BOMAR metal bandsaw

  • PULLDOWN - manual metal bandsaw

    The large cutting range is designed for use in workshops and construction sites. With this portable machine, continuously adjustable cuts of 0° and
    mitre cuts up to 60° are possible. The saw feed is operated manually by pulling the hand guide lever.
  • EASYCUT - Manual metal bandsaw/Automatic metal bandsaw with manual mitre adjustment

    The EasyCut bandsaw has a wide range of uses. The manual
    gravity-operated bandsaw can be used in small to medium-sized companies thanks to its excellent cost-effectiveness. With extensive accessories, it is also possible to tailor a cutting unit for the customer.

    Automatic bandsaw with NC control. Following programming of the piece length and the number of pieces, the whole working cycle is carried out. The nominal length of the material to be cut is very easy to adjust on the control panel, which can be move to any position. The biggest advantage of this system is the option of programming different quantities of the material to
    be cut with different lengths, without having to adjust the system further. The feed vice mounted on the linear guides opens on both sides, avoiding collisions with uneven material. The minimum size of the remaining piece in automatic mode is 180 mm. The basic features of the system include two saw blade speeds, namely 40 and 80 m/min.
  • EASYCUT - Universal metal bandsaw

    EasyCut 275.230 DG is a universal gravity bandsaw with robust cast iron frame and a saw band with a height of 27 mm. Accurate guidance of the bandsaw blade, a saw frame joint positioned in prestressed tapered roller bearings and synchronised brushes for chip removal are an excellent basis for effective performance of the system and a long service life for the saw band. The pressure during cutting is applied by the weight of the saw frame. The lowering speed of the saw frame is continuously controlled by a hydraulic cylinder with overflow valve. After cutting the material and switching the saw blade off, the saw frame can be raised manually. The saw blade is driven by an industrial two-speed drive with worm gear.
  • ERGONOMIC - Manual/semi-automatic metal bandsaw

    Universal bandsaw with sturdy cast metal frame and 27 mm saw band. The precise carbide guide of the saw band, in
    pre-tensioned tapered roller bearings in the saw frame and synchronized brushes for chip removal are prerequisites for
    excellent cutting performance. The saw blade is powered by an industrial drive with frequency converter and helical gearbox in an oil bath.
  • WORKLINE - Straight cut with bite

    The WORKLINE series is the practical solution for the workshop whenever straight cuts are required. Thanks to simple yet convenient operation, the WORKLINE series saws are the ideal solution for your sawing requirements. Accurate carbide guide of the saw band, arm joint mounted in slide bearings, 27/34 mm high bandsaw blade and synchronously operating brush for chip removal are a prerequisite for excellent machine performance. The essential features of this machine include a frequency converter that adjusts the optimum speed of the saw blade in relation to the material to be cut in the range 20-120 m/min. This significantly increases both the life of the bandsaw blades and the
    productivity of the machine.
  • PROLINE - Two-column guided, fully automatic machine

    The fully automatic two-column bandsaw is designed for cuts with a material O of 350 mm. The material feed, material intake and feed for the saw belt arm operate automatically by hydraulic power. Programming takes place in individual steps and the user has a clear overview on the graphical display. The material is held by full-stroke vices. The machine is equipped with a frequency converter which allows setting of the optimal speed of the saw blade for the material to be cut
BOMAR metal bandsaw
Thomas Kubinger
You have a question?
I am looking forward to helping you!
Please write an or call +43 7752 80881.

Product Manager
Thomas Kubinger
Benefit from a 2-year ELMAG warranty
or extend it to 3 years by registering at

Versions and variants

BOMAR metal bandsaw

Products 1 to 3 out of 3
Product 1 out of 3
BOMAR metal bandsaw
Article Number
EAN Code
Product filter



all products shown