COVID-19 FAQ

Multifunction welding inverter, - STEEL ALUMINUM SET
Mod. ETP 220 SynPuls - STEEL ALU SET
MAG SG2 (1.5125) + MIG AlSi5 (3.2245)
consisting of:
1 pc. ETP 220 SynPuls art. no. 00360
incl. electrode holder cable 25mm²/4m,
Plug 16/25mm², earth cable 25mm²/3m, plug 16/25mm², pressure regulator with 2 gauges,
3.5m carbon PTFE core, 2 pcs. each, feed rollers for
0.6/0.8 mm & 1.0/1.2 f. Fe/CrNi/CuSi, TS & 0.8/1.0 Alu, HA, hose set orig. BINZEL MB 25/3m
1 rll. Welding wire 0.8mm / 5 kg SG2
Art. no. 54152
1 pc. steel cylinder mixed gas 20 lt. filled
Art. no. 54202
UN 1956 compressed gas, n.o.s.
(argon+carbon dioxide), Class 2, ADR
*Carriage without exceeding the exemption limits set in sub-section 1.1.3.6
1 pc. hose package orig. BINZEL MB EVO 25/3m aluminium
Art. no. 59326
1 rll. ALU welding wire 1.0mm / 2 kg AlSi 5
Art. no. 54144
1 pc. steel cylinder argon 20 lt. filled
Art. no. 54242
UN 1006 argon, compressed, Class 2, ADR *Carriage without exceeding the exemption limits specified in sub-section 1.1.3.6.
NOTE: Single-phase/32 amp mains connection required. Before installation, clarify the
local conditions with your power supply company!

Article Number: 00380
EAN Code: 9004853003806
 
Immediately ready for shipment. Delivery time 1-2 days within AT and 2-3 days to DE
Normal-Price
(Incl. Tax):
€3,438.00
-16%
 

Excl. Tax: €2,455.00 Incl. Tax: €2,946.00

excl. Shipping Cost

Product Highlights

You will find more details about Multifunction welding machines ETP SynPuls here: Multifunction welding machines ETP SynPuls

Technical Facts

  • MIG/MAG synergy programs and functions:
    19 optimised MIG / MAG synergy programs, easy selection
    by material type, gas type and wire diameter
    - Normal, SYN or PULSED 2 or 4-stroke
    modes, spot welding time 0 - 10 s, no gas/cored wire welding
    - MOTOR SLOPE: soft start wire feed 0 - 1.5 s
    - ARC CONTROL: arc suppression 0 - 11 (inductance)
    - BBT: wire burn-back 1 - 10
    - POST GAS: gas post-flow time 0 - 5 s
    - 4-stroke: END POWER 30 - 100%, 0.2 - 2 s for crater filling

    TIG functions:
    - LIFT TIG ignition function
    - Normal or TIG IMPULSE, 2- or 4-stroke modes:
    - 4-stroke: PULSE FREQ 20 - 250 Hz, TIG BALANCE 20 - 80%,
    TIG 2-VALUE, SLOPE UP/DOWN 0 - 10/20 s,
    END POWER 5 - 200 A, POST GAS 0 - 5 s

    MMA functions:
    - HOT START + and ANTI STICK
    - Microprocessor control with 3.3’ digital display
    - VRD: Energy-saving device with low no-load voltage
    - GEN POWER: Operation by means of current generator possible

Substitute

This article could be an alternative for you:
00385 - Multifunction welding inverter, mobile - STEEL-ALUMINUM SET Mod. ETP 225 SynPuls - STEEL ALU SET
MAG SG2 (1.5125) + MIG AlSi5 (3.2245)
consisting of:
1 pc. ETP 225 SynPuls art. no. 00365
incl. electrode holder cable 25mm²/4m,
Plug 16/25mm², earth cable 25mm²/3m, plug 16/25mm², pressure regulator with 2 gauges,
3.5m carbon PTFE core, 2 pcs. each, feed rollers for
0.6/0.8 mm & 1.0/1.2 f. Fe/CrNi/CuSi, TS & 0.8/1.0 Alu, HA, hose set orig. BINZEL MB 25/3m
1 rll. Welding wire 0.8mm / 15 kg SG2
Art. no. 54162
1 pc. steel cylinder mixed gas 20 lt. filled
Art. no. 54202
UN 1956 compressed gas, n.o.s.
(argon+carbon dioxide), Class 2, ADR
*Carriage without exceeding the exemption limits set in sub-section 1.1.3.6
1 pc. hose package orig. BINZEL MB EVO 25/3m aluminium
Art. no. 59326
1 rll. ALU welding wire 1.0mm / 7 kg AlSi 5
Art. no. 54147
1 pc. steel cylinder argon 20 lt. filled
Art. no. 54242
UN 1006 argon, compressed, Class 2, ADR *Carriage without exceeding the exemption limits specified in sub-section 1.1.3.6.
NOTE: Single-phase/32 amp mains connection required. Before installation, clarify the
local conditions with your power supply company!

Specifications

Material thickness
0,5 - 8 mm
steel wire diameter
MIG/MAG 0.6 - 1.0 mm
stainless steel wire diameter
MIG/MAG 0.8 - 1.0 mm
aluminium wire diameter
MIG/MAG 0.8 - 1.2 mm
hard braze wire diameter
MIG/MAG 0.8 - 1.0 mm
cored wire diameter
MIG/MAG 0.8 - 1.0 mm
welding wire roll diameter
MIG/MAG 100/200 mm
welding wire roll weight
MIG/MAG 5 kg
welding electrodes diameter
MMA 1.6 - 4.0 mm
welding current setting
MIG/MAG 20-200 A / TIG DC 5-200 A / MMA 5-200 A
electrical welding current regulation
continuously variable
100 % welding power source (10 min. at 40 °C) at welding current
MIG/MAG 140 A / TIG DC 120 A / MMA 120 A
welding power source (10 min at 40 °C) at welding current
MIG/MAG 35/200 A / TIG DC 35/200 A / MMA 35/200
Open circuit voltage
MIG/MAG 35 V / TIG DC 65 V / MMA 65 V
mains connection / phases
230 / 1 V / ~
Mains frequency
50/60 Hz
power tolerance
± 10 %
anti-surge fuse
32 AT
thermal overload protection
Yes
insulation class
H
Degree of protection (IP)
22
input power l1 max. / l1 eff.
MIG/MAG 33/21 A / TIG DC 26.5/14.5 A / MMA 37.5/21.5 A
ground connection plug / cross-section
9 / 25 O / mm2
connector
230 V / CEE 32
Width
280 mm
Depth
500 mm
Height
420 mm
Weight
17 kg
feed drive
4 Rollers
Roland Ziegler
You have a question?
I am looking forward to helping you!
Please write an or call +43 7752 80881.

Product Manager
Roland Ziegler
Benefit from a 2-year ELMAG warranty
or extend it to 3 years by registering at
www.elmag.eu/3years

Quick enquiry


  • Attachments:

    jpg, gif, png, doc, docx, pdf / in total max. 10 MB upload allowed.

  • The data entered above is stored and processed by "ELMAG Entwicklungs und Handels GmbH", Hannesgrub Nord 19 - A-4911 Ried / Tumeltsham and the service providers (marketing agency, hosting partner, ERP software partner) commissioned by "ELMAG Entwicklungs und Handels GmbH", for the purpose of processing and answering my request.
    For more information, please see our Privacy Policy

* Required Fields

Other products

powered by quality. since 1984.
ELMAG Entwicklungs und Handels Gmbh
Hannesgrub Nord 19 - A-4911 Ried/Tumeltsham - - Phone +43 7752 80881 - Fax +43 7752 80880
Opening times: Mo-Fr 8:00-12:00 and 13:00–17:00