Induction heater, portable iT 3.7K230 LCD EVO: including 3 m induction hose pack with lateral heating head
ATTENTION: The appliance must not be turned over during transportation!!!
Demo item
Item condition: Minor signs of wear
Incl. Tax: € 3.961,20 -20%
Now included for a short time free of charge:
Output power: 3.7 kW
Downloads
Specifications
| Output power | 3.7 kW |
| inductions-hose package length | 3 m |
| woriking frequency | 15 - 30 kHz |
| supply cable generator | 2.6 m |
| choosable heat power | 5 Stages |
| thermal overload protection | Yes |
| micropocessor controlled | Yes |
| liquid cooled | Yes |
| protection type | 21 IP |
| coolant tank | 2 l |
| voltage / phases | 230 / 1 V / ~ |
| Mains frequency | 50 / 60 Hz |
| dimensions lxbxh | 250x500x280 mm |
| Weight | 13 kg |
| anti-surge fuse | 16 AT |
Substitute
This article could be an alternative for you:
Downloads
Coolant LRA5, 5 lt. -20°C to +120°C for induction heaters
Induction heating head complete, Ø 20 mm, short for side heating of pipes or cylinders for HEAT CHAMP 3.5+5kW/iT 3.5K230 KB/iT 3.5K230 LCD/iT 3.7K230 LCD EVO/iT 4K230 KB/iT 4K230 LCD/iT 5K400 KB/iT 5K400 LCD/HDi 8K400 TC
Induction heating head complete Ø 30 mm - short for side heating of pipes or cylinders for HEAT CHAMP 3,5+5kW/iT 3.5K230 KB/iT 3.5K230 LCD/iT 3.7K230 LCD EVO/iT 4K230 KB/iT 4K230 LCD/iT 5K400 KB/iT 5K400 LCD/HDi 8K400 TC
Induction heating head complete Ø 40 mm - short for side heating of pipes or cylinders for HEAT CHAMP 3,5+5kW/iT 3.5K230 KB/iT 3.5K230 LCD/iT 3.7K230 LCD EVO/iT 4K230 KB/iT 4K230 LCD/iT 5K400 KB/iT 5K400 LCD/HDi 8K400 TC
Induction heating head complete Ø 50 mm - short for side heating of pipes or cylinders for HEAT CHAMP 3,5+5kW/iT 3.5K230 KB/iT 3.5K230 LCD/iT 3.7K230 LCD EVO/iT 4K230 KB/iT 4K230 LCD/iT 5K400 KB/iT 5K400 LCD/HDi 8K400 TC
Induction heating head complete Ø 60 mm - short for side heating of pipes or cylinders for HEAT CHAMP 3,5+5kW/iT 3.5K230 KB/iT 3.5K230 LCD/iT 3.7K230 LCD EVO/iT 4K230 KB/iT 4K230 LCD/iT 5K400 KB/iT 5K400 LCD/HDi 8K400 TC
Induction heating head complete Ø 70 mm - short for side heating of pipes or cylinders for HEAT CHAMP 3,5+5kW/iT 3.5K230 KB/iT 3.5K230 LCD/iT 3.7K230 LCD EVO/iT 4K230 KB/iT 4K230 LCD/iT 5K400 KB/iT 5K400 LCD/HDi 8K400 TC
Induction heating head complete Ø 80 mm - short for side heating of pipes or cylinders for HEAT CHAMP 3,5+5kW/iT 3.5K230 KB/iT 3.5K230 LCD/iT 3.7K230 LCD EVO/iT 4K230 KB/iT 4K230 LCD/iT 5K400 KB/iT 5K400 LCD/HDi 8K400 TC
Induction heating head complete Ø 80 mm - short for side heating of pipes or cylinders for HEAT CHAMP 3,5+5kW/iT 3.5K230 KB/iT 3.5K230 LCD/iT 3.7K230 LCD EVO/iT 4K230 KB/iT 4K230 LCD/iT 5K400 KB/iT 5K400 LCD/HDi 8K400 TC
Induction heating head complete Ø 90 mm - short for side heating of pipes or cylinders for HEAT CHAMP 3,5+5kW/iT 3.5K230 KB/iT 3.5K230 LCD/iT 3.7K230 LCD EVO/iT 4K230 KB/iT 4K230 LCD/iT 5K400 KB/iT 5K400 LCD/HDi 8K400 TC
Induction heating head complete Ø 100 mm - short for side heating of pipes or cylinders for HEAT CHAMP 3,5+5kW/iT 3.5K230 KB/iT 3.5K230 LCD/iT 3.7K230 LCD EVO/iT 4K230 KB/iT 4K230 LCD/iT 5K400 KB/iT 5K400 LCD/HDi 8K400 TC
Induction heating head - ferrite insert (version A) to Art. 58260 for side heating for HEAT CHAMP 3.5/5kW/iT 3.5K230 KB (only up to 02/2023 orig.)/iT 4K230 KB/iT 5K400 KB/HDi 8K400 TC
PVC cover for art. 58260 & 58261 (Vers. A) = Ferrite - Insert HEAT CHAMP 3.5/5kW/iT 3.5K230 KB (only until 02/2023 orig.)/iT 4K230 KB/iT 5K400 KB/HDi 8K400 TC
XL induction heating head complete for front heating for HEAT CHAMP 3.5/5kW/iT 3.5K230 KB/iT 4K230 KB/iT 5K400 KB/iT 6K400 LCD/HDi 8K400 TC
Induction heater head - ferrite - insert for art. 58262 for front heating for HEAT CHAMP 3.5/5kW/iT 3.5K230 KB/iT 4K230 KB/iT 5K400 KB/HDi 8K400 TC
Induction heating head L, complete for front heating for HEAT CHAMP 3.5/5kW/iT 3.5K230 KB/iT 4K230 KB/iT 5K400 KB/HDi 8K400 TC, for wheel nuts/wheel bolts or hard-to-reach places - DISCONTINUED ITEM!
Induction heating head - ferrite - insert for Art. 58252/58254/58280/58281 for front and angled heating for HEAT CHAMP 3.5/5/11/16kW/iT 3.5K230 KB/iT 4K230 KB/iT 5K400 KB/HDi 8K400TC/HDi 11K400 KB/HDi 13K400 TC/HDi 16K400 KB/HDi 16K400 TC, for wheel nuts/wheel bolts or hard-to-reach places
Induction heating head 'Heavy Duty' with round head complete for lateral heating for HEAT CHAMP 3.5/5kW/iT 3.5K230 KB/iT 4K230 KB/iT 5K400 KB/iT 6K400 LCD/HDi 8K400 TC / from delivery 03/2023 for iT 3.5K230 KB as standard!
Induction heating head - ferrites - insert 'round' for art. 59290 for lateral heating for HEAT CHAMP 3.5/5 kW/iT 3.5K230 KB/iT 4K230 KB/iT 5K400 KB/iT 6K400 LCD/HDi 8K400 TC as standard from delivery 03/2023 for iT 3.5K230 KB!
Induktionsheizkopf 'Heavy Duty' mit Rundkopf komplett for front heating for HEAT CHAMP 3.5/5kW/iT 3.5K230 KB/iT 4K230 KB/iT 5K400 KB/iT 6K400 LCD/HDi 8K400 TC, for wheel nuts/wheel bolts or hard-to-reach places
Induction heating head - ferrites - insert 'round' for art. 59292 for front heating for HEAT CHAMP 3.5/5kW/iT 3.5K230 KB/iT 4K230 KB/iT 5K400 KB/iT 6K400 LCD/HDi 8K400 TC
for Inoxliner DUO, ECO 2 & PRO (supplied without these devices) consisting of:
* i-serve workshop trolley
* Peristaltic pump
* Hose package 3m
* Handle with demand button
* Carbon-Fix iServe (NEW non-slip)
* High-performance carbon fibre brush M10 XL
* Electrolyte Special 5lt.
* Cold device plug 3m
Incl. Tax: € 1.314,00 -48%
Netzanschluss: 230 V, 60 Hz
Abmessung Transformator: 7 x 6 x 5 cm
Abmessung Schaltgriff: 2 x 3 x 13 cm
Gewicht: 0,2 kg
Incl. Tax: € 202,80 -62%
Incl. Tax: € 754,80 -21%
Incl. Tax: € 121,20 -51%
Incl. Tax: € 211,20 -25%
- water-cooled incl. cooling unit on transport trolley, external wire feeder WF-02 with 2 m intermediate hosepack, welding return cable 70 qmm/4 m with terminal, pressure regulator MAXY incl. 2 pressure gauges, wire feed rollers 0.9-1.0/1.2mm for steel !!! 30-400 amps, ED 50% at 400 amps, ED 100% at 370 amps, incl. 5 litres of coolant for torch cooling
(without hose package)
- Delivery from 2021 in original packaging. OTC blue no longer in ELMAG red!
Incl. Tax: € 10.381,20 -31%
Max extraction with arm 1,100 m³/h ~ 1.1 kW ~ 3x400 V
(Type 60 650 AT 101)
Unit incl. HEPA filter of filter class H13, corresponds in Austria to the handling of carcinogenic substances under GKV 2011, Section 15
Included:
1x Profi-Master 60650AT, 7910301 support frame with hose, 7910302 slewing ring, 7910300 suction hood
Incl. Tax: € 3.655,80 -30%
Absaugarm Ø 150mm in Schlauchausführung,
Absaugl. mit Arm max. 950 m³/h ~ 1,1 kW ~ 1x230 V
(Type 64 330)
Lieferumfang:
Je 1x Smart-Master 6433001, 7910301 Tragegestell mit Schlauch, Drehkranz & Absaughaube bei Smart-Master beigepackt!
Incl. Tax: € 2.449,20 -25%
(suitable for generator)
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
Incl. Tax: € 2.530,44 -17%
1 pc. KING STAR 520 TS
Art. no.: 14709
1 pc. intermediate hose package 1.5m
Art. no.: 14725
1 pc. upgrade MIG pulse function
Art. no.: 14730
1 pc. upgrade MIG double pulse function
Art. no.: 14731
1 pc. upgrade SHS spatter reduction system
Art. no.: 14733
1 pc. WPS - Welding Procedure Specification art. no.: 14734
1 pc. router power supply unit
Art. no.: 14737
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
Incl. Tax: € 18.826,44 -45%
MIG/MAG (+Pulse),
complete with 2 pcs. hose package (1x MB 15/3m red, 1x MB 25/501/3m blue for aluminium), MIG-solder welding wire CuSi 3 0.8/2 kg., aluminium welding wire AlSi5 1.0/2 kg., ground cable 3m 25mm2 plug ø 9mm 16/25mm2 & 2 pcs. pressure reducer with 2 pressure gauges!
NOTE: Single-phase/32 amp mains connection required. Before installation, clarify the
local conditions with your power supply company!
Incl. Tax: € 3.720,00 -10%
Incl. Tax: € 879,84 -13%
Incl. Tax: € 1.290,00 -26%
(suitable for generator)
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
Incl. Tax: € 1.342,44 -18%
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
Incl. Tax: € 3.744,84 -15%
Incl. Tax: € 1.290,00 -26%
Incl. Tax: € 658,80 -27%
mobile, incl. main filter H14 - DIN EN ISO 1822 & pre-filter F7 - DIN EN ISO 16890 tested, constant volume flow control - independent of filter saturation, six air changes per hour up to 100 m², inlet opening 360° on all sides, presence sensor, volume flow 300 - 1500 m³/h ~ 0.75 kW ~ 1x230 V, sound pressure level at 1,200 m³/h - 49 dB(A), (type 390 701)
Incl. Tax: € 4.053,60 -70%
Incl. Tax: € 138,00 -60%
Incl. Tax: € 567,60 -60%
max. extraction with arm 1.100 m³/h ~ 1.5 kW ~ 3x400 V
(Type 64 650 101)
Incl. Tax: € 4.218,00 -10%
1 Stk. Zirkelset mit Führungswagen (56895)
9 Stk. Diffusor zu CP162C (56858)
9 Stk. Einzel-Düsen 1,35mm zu CP162C (56854)
14 Stk. Einzel-Düsen 1,5mm zu CP162C (56855)
4 Stk. Einzel-Elektroden zu CP162C (56859)
8 Stk. Düsen-Schutzschild für CP161/CP162C MAR (56851)
Incl. Tax: € 7.490,58 -40%
Incl. Tax: € 10.484,40 -20%
Incl. Tax: € 2.122,32 -30%
1 pc. IHZ 2250 Hand-held unit
1 pc. Ø 20mm / straight helix
1 pc. Ø 32mm / straight helix
1 pc. Ø 43mm / straight helix
1 pc. Flat induction coil
1 pc. Induction heating cable u-shaped
1 pc. Flexible induction cable L=1000mm
1 pc. Transport case
Incl. Tax: € 1.044,00 -32%
Incl. Tax: € 420,00 -60%
(10-pc. pack)
(10-pc. pack)
Discontinued item no longer available from CEBORA!
Replacement item = no. 55138 (piece reference)
This article includes the ELMAG START-UP SERVICE.
Further information can be found HERE or at elmag.at/startupservice
Shipping duration display on product detail page:
This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.
