Electrode welding inverter SD 2560T 'Multi Line' incl. 3 m earth cable 35 mm² & 4 m E-holder cable 35 mm²
Incl. Tax: € 790,80 -6%
- Suitable for repair/assembly shops, trade, medium industry, outdoor welding
or offshore, agriculture, metal construction and pipeline construction - Digital display for welding current (A), welding voltage (V) and special functions
- Energy-saving thanks to thermally controlled fan
- The high efficiency meets the strict EU standards for the environmentally friendly design of welding equipment
- HOT START+ (adjustable 0-10%): Ignition current increase ensures better arc ignition
- ARC FORCE+ (adjustable 0-10%): Welding current increase when approaching the workpiece too closely by
preventing sticking of the rod electrode and achieve more uniform welding and deeper penetration - ANTI STICK: Automatic welding current reduction in case of sticking of the electrode to prevent annealing and to be able to release it more easily
- VRD (Voltage Reduction Device): Selectable safety system to reduce the output voltage at no-load to reduce the risk of electric shock
- LIFT TIG: Improved ignition properties for TIG welding, workpiece with tungsten electrode
touch, pull up 1-3 mm then ignition takes place and the welding process continues with the set welding current - GEN POWER: Operation possible by means of voltage-regulated current generator
- EXTENSION: Can be used with up to 100 m extension cable (5 x 2.5 mm²)
welding electrodes diameter: 230 V: MMA 1.6-5.0 mm / TIG 1.0-3.2 mm
Downloads
- Suitable for repair/assembly shops, trade, medium industry, outdoor welding
or offshore, agriculture, metal construction and pipeline construction - Digital display for welding current (A), welding voltage (V) and special functions
- Energy-saving thanks to thermally controlled fan
- The high efficiency meets the strict EU standards for the environmentally friendly design of welding equipment
- HOT START+ (adjustable 0-10%): Ignition current increase ensures better arc ignition
- ARC FORCE+ (adjustable 0-10%): Welding current increase when approaching the workpiece too closely by
preventing sticking of the rod electrode and achieve more uniform welding and deeper penetration - ANTI STICK: Automatic welding current reduction in case of sticking of the electrode to prevent annealing and to be able to release it more easily
- VRD (Voltage Reduction Device): Selectable safety system to reduce the output voltage at no-load to reduce the risk of electric shock
- LIFT TIG: Improved ignition properties for TIG welding, workpiece with tungsten electrode
touch, pull up 1-3 mm then ignition takes place and the welding process continues with the set welding current - GEN POWER: Operation possible by means of voltage-regulated current generator
- EXTENSION: Can be used with up to 100 m extension cable (5 x 2.5 mm²)
Advantages
- Suitable for repair/assembly shops, trade, medium industry, outdoor welding
or offshore, agriculture, metal construction and pipeline construction - Digital display for welding current (A), welding voltage (V) and special functions
- Energy-saving thanks to thermally controlled fan
- The high efficiency meets the strict EU standards for the environmentally friendly design of welding equipment
- HOT START+ (adjustable 0-10%): Ignition current increase ensures better arc ignition
- ARC FORCE+ (adjustable 0-10%): Welding current increase when approaching the workpiece too closely by
preventing sticking of the rod electrode and achieve more uniform welding and deeper penetration - ANTI STICK: Automatic welding current reduction in case of sticking of the electrode to prevent annealing and to be able to release it more easily
- VRD (Voltage Reduction Device): Selectable safety system to reduce the output voltage at no-load to reduce the risk of electric shock
- LIFT TIG: Improved ignition properties for TIG welding, workpiece with tungsten electrode
touch, pull up 1-3 mm then ignition takes place and the welding process continues with the set welding current - GEN POWER: Operation possible by means of voltage-regulated current generator
- EXTENSION: Can be used with up to 100 m extension cable (5 x 2.5 mm²)
More Information
EAN-Number | 9004853150203 |
---|---|
No parcel service shipping | Yes |
Article Group "Special Programme" | Yes |
Product-Highlights |
|
Substitute product | 55447 |
Files | |
ELMAG - Technical details | elmag_merk_269 | 230 V: MMA 1.6-5.0 mm / TIG 1.0-3.2 | mm \ elmag_merk_256 | MMA/WIG: 10-250 | A \ elmag_merk_258 | MMA/WIG: 100 / 200 | A \ elmag_merk_260 | MMA/WIG: 60 / 250 | % / A \ AAC617f001 | 64 | V \ elmag_merk_261 | 400 / 3 | V / ~ \ elmag_merk_274 | 230 V: MMA/WIG +10 / -10 | % \ elmag_merk_262 | 16 | AT \ EAA670f001 | 23 | \ elmag_merk_2165 | 80 | % \ elmag_merk_2166 | 29.4 | W \ elmag_merk_279 | 230 V: MMA 20 / 15.5 A | WIG 16 / 12.4 | A \ elmag_merk_834 | 13 / 35 | O / mm2 \ elmag_merk_264 | CEE 16 A | \ AAA472f001 | 190 | mm \ AAA031f001 | 365 | mm \ AAA003f001 | 11.3 | kg \ |
Low Stock Amount | 12 |
ELMAG goods group | 1 |
Filter-Category | Maschinen/Geräte |
3 years warranty possible | full |
Planned stock decrease | 0 |
Planned stock increase | 20 |
Passendes Zubehör | 56381|54242|54240|15810|54106|55716|15135|55713|15811 |
HNP/SP-Price | € 495,00 |
HNP/SP-Special price | € 464,00 |
Special Price Info | Anniversary Highlights November 2024 - February 2025 |
Special Price Info HNP/SP | Anniversary Highlights November 2024 - February 2025 |
HNP/SP-Info Tier | 1,495.00 |
Staffel HNP/SP-Sonderpreis-Info | 1,464.00|2,441.00 |
HNP/SP-Preis 39 | € 525,00 |
HNP/SP-Sonderpreis 39 | € 492,00 |
Staffel HNP/SP-Info 39 | 1,525.00 |
Staffel HNP/SP-Sonderpreis-Info 39 | 1,492.00|2,468.00 |
Previous URL Key | electrode-welding-inverter-sd-2560t-15020 |
Specifications
welding electrodes diameter | 230 V: MMA 1.6-5.0 mm / TIG 1.0-3.2 mm |
welding current setting | MMA/WIG: 10-250 A |
100 % welding power source (10 min at 40 °C) at welding current | MMA/WIG: 100 / 200 A |
welding power source (10 min at 40 °C) at welding current | MMA/WIG: 60 / 250 % / A |
Open circuit voltage | 64 V |
voltage / phases | 400 / 3 V / ~ |
power tolerance | 230 V: MMA/WIG +10 / -10 % |
anti-surge fuse | 16 AT |
Degree of protection (IP) | 23 |
Efficiency | 80 % |
power consumption in idle mode | 29.4 W |
input power l1 max. / l1 eff. | 230 V: MMA 20 / 15.5 A | WIG 16 / 12.4 A |
ground connection plug / cross-section | 13 / 35 O / mm2 |
connector | CEE 16 A |
Depth | 190 mm |
Height | 365 mm |
Weight | 11.3 kg |
Substitute
This article could be an alternative for you:
Downloads
Automatic head welding shield L-TC ELMAG MultiSafeVario, DIN 4/9-13,
incl. 3 pcs. exterior cover glass
& 1 pc. inner glass overlay, and
colour cardboard packaging
Incl. Tax: € 79,80 -38%
Argon 4.6 steel cylinder 20l / 200bar, filled UN 1006 Argon, compressed, class 2, ADR *Transport without exceeding the exemption limits specified in 1.1.3.6
Argon 4.6 steel cylinder 10l / 200bar, filled UN 1006 Argon, compressed, class 2, ADR *Transport without exceeding the exemption limits specified in 1.1.3.6
TIG hose package SRC 26V/4m gas-cooled, plug Ø 13mm 35/50mm² including gas hose with Quick Fit plug DN 5, including 19-piece original equipment set (180A DC/125A AC @ 35% duty cycle)
Pressure regulator “Argon/CO2/mixed gas”, “MINI+QUICK FIT” series 200 bar, working range 0-12 lt./min. /0-24 CFH/0-6 bar, with 2 pressure gauges Ø 50 mm, cylinder connection W21.8x1/14' RH/SW30, incl. quick coupling DN5
Welding electrodes MT-RR6 et 4,0x350mm (approx. 90 pcs./ 4,4kg.) pack)
- successor to OK 43.32, PH28/oh and PH42/k
Batch no.:
Gas hose 2.5 m for Argon/Co2 including Quick Fit DN5 coupling & plug-in nozzle
Welding electrodes MT-RR6 et 2,0x300mm (approx. 365 pcs./ 4,0kg.) pack)
- successor to OK 43.32, PH28/oh and PH42/k
Batch no.:
Incl. Tax: € 444,00 -11%
1 pc. welding inverter
SD 2035M PFC/MV incl. welding cable
Art. No. 15015
1 pc. PVC transport case
Art. no.: 55441
1 pck. Rutile welding electrodes
Ø 2.5 mm (20 pcs./pck.)
Art. no. 55734
1 pck. Rutile welding electrodes
Ø 3.2 mm (20 pcs./pck.)
Art. no. 55735
Incl. Tax: € 646,80 -17%
Incl. Tax: € 502,80 -5%
Incl. Tax: € 454,80 -5%
Incl. Tax: € 385,20 -13%
1 pc. POWER ROD 250/T cell “PFC”
400 volts, CEBORA art. 514
(suitable for generator, suitable for cel.)
Art. no. 58448
1 pc. welding station equipment 35sqmm
3+4m, plug Ø 13mm 35/50
Art. no. 55296
1 pck. Rutile welding electrodes Ø
Ø 2.5 mm (20 pcs./pck.)
Art. no. 55734
1 pck. Rutile welding electrodes Ø
Ø 3.2 mm (20 pcs./pck.)
Art. no. 55735
1 pc. automatic welding shield
ELMAG MultiSafeVario, DIN 4/9-13, L-TC
Art. no. 56381
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
Incl. Tax: € 2.700,00 -25%
1 pc. welding inverter
SD 1635M PFC/MV incl. welding cable
Art. No. 15010
1 pc. PVC transport case
Art. no.: 55441
1 pck. Rutile welding electrodes
Ø 2.5 mm (20 pcs./pck.)
Art. no. 55734
1 pck. Rutile welding electrodes
Ø 3.2 mm (20 pcs./pck.)
Art. no. 55735
Incl. Tax: € 586,80 -16%
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
(suitable for generator)
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
1 pc. POWER ROD 180/M “PFC”
230 volts, CEBORA art. 506
(suitable for generator)
Art. no. 58444
1 pc. welding station equipment 25sqmm
3+4m, plug Ø 19mm 16/25
Art. no. 55291
1 pck. Rutile welding electrodes Ø
Ø 2.5 mm (20 pcs./pck.)
Art. no. 55734
1 pck. Rutile welding electrodes Ø
Ø 3.2 mm (20 pcs./pck.)
Art. no. 55735
1 pc. automatic welding shield
ELMAG MultiSafeVario, DIN 4/9-13, L-TC
Art. no. 56381
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
Incl. Tax: € 1.332,00 -19%
Incl. Tax: € 1.522,80 -6%
1 pc. POWER ROD 380/T cell “PFC”
400 volts, CEBORA art. 519
Art. no. 58453
1 pc. welding station equipment 50sqmm
3+4m, plug Ø 13mm 35/50
Art. no. 55297
1 pck. Rutile welding electrodes Ø
Ø 2.5 mm (20 pcs./pck.)
Art. no. 55734
1 pck. Rutile welding electrodes Ø
Ø 3.2 mm (20 pcs./pck.)
Art. no. 55735
1 pc. automatic welding shield
ELMAG MultiSafeVario, DIN 4/9-13, L-TC
Art. no. 56381
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
(suitable for generator)
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
1 pc. POWER ROD 200/M cell “PFC”
230 volts, CEBORA art. 520
(suitable for generators)
Art. no. 58441
1 pc. welding station equipment 25mm2
3+4m, plug ø 13mm 35/50
Art. no. 55292
1 pack rutile welding electrodes
Ø 2.5mm (20 pcs./pack)
Art. no. 55734
1 pack rutile welding electrodes
Ø 3.2mm (20 pcs./pack)
Art. no. 55735
1 pc. automatic welding helmet
ELMAG MultiSafeVario, DIN 4/9-13, L-TC
Art. no. 56381
APPLY FOR UP TO 24 MONTHS WARRANTY NOW!
To claim this, simply register up to 15 days from the date of purchase at https://www.cebora.it/garanzie/frontend/.
(suitable for generator)
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
Shipping duration display on product detail page:
This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.