Plasma inverter CEBORA PLASMA iQC 130/T Item 603 Includes CP180C MAR/6m burner with Esafast® adapter (item no. 2020) and 6m ground cable
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
€ 8.448,00
€ 8.448,00
Incl. Tax
€ 7.040,00
Excl. Tax
In stock
SKU
- Control panel with high-resolution 4.3' color LCD display
- Synergistic adjustment of cutting parameters
- Display of the number and duration of ignitions and the total cutting time
- Automatic detection of burner model, type, and length via hardware key
- Color graphic display of the consumables set used
- “Functions: ”Fast Restart/Self Restart“ (for continuous cutting of metal grids without extinguishing the pilot arc) and ”Spot.'
Operating modes:
- Flame cutting: air and nitrogen N2
- Marking with gas: air (up to 5 A)
- Gouging (maximum removal rate: 12,2 kg/h)' - New CEBORA CP180C burner (Art. 2020 - 2021), which must be connected to the power source with lengths of 6 and 15 meters (MAR and DAR) using an ESAFast® adapter. ESAFast® is the new 11-pin central adapter with a pleasant and compact hexagonal design, from which it draws its inspiration.
- Option to update the software via USB stick
- Power source for motor generators with a capacity corresponding to 1.5 times the generator capacity, even if it is not equipped with an AVR (automatic voltage regulator)
- “Plasma Synergy” kit with automatic pressure regulator (item 503)
Ideal solution for a fully automatic plasma cutting system suitable for all materials and working conditions, enabling
- Real-time gas regulation and control
- Automatic management of cutting, marking, gouging, and gouging processes
- Automatic adjustment of cutting parameters based solely on material and thickness' - With CEBORA “On-Air” ignition system
- DC constant source with PFC (compliant with EN 61000-3-12)
- Reduced power consumption, high mains power tolerance
- Manual operation with plasma torch package CP180C MAR
- Automatic operation with CP 180C DAR plasma torch package and interface circuit (special accessory)
- Can be operated with a power generator (min. 33 kVA)
available again from week no. 2/2027
Article Number: 56804
|
EAN: 9004853568046
Now included for a short time free of charge:
recommendet cutting strength steal: 0 - 40 mm
Downloads
- Control panel with high-resolution 4.3' color LCD display
- Synergistic adjustment of cutting parameters
- Display of the number and duration of ignitions and the total cutting time
- Automatic detection of burner model, type, and length via hardware key
- Color graphic display of the consumables set used
- “Functions: ”Fast Restart/Self Restart“ (for continuous cutting of metal grids without extinguishing the pilot arc) and ”Spot.'
Operating modes:
- Flame cutting: air and nitrogen N2
- Marking with gas: air (up to 5 A)
- Gouging (maximum removal rate: 12,2 kg/h)' - New CEBORA CP180C burner (Art. 2020 - 2021), which must be connected to the power source with lengths of 6 and 15 meters (MAR and DAR) using an ESAFast® adapter. ESAFast® is the new 11-pin central adapter with a pleasant and compact hexagonal design, from which it draws its inspiration.
- Option to update the software via USB stick
- Power source for motor generators with a capacity corresponding to 1.5 times the generator capacity, even if it is not equipped with an AVR (automatic voltage regulator)
- “Plasma Synergy” kit with automatic pressure regulator (item 503)
Ideal solution for a fully automatic plasma cutting system suitable for all materials and working conditions, enabling
- Real-time gas regulation and control
- Automatic management of cutting, marking, gouging, and gouging processes
- Automatic adjustment of cutting parameters based solely on material and thickness' - With CEBORA “On-Air” ignition system
- DC constant source with PFC (compliant with EN 61000-3-12)
- Reduced power consumption, high mains power tolerance
- Manual operation with plasma torch package CP180C MAR
- Automatic operation with CP 180C DAR plasma torch package and interface circuit (special accessory)
- Can be operated with a power generator (min. 33 kVA)
Advantages
- Control panel with high-resolution 4.3' color LCD display
- Synergistic adjustment of cutting parameters
- Display of the number and duration of ignitions and the total cutting time
- Automatic detection of burner model, type, and length via hardware key
- Color graphic display of the consumables set used
- “Functions: ”Fast Restart/Self Restart“ (for continuous cutting of metal grids without extinguishing the pilot arc) and ”Spot.'
Operating modes:
- Flame cutting: air and nitrogen N2
- Marking with gas: air (up to 5 A)
- Gouging (maximum removal rate: 12,2 kg/h)' - New CEBORA CP180C burner (Art. 2020 - 2021), which must be connected to the power source with lengths of 6 and 15 meters (MAR and DAR) using an ESAFast® adapter. ESAFast® is the new 11-pin central adapter with a pleasant and compact hexagonal design, from which it draws its inspiration.
- Option to update the software via USB stick
- Power source for motor generators with a capacity corresponding to 1.5 times the generator capacity, even if it is not equipped with an AVR (automatic voltage regulator)
- “Plasma Synergy” kit with automatic pressure regulator (item 503)
Ideal solution for a fully automatic plasma cutting system suitable for all materials and working conditions, enabling
- Real-time gas regulation and control
- Automatic management of cutting, marking, gouging, and gouging processes
- Automatic adjustment of cutting parameters based solely on material and thickness' - With CEBORA “On-Air” ignition system
- DC constant source with PFC (compliant with EN 61000-3-12)
- Reduced power consumption, high mains power tolerance
- Manual operation with plasma torch package CP180C MAR
- Automatic operation with CP 180C DAR plasma torch package and interface circuit (special accessory)
- Can be operated with a power generator (min. 33 kVA)
Specifications
| recommendet cutting strength steal | 0 - 40 mm |
| separating cut steal | 60 mm |
| cutting current setting | 10 - 130 A |
| electrical cutting current regulation | stufenlos |
| 100 % welding power source (10 min. at 40 °C) at cutting current | 130 A |
| duty cycle at max. welding power | 100 / 130 % / A |
| input power l1 max. / l1 eff. | 32 / 32 A |
| voltage / phases | 208 - 440 / 3 V / ~ |
| Mains frequency | 50/60 Hz |
| power tolerance | +/- 10 % |
| anti-surge fuse | 32 AT |
| Degree of protection | 23S IP |
| connector | CEE 32 A |
| compressed air consumption | 295 l/min |
| Operational pressure | 6 bar |
| Width | 316 mm |
| Depth | 708 mm |
| Height | 555 mm |
| Weight | 50 kg |
| Type | 603 |
Substitute
This article could be an alternative for you:
Downloads
Special pre-filter set for plasma cutting systems Separation efficiency up to max. 0.3µm,
consisting of:
Prefilter 'FUTURA' art. no. 42506 Differential
pressure indicator art. no. 9402207
Double nipple AG 1/4' x AG 1/4' separable
art. no. 42395
Plug nipple AG 1/4'
art. no. 42320
€ 190,80
€ 190,80
Incl. Tax
€ 159,00
Excl. Tax
In stock, immediately available
Compass set complete with guide carriage for burner CP161/CP162C/CP180C MAR, Art. 407
€ 262,80
€ 262,80
Incl. Tax
€ 219,00
Excl. Tax
Residual amounts available
Guide carriage, loose, for burners CP161/CP162C/CP180C MAR, item no. 406
€ 118,80
€ 118,80
Incl. Tax
€ 99,00
Excl. Tax
excluding shipping costs
In stock, immediately available
Transport trolley with 4 wheels art. 1677 suitable for PLASMA iQC 70/110/130/T
€ 432,00
€ 432,00
Incl. Tax
€ 360,00
Excl. Tax
available again from week no. 2/2027
Nozzle holder for CP180C burner, item no. 2914
€ 90,00
€ 90,00
Incl. Tax
€ 75,00
Excl. Tax
excluding shipping costs
In stock, immediately available
Nozzles 0.8 mm (5 pcs/pack), item no. 2743 for burner CP180C (max. 40A)
€ 56,40
€ 56,40
Incl. Tax
€ 47,00
Excl. Tax
excluding shipping costs
In stock, immediately available
Nozzles 1.35 mm (5 pcs/pack), item no. 2732 for burner CP180C (max. 70A)
€ 56,40
€ 56,40
Incl. Tax
€ 47,00
Excl. Tax
excluding shipping costs
In stock, immediately available
Nozzles 1.50 mm (5 pcs/pack), item no. 2733 for burner CP180C (max. 110A)
€ 56,40
€ 56,40
Incl. Tax
€ 47,00
Excl. Tax
excluding shipping costs
In stock, immediately available
Nozzles 1.65 mm (5 pcs/pack), item no. 2734 for burner CP180C (max. 130A)
€ 56,40
€ 56,40
Incl. Tax
€ 47,00
Excl. Tax
excluding shipping costs
In stock, immediately available
Nozzles 3.00 mm (5 pcs/pack), item no. 2744 for burner CP180C, for gouging
€ 56,40
€ 56,40
Incl. Tax
€ 47,00
Excl. Tax
excluding shipping costs
In stock, immediately available
Nozzle protective shield for CP180C MAR, Item 2971
€ 68,40
€ 68,40
Incl. Tax
€ 57,00
Excl. Tax
excluding shipping costs
In stock, immediately available
Diffuser for burner CP162C/180C Art. 1979
€ 63,00
€ 63,00
Incl. Tax
€ 52,50
Excl. Tax
excluding shipping costs
In stock, immediately available
Electrodes for burner CP180C (max. 130A), Art. 2372 (5 pcs./Pkg.)
€ 60,00
€ 60,00
Incl. Tax
€ 50,00
Excl. Tax
excluding shipping costs
In stock, immediately available
O-rings for burners CP160/161/162C/180C (5 pcs./Pkg.), Art. 1398
€ 6,60
€ 6,60
Incl. Tax
€ 5,50
Excl. Tax
excluding shipping costs
In stock, immediately available
Brass diffuser for burner CP180C, , Art. 1613 (5 pcs./Pkg.)
€ 48,00
€ 48,00
Incl. Tax
€ 40,00
Excl. Tax
excluding shipping costs
In stock, immediately available
JETZT BIS ZU 24 MONATE GARANTIE BEANTRAGEN!
Dazu einfach bis 15 Tage nach Kaufdatum unter https://welding.cebora.it/de/assistance/register-your-product registrieren.
CEBORA-Seriennr.:
€ 5.142,00
€ 5.142,00
Incl. Tax
€ 4.285,00
Excl. Tax
In stock, immediately available
APPLY NOW FOR UP TO A 24-MONTH WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of the purchase date.
CEBORA serial no.:
€ 3.348,00
€ 3.348,00
Incl. Tax
€ 2.790,00
Excl. Tax
In stock, immediately available
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
€ 6.342,00
€ 6.342,00
Incl. Tax
€ 5.285,00
Excl. Tax
In stock, immediately available
This article includes the ELMAG START-UP SERVICE.
Further information can be found HERE or at elmag.at/startupservice
Shipping duration display on product detail page:
This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.
