Loading...

Hydraulic sheet metal shears Mod. HGD 3100x10mm
- CybTouch 8 controller
-hydr. kerf adjustment
- Back guard 1000mm
- Cut line illumination
- Safety light barrier 'rear'

€ 0,00
excluding shipping costs
In stock
SKU
  • High quality standards
  • Robust industrial models from state-of-the-art production
  • High cutting accuracy
  • Welded, very stable, tension-free monoblock
    Steel construction with excellent vibration damping
  • S275 material with very high tensile strength
  • High-quality BOSCH-REXROTH or HOERBIGEr hydraulic system
  • Low-noise ATOS hydraulic pumps with high pressure performance
  • Powerful hydraulic cylinders honed and chrome-plated
  • Upper blade with two cutting edges, hardened special steel
  • Lower blade with four cutting edges, hardened special steel
  • Central kerf adjustment for quality cuts of different material thicknesses and types
  • NC-controlled back gauge, precisely adjustable by motor with ball screw
  • High adjustment speed 110 mm/s, adjustment range 1,000 mm
  • Back gauge with automatic reset
  • Projection 350 mm for large special sizes
  • Cut line lighting
  • Automatic hold-down system with high holding force for support and tilting safety during the cutting phase
  • CE safety devices
  • Integrated safety with kerf cover
  • Light barrier on the back of the machine
  • Emergency stop button on the machine and on the operating column
Not available at the moment or only on request!
Article Number: 81362  |  EAN: 9004853813627

Shipping

Cut length: 3100 mm

  • High quality standards
  • Robust industrial models from state-of-the-art production
  • High cutting accuracy
  • Welded, very stable, tension-free monoblock
    Steel construction with excellent vibration damping
  • S275 material with very high tensile strength
  • High-quality BOSCH-REXROTH or HOERBIGEr hydraulic system
  • Low-noise ATOS hydraulic pumps with high pressure performance
  • Powerful hydraulic cylinders honed and chrome-plated
  • Upper blade with two cutting edges, hardened special steel
  • Lower blade with four cutting edges, hardened special steel
  • Central kerf adjustment for quality cuts of different material thicknesses and types
  • NC-controlled back gauge, precisely adjustable by motor with ball screw
  • High adjustment speed 110 mm/s, adjustment range 1,000 mm
  • Back gauge with automatic reset
  • Projection 350 mm for large special sizes
  • Cut line lighting
  • Automatic hold-down system with high holding force for support and tilting safety during the cutting phase
  • CE safety devices
  • Integrated safety with kerf cover
  • Light barrier on the back of the machine
  • Emergency stop button on the machine and on the operating column

Advantages

  • High quality standards
  • Robust industrial models from state-of-the-art production
  • High cutting accuracy
  • Welded, very stable, tension-free monoblock
    Steel construction with excellent vibration damping
  • S275 material with very high tensile strength
  • High-quality BOSCH-REXROTH or HOERBIGEr hydraulic system
  • Low-noise ATOS hydraulic pumps with high pressure performance
  • Powerful hydraulic cylinders honed and chrome-plated
  • Upper blade with two cutting edges, hardened special steel
  • Lower blade with four cutting edges, hardened special steel
  • Central kerf adjustment for quality cuts of different material thicknesses and types
  • NC-controlled back gauge, precisely adjustable by motor with ball screw
  • High adjustment speed 110 mm/s, adjustment range 1,000 mm
  • Back gauge with automatic reset
  • Projection 350 mm for large special sizes
  • Cut line lighting
  • Automatic hold-down system with high holding force for support and tilting safety during the cutting phase
  • CE safety devices
  • Integrated safety with kerf cover
  • Light barrier on the back of the machine
  • Emergency stop button on the machine and on the operating column

More Information

More Information
EAN-Number 9004853813627
No parcel service shipping Yes
Article Group "Special Programme" Yes
Product-Highlights
  • For coarse and fine work

    The HGD hydraulic swing beam shears are designed for precise heavy plate processing, but are equally suitable for medium and thin plates. With cutting thickness models up to 20 mm, they cover the needs of machine and steel construction companies.
  • High-quality materials

    HGD models are able to withstand the heaviest wear and tear over the long term, because the steel type S275 with increased ductility and tensile strength is used for the monoblock welded constructions of the machine body and the upper beam. High-alloy, ground special steel blades,
    German quality products offer a light, clean and straight cut.
  • Flat knife guide

    The large, precisely guided blade bar provides a shallow cutting angle. Sheet metal sections are precisely pre-tensioned and fully cut. Thin sheet remains straight and is cleanly cut.
  • Equipped with CybTouch

    Heavy cuts, easy programming. The newly integrated CybTouch cutting control with large colour touchscreen and visually impressive user guidance considerably simplifies machine set-up and operation.
  • Excellent features

    HGD sheet metal shears have excellent features as standard - e.g. with central kerf adjustment, NC-controlled back gauge, cutting line illumination etc.
  • Top accessories

    HGD models can be upgraded with automatic kerf and stroke adjustment (only with CNC control HGD). For further accessories, see overview.
  • HGD standard features

    - upper and lower blades for stainless steel processing
    - Hydraulic kerf adjustment
    - Upper blade with two cutting edges, special steel hardened
    - Hardened special steel lower blade with four cutting edges
    - Kerf adjustment device
    - NC-controlled back gauge with ball screw
    - Cutting line illumination
    - Automatic hold-down system
    - CE safety devices
    - Support arm with ruler and side stops
    - Supporting table with ball castors
    - HGD control console
    - HGD control console
    - Mobile operating column with foot release and emergency stop button
    - Operating instructions / CE
  • HGD special accessories

    - Angle stop with scale
    - Sheet metal holding device type 1 or type 2
    - Support length up to three metres, with ruler
    - Laser cutting line display
    - Finger protection light curtain
    - CNC HGD with CYBELEC DNC 61 G control
Substitute product 81363
Files
    ELMAG - Technical details AAA073f001 | 3100 | mm \ elmag_merk_485 | 10 | mm \ elmag_merk_487 | 6 | mm \ elmag_merk_488 | 0.05 - 1.3 | mm \ elmag_merk_227 | 13 | 1/min \ elmag_merk_489 | 14 | Num. \ elmag_merk_490 | 24 | t \ elmag_merk_491 | 22 | kW \ elmag_merk_492 | 0.75 | kW \ elmag_merk_486 | 1000 | mm \ elmag_merk_493 | 110 | mm/s \ EAB740f001 | 2 | ° \ AAA332f001 | 3480 | mm \ elmag_merk_1026 | 2 | Num. \ elmag_merk_1024 | 2500 | mm \ elmag_merk_1025 | 2270 | mm \ AAA462f001 | 350 | mm \ EAB076f001 | 900 | mm \ elmag_merk_507 | 260 | l \ AAA002f001 | 4050 | mm \ AAA040f001 | 3075 | mm \ AAA031f001 | 2175 | mm \ AAA003f001 | 10575 | kg \
    Low Stock Amount 0
    ELMAG goods group 6
    Filter-Category Maschinen/Geräte
    3 years warranty possible none
    Planned stock decrease 0
    Planned stock increase 0
    HNP/SP-Price € 0,00
    HNP/SP-Info Tier 1,0.00
    Previous URL Key hydraulic-sheet-metal-shears-81362

    Specifications

    Cut length 3100 mm
    cutting capacity 42 kg/mm² 10 mm
    cutting capacity 70 kg/mm² 6 mm
    kerf min. / max. 0.05 - 1.3 mm
    Stroke rate 13 1/min
    downholder 14 Num.
    downholder pressure 24 t
    main drive engine power 22 kW
    backgauge engine power 0.75 kW
    backgauge adjustment 1000 mm
    adjusting speed 110 mm/s
    Cutting angle 2 °
    Desk length 3480 mm
    support arms 2 Num.
    width without support arms 2500 mm
    transport width 2270 mm
    Overhang length 350 mm
    Desk height 900 mm
    oil tank volume 260 l
    Length 4050 mm
    Width 3075 mm
    Height 2175 mm
    Weight 10575 kg
    ALTERNATIVE PRODUCTS
    Motorised swivel bending machine Model MSTSM-S 2020x3.0 mm
    € 47.820,00
    € 47.820,00 Incl. Tax
    € 39.850,00 Excl. Tax
    available again from week no. 20/2024
    Manual swivel bending machine SBM 1270x2.0 HSS
    € 3.180,00
    € 3.180,00 Incl. Tax
    € 2.650,00 Excl. Tax
    In stock, immediately available
    Hydraulic profile steel shear and hole punch SPS 85
    € 34.296,00
    € 34.296,00 Incl. Tax
    € 28.580,00 Excl. Tax
    Not available at the moment or only on request!
    Manual swivel bending machine SBM 1270x2.0 HS
    € 2.868,00
    € 2.868,00 Incl. Tax
    € 2.390,00 Excl. Tax
    available again from week no. 18/2024
    Horizontal Bending Press PREMIUM EHB28
    € 18.354,00
    € 18.354,00 Incl. Tax
    € 15.295,00 Excl. Tax
    Not available at the moment or only on request!
    Hydraulic profile steel shear and hole punch SPS 45
    € 15.432,00
    € 15.432,00 Incl. Tax
    € 12.860,00 Excl. Tax
    In stock, immediately available
    Hydraulic profile steel shear and hole punch SPS 65 Bearing machines with Kingsland holder
    Stamp 9001
    Die 9023
    € 21.276,00
    € 21.276,00 Incl. Tax
    € 17.730,00 Excl. Tax
    Residual amounts available
    Professional hydraulic punching machine PREMIUM PES 16
    € 9.312,00
    € 9.312,00 Incl. Tax
    € 7.760,00 Excl. Tax
    Not available at the moment or only on request!
    Professional eccentric punching machine PREMIUM PES 10/4
    € 5.982,00
    € 5.982,00 Incl. Tax
    € 4.985,00 Excl. Tax
    Not available at the moment or only on request!
    Hydraulic profile steel shear and hole punch SPS 60 Mubea holder
    Die size 3/2/1
    Stamp size 3/2
    € 16.320,00
    € 16.320,00 Incl. Tax
    € 13.600,00 Excl. Tax
    In stock, immediately available
    Motorised swivel bending machine Model MSTSM-SH 2020x3.0 mm
    € 49.380,00
    € 49.380,00 Incl. Tax
    € 41.150,00 Excl. Tax
    Not available at the moment or only on request!
    Motorised swivel bending machine Model MSTSM-S 1270x4.0 mm
    € 42.456,00
    € 42.456,00 Incl. Tax
    € 35.380,00 Excl. Tax
    Not available at the moment or only on request!
    Motorised swivel bending machine Model MSTSM-SH 1270x4 mm
    € 46.716,00
    € 46.716,00 Incl. Tax
    € 38.930,00 Excl. Tax
    Not available at the moment or only on request!
    Motorised swivel bending machine Model MSTSM-SH 4020x1.5 mm
    € 73.320,00
    € 73.320,00 Incl. Tax
    € 61.100,00 Excl. Tax
    Not available at the moment or only on request!
    Motorised swivel bending machine Model MSTSM-S 4020x15 mm
    € 71.976,00
    € 71.976,00 Incl. Tax
    € 59.980,00 Excl. Tax
    Not available at the moment or only on request!
    Motorised swivel bending machine Model MSTSM-SH 3020x2.0 mm
    € 59.184,00
    € 59.184,00 Incl. Tax
    € 49.320,00 Excl. Tax
    Not available at the moment or only on request!
    Motorised swivel bending machine Model MSTSM-SH 2520x2.5 mm
    € 56.988,00
    € 56.988,00 Incl. Tax
    € 47.490,00 Excl. Tax
    Not available at the moment or only on request!
    Motorised swivel bending machine Model MSTSM-S 1520x3.5 mm
    € 43.356,00
    € 43.356,00 Incl. Tax
    € 36.130,00 Excl. Tax
    Not available at the moment or only on request!
    Hydraulic workshop press with edge folding device PREMIUM WPMAV 100 (D=1020)
    € 17.280,00
    € 17.280,00 Incl. Tax
    € 14.400,00 Excl. Tax
    Not available at the moment or only on request!
    Hydraulic workshop press with edge folding device PREMIUM WPMAV 100 (D=1520)
    € 19.680,00
    € 19.680,00 Incl. Tax
    € 16.400,00 Excl. Tax
    Not available at the moment or only on request!
    Motorised swivel bending machine Model MSTSM-SH 1520x3.5 mm
    € 48.276,00
    € 48.276,00 Incl. Tax
    € 40.230,00 Excl. Tax
    Not available at the moment or only on request!
    Motorised swivel bending machine Model MSTSM-S 3020x2.0 mm
    € 57.816,00
    € 57.816,00 Incl. Tax
    € 48.180,00 Excl. Tax
    Not available at the moment or only on request!
    Motorised swivel bending machine Model MSTSM-S 2520x2.5 mm
    € 55.356,00
    € 55.356,00 Incl. Tax
    € 46.130,00 Excl. Tax
    Not available at the moment or only on request!
    Manual swivel bending machine Model SBM-S 2020x1.5 - “orange” pattern
    € 0,00
    excluding shipping costs
    In stock, immediately available
    Hydraulic profile steel shear and hole punch PLC 175
    € 72.606,00
    € 72.606,00 Incl. Tax
    € 60.505,00 Excl. Tax
    Not available at the moment or only on request!
    Hydraulic profile steel shear and hole punch SPS 115
    € 35.580,00
    € 35.580,00 Incl. Tax
    € 29.650,00 Excl. Tax
    Not available at the moment or only on request!

    This article includes the ELMAG START-UP SERVICE.
    Further information can be found HERE or at elmag.at/startupservice

    Benefit from a 2-year ELMAG warranty
    or extend it to 3 years by registering at
    elmag.eu/3years

    Quick enquiry

    The data entered above is stored and processed by "ELMAG Entwicklungs und Handels GmbH", Hannesgrub Nord 19 - A-4911 Ried / Tumeltsham and the service providers (marketing agency, hosting partner, ERP software partner) commissioned by "ELMAG Entwicklungs und Handels GmbH", for the purpose of processing and answering my request. For more information, please see our privacy policy.

     

    Shipping duration display on product detail page:
    This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.