CEBORA PLASMA iQC 45/M Plasma Inverter, Part No. 612 Includes CP45C MAR/4m burner with Esafast® adapter (Part No. 1634) and 10mm²/4m ground cable
APPLY NOW FOR UP TO A 24-MONTH WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of the purchase date.
CEBORA serial no.:
€ 3.348,00
€ 3.348,00
Incl. Tax
€ 2.790,00
Excl. Tax
In stock
SKU
- Control panel with a high-resolution 3.2-inch colour LCD display
- Synergistic adjustment of cutting parameters
- Display of the number and duration of ignitions and the total cutting time
- Automatic detection of burner model, type and length via a hardware key
- Colour graphic display showing the set of consumables in use
- “Self Restart” function for continuous cutting of metal grids without the pilot arc going out; “Mark” function for marking/labeling with gas or compressed air up to 5 A for position markings for subsequent processing steps, markings such as serial numbers or part numbers, bending lines or welding aids, etc., and “Spot” for marking drill holes to eliminate the need for center punching or for setting spot marks.
Operating modes:
- Oxy-fuel cutting: Air and nitrogen (N2)
- Marking with gas or air (up to 5 A)
- Spot function for spot marking - The new CEBORA CP45C MAR torch (item no. 1634), which is 4 metres long and must be connected to the power source using an ESAFast® adapter, features a patented air/gas flow system with extremely low air consumption. ESAFast® is the new 11-pin central adapter with a compact and ergonomic hexagonal design, which serves as the inspiration for its shape.
- Option to update the software via a USB stick
- With the CEBORA “On-Air” ignition system
- DC constant-current source with SiC (compliant with EN 61000-3-12)
- Reduced power consumption, high mains voltage tolerance, compact size and low heat generation, higher duty cycle
- MULTIVOLTAGE design: Ensures a wider range of applications, including overseas where the mains supply is 110V
- Manual operation with the CP45C MAR plasma torch package
- Automatic operation with CP 71C DAR plasma torch package and interface circuit (optional accessory)
- Can be operated using a power generator (min. 10 kVA); AVR control recommended
- Extremely low air consumption: just 65 l/min at 3.5 bar
- Very light – only 8 kg
In stock, immediately available
Article Number: 56800
|
EAN: 9004853568008
Now included for a short time free of charge:
recommendet cutting strength steal: 0 - 12 mm
Downloads
- Control panel with a high-resolution 3.2-inch colour LCD display
- Synergistic adjustment of cutting parameters
- Display of the number and duration of ignitions and the total cutting time
- Automatic detection of burner model, type and length via a hardware key
- Colour graphic display showing the set of consumables in use
- “Self Restart” function for continuous cutting of metal grids without the pilot arc going out; “Mark” function for marking/labeling with gas or compressed air up to 5 A for position markings for subsequent processing steps, markings such as serial numbers or part numbers, bending lines or welding aids, etc., and “Spot” for marking drill holes to eliminate the need for center punching or for setting spot marks.
Operating modes:
- Oxy-fuel cutting: Air and nitrogen (N2)
- Marking with gas or air (up to 5 A)
- Spot function for spot marking - The new CEBORA CP45C MAR torch (item no. 1634), which is 4 metres long and must be connected to the power source using an ESAFast® adapter, features a patented air/gas flow system with extremely low air consumption. ESAFast® is the new 11-pin central adapter with a compact and ergonomic hexagonal design, which serves as the inspiration for its shape.
- Option to update the software via a USB stick
- With the CEBORA “On-Air” ignition system
- DC constant-current source with SiC (compliant with EN 61000-3-12)
- Reduced power consumption, high mains voltage tolerance, compact size and low heat generation, higher duty cycle
- MULTIVOLTAGE design: Ensures a wider range of applications, including overseas where the mains supply is 110V
- Manual operation with the CP45C MAR plasma torch package
- Automatic operation with CP 71C DAR plasma torch package and interface circuit (optional accessory)
- Can be operated using a power generator (min. 10 kVA); AVR control recommended
- Extremely low air consumption: just 65 l/min at 3.5 bar
- Very light – only 8 kg
Advantages
- Control panel with a high-resolution 3.2-inch colour LCD display
- Synergistic adjustment of cutting parameters
- Display of the number and duration of ignitions and the total cutting time
- Automatic detection of burner model, type and length via a hardware key
- Colour graphic display showing the set of consumables in use
- “Self Restart” function for continuous cutting of metal grids without the pilot arc going out; “Mark” function for marking/labeling with gas or compressed air up to 5 A for position markings for subsequent processing steps, markings such as serial numbers or part numbers, bending lines or welding aids, etc., and “Spot” for marking drill holes to eliminate the need for center punching or for setting spot marks.
Operating modes:
- Oxy-fuel cutting: Air and nitrogen (N2)
- Marking with gas or air (up to 5 A)
- Spot function for spot marking - The new CEBORA CP45C MAR torch (item no. 1634), which is 4 metres long and must be connected to the power source using an ESAFast® adapter, features a patented air/gas flow system with extremely low air consumption. ESAFast® is the new 11-pin central adapter with a compact and ergonomic hexagonal design, which serves as the inspiration for its shape.
- Option to update the software via a USB stick
- With the CEBORA “On-Air” ignition system
- DC constant-current source with SiC (compliant with EN 61000-3-12)
- Reduced power consumption, high mains voltage tolerance, compact size and low heat generation, higher duty cycle
- MULTIVOLTAGE design: Ensures a wider range of applications, including overseas where the mains supply is 110V
- Manual operation with the CP45C MAR plasma torch package
- Automatic operation with CP 71C DAR plasma torch package and interface circuit (optional accessory)
- Can be operated using a power generator (min. 10 kVA); AVR control recommended
- Extremely low air consumption: just 65 l/min at 3.5 bar
- Very light – only 8 kg
Specifications
| recommendet cutting strength steal | 0 - 12 mm |
| separating cut steal | 30 mm |
| cutting current setting | 230V: 5 - 45 | 115V: 5 - 25 A |
| electrical cutting current regulation | stufenlos |
| 60 % welding power source (10 min. at 40 °C) at welding current | 15 - 30 A |
| duty cycle at max. welding power | 230V: 45% @45A | 115V: 40% @25A |
| input power l1 max. / l1 eff. | 230V: 24 / 16 A | 115V: 25 / 16 A A |
| voltage / phases | 230 / 1 | 115 V / 1 V / ~ |
| Mains frequency | 50 / 60 Hz |
| power tolerance | + 15% / - 20 % % |
| anti-surge fuse | 16 AT AT |
| connector | Schuko 16 A |
| compressed air consumption | 65 l/min |
| Operational pressure | 3.5 bar |
| Width | 151 mm |
| Depth | 506 mm |
| Height | 355 mm |
| Weight | 8 kg |
| Type | 612 |
Downloads
Special pre-filter set for plasma cutting systems Separation efficiency up to max. 0.3µm,
consisting of:
Prefilter 'FUTURA' art. no. 42506 Differential
pressure indicator art. no. 9402207
Double nipple AG 1/4' x AG 1/4' separable
art. no. 42395
Plug nipple AG 1/4'
art. no. 42320
€ 190,80
€ 190,80
Incl. Tax
€ 159,00
Excl. Tax
In stock, immediately available
Compass set complete with guide carriage for burner CP40, CP41C, CP45C MAR, Art. 162
€ 237,60
€ 237,60
Incl. Tax
€ 198,00
Excl. Tax
In stock, immediately available
Guide carriage, loose for burner CP40, CP41C, CP45C MAR, Art. 157
€ 79,20
€ 79,20
Incl. Tax
€ 66,00
Excl. Tax
excluding shipping costs
In stock, immediately available
Transport trolley with 4 wheels art. 1653 suitable for Item 279 POWER PLASMA 3035/M, Item 612 iQC 45/M, Item 551 WIN TIG DC 180 M, Item 553 WIN TIG DC 220 M, Item 558 WIN TIG 180 AC-DC M, and various inverters
€ 405,60
€ 405,60
Incl. Tax
€ 338,00
Excl. Tax
In stock, immediately available
Nozzle guard for CP45C MAR, Part No. 2973
€ 31,80
€ 31,80
Incl. Tax
€ 26,50
Excl. Tax
excluding shipping costs
In stock, immediately available
Nozzle holder for burner CP45C MAR, Art. 2915
€ 48,00
€ 48,00
Incl. Tax
€ 40,00
Excl. Tax
excluding shipping costs
In stock, immediately available
Nozzle for burner CP45C MAR, Art. 2745 (5 pcs./Pkg.)
€ 33,60
€ 33,60
Incl. Tax
€ 28,00
Excl. Tax
excluding shipping costs
In stock, immediately available
Diffuser for burner CP41C & CP 45C MAR (2 pcs./Pkg.), Art. 1641
€ 84,60
€ 84,60
Incl. Tax
€ 70,50
Excl. Tax
excluding shipping costs
In stock, immediately available
Electrodes for burner CP41C & CP 45C MAR (5 pcs./Pkg.), Art. 1878
€ 42,60
€ 42,60
Incl. Tax
€ 35,50
Excl. Tax
excluding shipping costs
In stock, immediately available
Accessories and wear parts set For CP45C MAR plasma torches (5–45 A)
For PLASMA iQC 45 M
- Includes:
2 pcs. CP45C MAR diffuser (=1 pack of 2 pcs.)
Part No. 56814
5 pcs. CP45C MAR electrode (=1 pack/5 pcs. each)
Part No. 56813
5 pcs. CP45C MAR nozzle (=1 pack/5 pcs. each)
Item No. 57041
1 pc. Nozzle holder CP45C MAR
Item No. 2915
1 pc. Nozzle shield CP45C MAR
Item No. 2973
1 pc. Wear parts case
Item No. 9000917
€ 228,00
€ 228,00
Incl. Tax
€ 190,00
Excl. Tax
In stock, immediately available
JETZT BIS ZU 24 MONATE GARANTIE BEANTRAGEN!
Dazu einfach bis 15 Tage nach Kaufdatum unter https://welding.cebora.it/de/assistance/register-your-product registrieren.
CEBORA-Seriennr.:
€ 5.142,00
€ 5.142,00
Incl. Tax
€ 4.285,00
Excl. Tax
In stock, immediately available
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
€ 6.342,00
€ 6.342,00
Incl. Tax
€ 5.285,00
Excl. Tax
In stock, immediately available
APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.:
€ 8.448,00
€ 8.448,00
Incl. Tax
€ 7.040,00
Excl. Tax
available again from week no. 2/2027
This article includes the ELMAG START-UP SERVICE.
Further information can be found HERE or at elmag.at/startupservice
Shipping duration display on product detail page:
This product contains GeoLite2 data created by MaxMind and available at https://www.maxmind.com.
