, etc.
€ 2.424,00
€ 2.424,00
Incl. Tax
€ 2.020,00
Excl. Tax
Not available at the moment or only on request!
Earth spike 1 metre, earth cable 4 meters, cross section 16 mm
€ 128,40
€ 128,40
Incl. Tax
€ 107,00
Excl. Tax
Residual amounts available
Electric cooling water preheater 230 volt for generators with KUBOTA engine and SEDSS ECO series
€ 1.011,60
€ 1.011,60
Incl. Tax
€ 843,00
Excl. Tax
Not available at the moment or only on request!
Parallel cable for inverter generator suitable for SEBSS 3000Wi (for connecting 2 devices of type SEBSS 3000Wi)
€ 301,20
€ 301,20
Incl. Tax
€ 251,00
Excl. Tax
In stock, immediately available
Oil drain pump for SEBSS/SEDSS with air-cooled Engine 3000 rpm
€ 585,60
€ 585,60
Incl. Tax
€ 488,00
Excl. Tax
In stock, immediately available
Parallel cable for inverter generator suitable for SEBSS 2000Wi (for connecting 2 devices of type SEBSS 2000Wi)
€ 97,80
€ 97,80
Incl. Tax
€ 81,50
Excl. Tax
In stock, immediately available
Covering hood for inverter generator suitable for SEBSS 3000Wi
€ 85,20
€ 85,20
Incl. Tax
€ 71,00
Excl. Tax
In stock, immediately available
Oil filler plug with “high-performance magnet” suitable for SEBSS 3000Wi
€ 82,80
€ 82,80
Incl. Tax
€ 69,00
Excl. Tax
In stock, immediately available
Tandem road chassis 3000kg for generator Tandem-axle special chassis - up to 3000 kg maximum permissible weight. Total weight - maintenance-free rubber spring axles - overrun brakes - V-drawbar - rigid - welded all-steel C-profile design - completely hot-dip galvanised - 1 front support wheel KNOTT 250kg load capacity - lighting in accordance with STVO - multi-chamber lights with bulb technology - marker lights, number plate lights and position lights with rubber bracket in LED - 7 or 13-pin plug - 4 lifting eyes mounted at the corners - light bar width equal to wheel arch width - incl. mounting of the power generator - type-approved
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Road chassis 1500kg for generator 1-axle special chassis - up to 1500 kg maximum permissible weight Total weight - maintenance-free rubber spring axle - overrun brakes - V-drawbar - welded all-steel design - completely hot-dip galvanised - 1 front support wheel - lighting according to STVO - 7 or 13-pin plug - incl. 2 rear push supports - incl. mounting of the generator - type-approved
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Pipe clamp 42mm for flex. Exhaust pipe (AD: 42mm/ID: 38mm)
€ 6,00
€ 6,00
Incl. Tax
€ 5,00
Excl. Tax
excluding shipping costs
In stock, immediately available
Road chassis 1800kg for generator 1-axle special chassis - up to 1800 kg maximum permissible weight Total weight - maintenance-free rubber spring axle - overrun brakes - V-drawbar - welded all-steel design - completely hot-dip galvanised - 1 front support wheel - lighting according to STVO - 7 or 13-pin plug - incl. 2 rear push supports - incl. mounting of the generator - type-approved
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Tandem road chassis 2000kg for power generator Tandem-axle special chassis - up to 2000 kg maximum permissible weight. Total weight - maintenance-free rubber suspension axles - overrun brakes - V drawbar - rigid - welded all-steel C-section design - completely hot-dip galvanised - 1 front jockey wheel KNOTT 250kg load capacity - lighting in accordance with STVO - multi-chamber lights with incandescent lamp technology - position lamps, number plate lights and position lamps with rubber bracket in LED - 7 or 13-pin plug - 4 lifting eyes mounted at the corners - light bar width equal to wheel arch width - incl. installation of the power generator - type-approved
€ 8.718,00
€ 8.718,00
Incl. Tax
€ 7.265,00
Excl. Tax
Not available at the moment or only on request!
Pipe clamp 38mm for flex. Exhaust pipe (ED: 38mm/ID: 35mm)
€ 6,00
€ 6,00
Incl. Tax
€ 5,00
Excl. Tax
excluding shipping costs
Not available at the moment or only on request!
Automatic refuelling device using large external tank installed in the standard tank of the power generator for SEDSS units with Kubota diesel engine
€ 2.280,00
€ 2.280,00
Incl. Tax
€ 1.900,00
Excl. Tax
Not available at the moment or only on request!
Road chassis 750kg for generator 1-axle special chassis - up to 750 kg maximum permissible weight Total weight - maintenance-free rubber spring axle - 175/70R13 tyres - unbraked - straight drawbar - welded all-steel design - completely hot-dip galvanised - 1 support wheel at the front - lighting in accordance with STVO - 7 or 13-pin plug - incl. mounting of the power generator - type-approved
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Height adjustable drawbar KHD 20 at extra cost for tandem road chassis - up to 2000 kg maximum permissible weight Total weight - with quick crank height adjustment - overrun brakes - with interchangeable ball coupling and lorry towing eye
€ 0,00
excluding shipping costs
Not available at the moment or only on request!
Motorised load transfer switch 125A - 4-pin Type ABB OTM125F4CMA230V for automatic switching mains-0-emergency power with actuation via external control system (e.g. generator controller, PLC, ...), motorised drive must have external supply (optional ODPSE230C dual power supply unit)
€ 1.752,00
€ 1.752,00
Incl. Tax
€ 1.460,00
Excl. Tax
Residual amounts available
Motorised load transfer switch 630A - 4-pin Type ABB OTM630E4CM230C for automatic switching mains-0-emergency power with actuation via external control system (e.g. Generator control, PLC, ...), motorised drive must be supplied via external (optional dual power supply unit ODPSE230C)
€ 0,00
In stock, immediately available
Motorised load transfer switch 800A - 4-pin Type ABB OTM800E4CM230C for automatic mains-0-emergency power changeover by activation via external control (e.g. Generator control, PLC, ...), motorised drive must be supplied via external (optional dual power supply unit ODPSE230C)
€ 0,00
Not available at the moment or only on request!
Motorised load transfer switch 1600A - 4-pin Type ABB OTM1600E4CM230C for automatic switching mains-0-emergency power with actuation via external control system (e.g. Generator control, PLC, ...), motorised drive must be supplied via external (optional dual power supply unit ODPSE230C)
€ 0,00
Not available at the moment or only on request!
Oil filler plug with “high-performance magnet” suitable for SEBSS 2000Wi
€ 70,80
€ 70,80
Incl. Tax
€ 59,00
Excl. Tax
In stock, immediately available
Covering hood for inverter generator suitable for SEBSS 2000Wi
€ 75,60
€ 75,60
Incl. Tax
€ 63,00
Excl. Tax
In stock, immediately available
Oil filler neck (filling aid) suitable for SEBSS 2000Wi
€ 26,40
€ 26,40
Incl. Tax
€ 22,00
Excl. Tax
In stock, immediately available
Trickle charger DSE 9150 for generator with 12Volt battery voltage (built-in)
€ 532,80
€ 532,80
Incl. Tax
€ 444,00
Excl. Tax
Not available at the moment or only on request!
Replacement tank 20 litres with diesel pump 12V for SED series diesel generators with electric start
€ 1.836,00
€ 1.836,00
Incl. Tax
€ 1.530,00
Excl. Tax
Not available at the moment or only on request!
Voltage monitoring (loose) RTE for PTO gen. SEZ/SEZN models
- Protection against overvoltage and undervoltage
- Protection against overvoltage and undervoltage
€ 630,00
€ 630,00
Incl. Tax
€ 525,00
Excl. Tax
In stock, immediately available
Replacement tank 20 litres with diaphragm pump and holder for generators with HONDA GX 270/390 engine
€ 1.011,60
€ 1.011,60
Incl. Tax
€ 843,00
Excl. Tax
Not available at the moment or only on request!
Tank connection preparation for power generator SEDSS, 3 holes in battery cover area 1x for flow 1x for return (diesel only) and 1x for cable to external pump, standard tank not connected, flow and return line as well as cable 3x2,5mm2 with 5 meter
€ 290,40
€ 290,40
Incl. Tax
€ 242,00
Excl. Tax
Not available at the moment or only on request!
Diesel pump 12 volt for generator for generators with E-start, pump type Hardi or Hüco, reinforced
€ 820,80
€ 820,80
Incl. Tax
€ 684,00
Excl. Tax
In stock, immediately available
Residual current circuit breaker (universal current-sensitive) 30mA, type B, 63A for generators up to 40kVA
€ 2.412,00
€ 2.412,00
Incl. Tax
€ 2.010,00
Excl. Tax
Not available at the moment or only on request!
RCCB 30mA for power generator 230 volt - type A
€ 522,00
€ 522,00
Incl. Tax
€ 435,00
Excl. Tax
Not available at the moment or only on request!
RCCB (all-current sensitive) 30mA, type B, 40A for generators up to 24kVA
€ 1.302,00
€ 1.302,00
Incl. Tax
€ 1.085,00
Excl. Tax
Not available at the moment or only on request!
RCCB 30mA for power generator 400 Volt - type A
€ 585,60
€ 585,60
Incl. Tax
€ 488,00
Excl. Tax
Not available at the moment or only on request!
Surcharge for control panel in accordance with DGUV 203-032 version B for generators series BASIC SEB and SED 230Volt - includes tmcb for 1st outlet and tmcb/rcd 30mA for 2nd outlet - mounted in plastic box on the side next to the generator
€ 594,00
€ 594,00
Incl. Tax
€ 495,00
Excl. Tax
Not available at the moment or only on request!
Aufpreis: Schalttafelausführung nach DGUV 203-032 Ausführung B for power generator SEDSS 183WDE with basic version or versions V2-V3-V4, with 1x TMSS C 400V, 1x LSFI 30mA 400V, 2x LSFI 30mA 230V, modified socket configuration as follows: 1x CEE32A400V, 1x CEE16A400V, 2x safety plug 230V - mounted instead of standard version. (star point isolated)
€ 1.128,00
€ 1.128,00
Incl. Tax
€ 940,00
Excl. Tax
Not available at the moment or only on request!
Surcharge: control panel version in accordance with DGUV 203-032 version B for power generator SEDSS 113/133WDE with basic version or version-V2, with 1x TMSS C 400V, 2x LSFI 30mA 230V - mounted instead of standard version.
€ 894,00
€ 894,00
Incl. Tax
€ 745,00
Excl. Tax
Not available at the moment or only on request!
Motorised load transfer switch 250 A - 4-pin Model ABB OTM250E4CM230C for automatic switching mains-0-emergency power with actuation via external control system (e.g. generator controller, PLC, ...), motorised drive must have external supply (optional ODPSE230C dual power supply unit)
€ 3.210,00
€ 3.210,00
Incl. Tax
€ 2.675,00
Excl. Tax
In stock, immediately available



































